11846
EarthTronics 4FT LED Vapor Tight features NFS, NEMA 4X and IP66 wet location rated Color and Wattage Selectable Vapor Tight LEDs designed for faster installation in commercial and industrial lighting applications. Ideal for food processing areas, commercial kitchens, cold storage, parking garages, walkways, stairwells, utility areas, under canopy, outdoor retail and other wet, dusty, and dirty environments, the Color and Wattage Selectable Vapor Tight LEDs are available in multiple color and watt combinations. The new Vapor Tight LEDs offer the choice of three temperatures (3500K, 4000K and 5000K) and feature a high 80+ CRI. Both the light color temperature and the lumen level can be set at the time of installation with a switch located on the LED module holder plate to ensure the proper lighting for improved visual acuity and application requirements. All the fixtures accept 120 – 277-volt AC power supply and are equipped with 12VDC auxiliary power prewired for easy installation of advanced lighting controls. In addition, they have a 0-10 volt dimming standard and will perform in temperatures ranging from -40°F (-40°C) to 104°F (40°C). To meet specific area energy codes an internal multi-function sensor can be installed and then operated with a remote test control to set occupancy, daylight harvesting and dim to off functions. An emergency back-up driver is available. Designed for simple installation, the vapor tight features a UL 94 5VA polycarbonate housing that allows the wires to be connected directly inside of the housing without internal junction box or silicone conduit. The lens and LED module board are both integrated. The gasket polycarbonate housing has stainless steel latches with a sealed lens that meets IP66-rated requirements for wash down and dusty conditions. The fixtures are suitable for applications that may M require wash down and/or experience cold temperatures or moderate impacts. DLC® listed.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The PFX-5608 is a highly versatile, 4-foot vapor-tight LED luminaire designed for durability and precision in demanding environments. This sensor-ready fixture features field-selectable CCT (3500K, 4000K, and 5000K) and tri-lumen output ranging from 5,000 to 7,000 nominal lumens, allowing for complete on-site customization. Built to last, it boasts an impressive L70 life of 178,000 hours and a rugged polycarbonate housing with an IK10 impact rating. It is engineered for extreme conditions with an IP65 ingress protection rating and an operating temperature range of -40 Degree C to 43 Degree C . The unit comes standard with a 0-10VDC dimming driver and offers optional emergency backups or NSF certification for food equipment zones. Installation is simplified with included surface mount kits and v-hooks, making it an ideal choice for both new construction and retrofits.
- category
- environment
- voltage
- CCT
- CRI
- beam angle
- +2 more
- voltage: 120V/347V/12DCV → UNV
- spec →
Our new LED Vapor Tight Fixture combines durability with versatility, making it ideal for harsh environments where moisture, dust, or debris are concerns. Designed with built-in dip switches, this fixture allows easy field selection of both CCT (Correlated Color Temperature) and wattage, giving you full control to match your specific lighting needs.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- voltage: 120V/347V/12DCV → UNV
- spec →
The Iridium i2 WaveStream luminaire merges classic design with cutting edge technology to provide quality illumination and superior optical control. Using the WaveStream LED direct/indirect light engine, its wide batwing distribution makes it an excellent choice for lower ceiling applications and areas where ceiling uniformity is important. Available in 4’ and 8’ sections with a multitude of options, the Iridium i2 WaveStream is well suited for commercial office spaces, schools, libraries and other architectural interiors. The WaveStream LED direct/indirect light engine is also available in several other popular Corelite series including the Element, Loft, Minigator and Vertechs.
- category
- environment
- voltage
- CCT
- CRI
- wattage
- +2 more
- voltage: 120V/347V/12DCV → UNV
- lumens: 11700 → 4912
- spec →
The VRVT1 series is the contractor go to complex environment luminaire that combines the rugged, wet location rated construction of a vaportite with selectable CCT and lumens. The VRVT1 is available in 4' and 8' sizes, performance up to 11,500 lumens with emergency back-up and sensor options. VRVT1 boasts an IK10 rated lens and housing sealed with Torx head tamper-resistant screws for added protection.
- category
- environment
- voltage
- CCT
- CRI
- wattage
- +2 more
- voltage: 120V/347V/12DCV → UNV
- spec →
Metalux LED High Bay with superior performance in a durable, compact design
- category
- environment
- voltage
- CCT
- CRI
- beam angle
- +1 more
- voltage: 120V/347V/12DCV → UNV
- lumens: 11700 → 30000
- wattage: 90W → 266W
- spec →
Designed for use in architectural and commercial applications with limited plenum height, the patented WaveStream optical technology provides uniform, glare-free illumination along with high efficacy, providing the perfect solution for high ceiling applications.
- category
- environment
- voltage
- CCT
- CRI
- wattage
- +1 more
- voltage: 120V/347V/12DCV → UNV
- spec →
Up to 85% optical efficiency with a wide variety of shielding options including slots, louvers, and perforation, Williams AI3 provides uniform indirect illumination with plenty of options to enhance the visual appeal of the fixture.
- category
- environment
- voltage
- lumens
- CRI
- wattage
- +1 more
- voltage: 120V/347V/12DCV → UNV
- cct: 3500/4000/5000K → 2700K
- spec →
Wall Pack Field Selectable Output & CCT The AMWM-CSR Full Cutoff Wall Pack from Best Lighting Products is engineered to meet the needs of communities prioritizing responsible outdoor lighting. With a true full cutoff design, the WPFCSR helps prevent light trespass and skyglow—making it ideal for projects that must comply with Dark-Skies legislation or local ordinances. Available in two high-output models, this wall pack delivers up to 17,186 lumens while allowing field-selectable color temperatures (3000K/4000K/5000K) for precise ambiance and application. Designed for durability, it features a bronze powder-coated, die-cast aluminum housing, IP65 and IK08 ratings, and an integrated photocell. 0–10V dimming and screw-in sensor readiness (with optional PIR or microwave sensors) ensure maximum energy efficiency. DLC Premium and cULus listed, this luminaire is backed by a 5-year warranty. Whether you're illuminating schools, walkways, or municipal buildings, the AMWM-CSR delivers high-performance lighting without polluting the night sky.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- voltage: 120V/347V/12DCV → UNV
- beam_angle: 40° → 121°
- spec →
The RINA ECO LED Series features sleek, luminairesavailable in standard diameters, custom sizes availableupon request. Choose from standard nishes in black,white, or request custom RAL colors. Dimming optionsinclude 0-10V, and Casambi. Various color temperatures(CCT) are available:, 3000K, 3500K, 4000K, and tunablewhite. With CRI options of 80+ and 90+, and optionalsensor technology, the RINA ECO LED Series providesversatile, high-quality lighting solutions tailored to yourneeds.
- category
- environment
- voltage
- lumens
- CCT
- spec delta
- voltage: 120V/347V/12DCV → UNV
- spec →
The NWL LED wraparound is an economical surface mount general illumination luminaire for use in commercial applications. The slender form and frosted lens create an appealing visual aesthetic. The built-in occupancy sensor and color selectable light output offer complete versatility.
- category
- environment
- voltage
- CCT
- CRI
- wattage
- +2 more
- voltage: 120V/347V/12DCV → UNV
- beam_angle: 40° → 115.8°
- spec →
The fixture emits symmetrical light directed downwards. The angle of the internal diffuser, together with the slightly curved top shade, ensures a wide band of glare-free, uniform lighting. Alfred Homann designed Kipp Post in 1997 for urban environments where both functional and pleasant lighting comfort was desired. Emphasis was also given to easy maintenance and bulb changes. The aim was for the light to have an expression that would make it suitable for both modern and classic architecture. A special system makes it easy to tilt the light head to for access to the electrical components.
- category
- environment
- voltage
- CCT
- CRI
- wattage
- +1 more
- voltage: 120V/347V/12DCV → 120V/277V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps EarthTronics
Full directory →18 rep agencies carry the EarthTronics line across 32 states. Pick your state.
Arkansas AR1 agency
- Curtis Stout, Inc.Current
Statewide
Colorado CO1 agency
Statewide
District of Columbia DC1 agency
Statewide
Florida FL1 agency
- FRM Lighting & ControlsCurrent
Fort Myers · Jacksonville · Miami · Orlando · Tampa
Georgia GA1 agency
- Lighting Associates, Inc.Acuity Brands
Atlanta · Savannah
Idaho ID1 agency
- The Reeves Company
Boise
Illinois IL1 agency
- Electrical Marketing Group
Central · Chicago
Indiana IN1 agency
- Energized Sales Company
Statewide
Iowa IA1 agency
- Perry & Associates
Statewide
Kansas KS1 agency
Statewide
+22 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.