PS PLUGIN SERIES
Plug-In drivers are commonly used for DC LED systems for an easy and quick installation. Recommended for small load applications. Available in 12V or 24V DC output. UL listed. MUST SPECIFY VOLTAGE WITH CATALOG NUMBER EXAMPLE : PS-45W-12V To maximize performance, do not load the power supply to more than 80% of its labeled rating. All power supplies listed above are UL listed with constant voltage output of 12V or 24V DC. FEATURESDOWNLOADS Key Features: ETL Listed: Certified to meet rigorous safety and performance standards by ETL (Intertek). CSA Certified: Complies with Canadian Standards Association requirements. Versatile Application: Suitable for both commercial and residential lighting installations. Flicker-Free Operation: Ensures smooth and stable light output without visible flickering. Nema 3R Rated Enclosure: Provides protection against rain, sleet, snow, and ice formation for outdoor use. Simplified Wiring: Includes a wiring compartment with knock-outs for clean and easy installation. ⬇️ 12V SPECIFICATION SHEET ⬇️ 24V SPECIFICATION SHEET
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
60W-400W LED power supplies with 0-10V dimming, surface mount, exterior rated, supporting 12VDC/24VDC products for smooth, versatile lighting control.
- category
- environment
- voltage
- spec delta
- wattage: 45W → 400W
Splits power line connector from LED drivers into two separate leads, requires power line cable. Voltage: 12V or 24V Length: 5" Finish: White Compatibility: 12V or 24V LED Drivers
- category
- environment
- voltage
- spec delta
- wattage: 45W → 302W
- spec →
Installation: Factory / Jobsite install through 1/2” knockout hole, 12V AUX power required
- category
- environment
- voltage
The Amico DC Lighting Controller (DCLC) is a modular multi-zone power supply system for LED lighting applications in the MRI environment. The DCLC provides quiet, reliable power anywhere in the imaging space and fits any lighting application from general down and directional lighting to custom slot lighting and image ceiling applications. Achieve multi-zone dimming through standard 0-10V wall box dimmers or Amico's mobile lighting application. This lighting controller is Certified to meet MRI vendor EMI requirements.
- category
- environment
- voltage
- spec →
The IGR331303 Centro; a fixed-aim, in-grade luminaire, is among the newest efforts from Auroralight. It is a small diameter, large aperture fixture that features our robust and popular Copper Core® LED module. The LED Module is Thermally Integrated® with a solid brass bezel for superior heat dissipation allowing peak performance and long life without color shift.
- category
- environment
- voltage
- spec delta
- wattage: 45W → 6W
- spec →
EarthTronics 4FT LED Vapor Tight features NFS, NEMA 4X and IP66 wet location rated Color and Wattage Selectable Vapor Tight LEDs designed for faster installation in commercial and industrial lighting applications. Ideal for food processing areas, commercial kitchens, cold storage, parking garages, walkways, stairwells, utility areas, under canopy, outdoor retail and other wet, dusty, and dirty environments, the Color and Wattage Selectable Vapor Tight LEDs are available in multiple color and watt combinations. The new Vapor Tight LEDs offer the choice of two temperatures (4000K and 5000K) and feature a high 80+ CRI. Both the light color temperature and the lumen level can be set at the time of installation with a switch located on the LED module holder plate to ensure the proper lighting for improved visual acuity and application requirements. All the fixtures accept 120 – 347-volt AC power supply and are equipped with 12VDC auxiliary power prewired for easy installation of advanced lighting controls. In addition, they have a 0-10 volt dimming standard and will perform in temperatures ranging from -40°F (-40°C) to 122°F (50°C) when suspended at least 18″ from ceiling. To meet specific area energy codes an internal multi-function sensor can be installed and then operated with a remote test control to set occupancy, daylight harvesting and dim to off functions. An emergency back-up driver is available. Designed for simple installation, the vapor tight features a UL 94 5VA polycarbonate housing that allows the wires to be connected directly inside of the housing without internal junction box or silicone conduit. The gasket polycarbonate housing has stainless steel latches with a sealed lens that meets IP66-rated requirements for wash down and dusty conditions. The fixtures are suitable for applications that may require wash down and/or experience cold temperatures or moderate impacts. DLC® listed product.
- category
- environment
- voltage
- spec delta
- wattage: 45W → 200W
- spec →
The BCM01 provides luminaire-level lighting control in a compact design. It operates on a 12VDC input from a dimmable, dim-to-off LED driver. The module works seamlessly in conjuction with the SC010 to enable wireless control of fixtures, or groups of fixtures, through the LiteSmart app.
- category
- environment
- voltage
- spec →
The NLCSPEJ is a low-voltage Bluetooth wireless PIR/Daylight sensor with a 3.5mm Jack/AUX connector, designed for the NICOR NLC System, perfect for Luminaire Level Lighting Controls (LLLCs). Constructed from high-rated fire retardant material, this sensor offers easy installation and use, with a plug-n-play system for fixtures with a 12V output 3.5mm jack sensor socket ready. Providing 360° coverage at heights from 20Ft to 40Ft, it offers long-term flexibility, better occupant experience, and cost efficiency compared to non-controlled fixtures, making it ideal for warehouses, garages, gymnasiums, and other industrial spaces.
- category
- environment
- voltage
- spec delta
- wattage: 45W → 0.6W
- spec →PureEdge LightingPure Smart™ CV96W DW Bridgebox 12V-24VDC, Single Channel Static White, Connected By WIZ Propartial
The Pure Smart™ CV96W Bridgebox DW enables wireless control of a constant voltage, Single Channel, Static White (excluding Warm Dim strip) LED load with the WiZ Pro wireless control ecosystem. The CV96W has both Wi-Fi and Bluetooth connectivity. No Hub Required. Voice control can be achieved by integrating with Alexa, Google Assistant, Siri Shortcuts, Smartthings, and IFTTT. Only for use with a non-dimmable driver (PSBR- 96W-24VDC sold separately)
- category
- environment
- voltage
- spec delta
- wattage: 45W → 600W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →