11901
EarthTronics 4FT LED Vapor Tight features NFS, NEMA 4X and IP66 wet location rated Color and Wattage Selectable Vapor Tight LEDs designed for faster installation in commercial and industrial lighting applications. Ideal for food processing areas, commercial kitchens, cold storage, parking garages, walkways, stairwells, utility areas, under canopy, outdoor retail and other wet, dusty, and dirty environments, the Color and Wattage Selectable Vapor Tight LEDs are available in multiple color and watt combinations. The new Vapor Tight LEDs offer the choice of two temperatures (4000K and 5000K) and feature a high 80+ CRI. Both the light color temperature and the lumen level can be set at the time of installation with a switch located on the LED module holder plate to ensure the proper lighting for improved visual acuity and application requirements. All the fixtures accept 120 – 347-volt AC power supply and are equipped with 12VDC auxiliary power prewired for easy installation of advanced lighting controls. In addition, they have a 0-10 volt dimming standard and will perform in temperatures ranging from -40°F (-40°C) to 122°F (50°C) when suspended at least 18″ from ceiling. To meet specific area energy codes an internal multi-function sensor can be installed and then operated with a remote test control to set occupancy, daylight harvesting and dim to off functions. An emergency back-up driver is available. Designed for simple installation, the vapor tight features a UL 94 5VA polycarbonate housing that allows the wires to be connected directly inside of the housing without internal junction box or silicone conduit. The gasket polycarbonate housing has stainless steel latches with a sealed lens that meets IP66-rated requirements for wash down and dusty conditions. The fixtures are suitable for applications that may require wash down and/or experience cold temperatures or moderate impacts. DLC® listed product.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Metalux VT4 LED Series is an energy efficient industrial Vaportite fixture that features rugged and durable construction. The VT4 LED incorporates a full metal tray and heat sink inside a reinforced sealed and gasketed fiberglass housing with a high impact diffuser. This Vaportite series is suitable for interior and exterior applications and can be surface, chain, cable or stem mounted.
- category
- environment
- lumens
- CCT
- CRI
- wattage
- +1 more
- voltage: 12DCV → UNV
- spec →
The LRUFO is a UFO high bay suitable for indoor and outdoor use.
- category
- environment
- lumens
- CCT
- CRI
- wattage
- +1 more
- voltage: 12DCV → UNV
- spec →
Washdown / Food Service / NSF 2 Rated The Maestro™ is designed for the harsh environments found in food processing, heavy industrial manufacturing, warehouse, and distribution facilities. The IP66 waterproof design is an ideal task light to retrofit existing linear fluorescent as well as HID high-bay fixtures. NSF 2 – FOOD SPLASH ZONE An ETL sanitation mark on food service equipment that indicates equipment is tested to ANSI/NSF 2 and is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced
- category
- environment
- lumens
- CCT
- wattage
- spec delta
- voltage: 12DCV → 120V/277V
- spec →
Spec Sheet IES Files Housing: White Composted Fiberglass Listing & Ratings: ETL Wet Listed Under UL1598 Specifications; RoHS Compliant, IP66, ETL Sanitation Certified to National Sanitation Foundation ANSI NSF2 Food Splash Zone Lens: Clear or Frosted Impact Resistant Acrylic Lens, Frosted Polycarbonate Mounting Options: Surface Mount or Chain Mount LED: 3000K, 3500K, or 4000K Array Wattage: 110w, 130w, 155w & 180w 17,600-28,800 Lumens
- category
- environment
- lumens
- CCT
- wattage
- spec delta
- voltage: 12DCV → 120V/277V
- spec →
The PFX-5608 is a highly versatile, 4-foot vapor-tight LED luminaire designed for durability and precision in demanding environments. This sensor-ready fixture features field-selectable CCT (3500K, 4000K, and 5000K) and tri-lumen output ranging from 5,000 to 7,000 nominal lumens, allowing for complete on-site customization. Built to last, it boasts an impressive L70 life of 178,000 hours and a rugged polycarbonate housing with an IK10 impact rating. It is engineered for extreme conditions with an IP65 ingress protection rating and an operating temperature range of -40 Degree C to 43 Degree C . The unit comes standard with a 0-10VDC dimming driver and offers optional emergency backups or NSF certification for food equipment zones. Installation is simplified with included surface mount kits and v-hooks, making it an ideal choice for both new construction and retrofits.
- category
- environment
- CRI
- beam angle
- housing
- spec delta
- voltage: 12DCV → UNV
- cct: 4000/5000K → 3500K
- spec →
The VRVT1 series is the contractor go to complex environment luminaire that combines the rugged, wet location rated construction of a vaportite with selectable CCT and lumens. The VRVT1 is available in 4' and 8' sizes, performance up to 11,500 lumens with emergency back-up and sensor options. VRVT1 boasts an IK10 rated lens and housing sealed with Torx head tamper-resistant screws for added protection.
- category
- environment
- CCT
- CRI
- housing
- spec delta
- voltage: 12DCV → UNV
- wattage: 200W → 78W
- spec →
The ALS Standard LED Area Light offers a versatile security lighting solution with Dusk to Dawn settings and five selectable CCT color temperatures (3000K-6500K). It features a dedicated 6000 lumen brightness, rugged die-cast aluminum housing, and easy mounting options. With a 50,000-hour lifespan, UV-resistant prismatic PC lens, and universal power supply (120-277V), this light ensures reliable performance.
- category
- environment
- CCT
- wattage
- spec delta
- voltage: 12DCV → 277V
- lumens: 32000 → 6000
- spec →
Lumark® NFFLD Night Falcon Series
- category
- environment
- lumens
- CCT
- beam angle
- spec delta
- voltage: 12DCV → 277V/347V/480V
- wattage: 200W → 450W
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- CCT
- beam angle
- spec delta
- voltage: 12DCV → 277V/347V/480V
- lumens: 32000 → 3828
- wattage: 200W → 67W
- spec →
The RINA ECO LED Series features sleek, luminaires available in standard diameters, custom sizes available upon request. Choose from standard finishes in black, white, or request custom RAL colors. Dimming options include 0-10V, and Casambi. Various color temperatures (CCT) are available:, 3000K, 3500K, 4000K, and tunable white. With CRI options of 80+ and 90+, and optional sensor technology, the RINA ECO LED Series provides versatile, high-quality lighting solutions tailored to your needs.
- category
- environment
- CCT
- wattage
- spec delta
- voltage: 12DCV → UNV
- lumens: 32000 → 15300
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps EarthTronics
Full directory →18 rep agencies carry the EarthTronics line across 32 states. Pick your state.
Arkansas AR1 agency
- Curtis Stout, Inc.Current
Statewide
Colorado CO1 agency
Statewide
District of Columbia DC1 agency
Statewide
Florida FL1 agency
- FRM Lighting & ControlsCurrent
Fort Myers · Jacksonville · Miami · Orlando · Tampa
Georgia GA1 agency
- Lighting Associates, Inc.Acuity Brands
Atlanta · Savannah
Idaho ID1 agency
- The Reeves Company
Boise
Illinois IL1 agency
- Electrical Marketing Group
Central · Chicago
Indiana IN1 agency
- Energized Sales Company
Statewide
Iowa IA1 agency
- Perry & Associates
Statewide
Kansas KS1 agency
Statewide
+22 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.