1572LED
The BOW'S LED features a smooth arched profile with vertically mirrored bows which produce a symmetrical LED wall wash. Perfect for common areas and corridors in commercial offices, hotels and residential spaces. This unit features acrylic top and bottom covers to protect the light source.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →BeveLED Mini Primary NXT P3RW-NXT Round 3 inch aperture LED wall wash provides our classic beveled trim aesthetic in a circular aperture with a small housing at a budget friendly price point for architectural projects.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
A tubular acrylic diffuser paired with a stamped steel back plate in Satin Nickel adds contemporary styling to a value-priced sconce. Finishes: Satin Nickel, Other (Special Order)Sizes: 14inCCT: 27K, 30K, 35K, 40K
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- spec →
The iO CoviO provides architectural cove lighting and allows for continuity of light from indoor to outdoor spaces due to its IP66 rating and small size. The CoviO delivers functional cove lighting with 3 lumen output options up to 1500 lm/ft. With standard integral 0-10V dimming from 100% to 1%, the CoviO delivers a full range of output from functional illumination to a subtle decorative glow. The standard 90 CRI LED module delivers high quality, clean, uniform cove lighting for up to 300 ft from a single power drop.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 12W → 5.1W
- spec →
4" Width, 8" Length
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
Sabre is a surface-mounted, tubular architectural luminaire defined by clarity of form and a calm, continuous glow. Evenly diffused light is delivered along the length of the fixture through a refined tubular lens, shaping walls, ceilings, and circulation spaces with softness and restraint. Subtle illuminated joints maintain visual continuity, allowing the light to read as a single, composed element within the architecture. The aluminum housing is complemented by finished side elements offered in architectural finishes developed to align with standard metal tones. These materials bring warmth and cohesion to the fixture, allowing Sabre to integrate naturally with surrounding surfaces while maintaining a quiet, considered presence over time.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +3 more
- voltage: UNV → 120/277V
- spec →
The housing is die cast of copper free and silica free aluminum alloy, specially blended for Prisma, with high resistance to corrosion. This alloy makes the Insert suitable for harsh environments.
- category
- environment
- voltage
- lumens
- CCT
- wattage
- spec →
LED ENGINELED engine available with CREE LEDs in 2700K, 3000K, 3500K, or 4000K in standard 93+ CRI. 2 Step MacAdam ellipse allows for color consistency between fixtures. LED mounted to aluminum heat sink for maximum life output and thermal management. LED engine is accessible from below ceiling.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
The rugged, one-piece die-cast aluminum housing features a complete heat sink hat optimizes heat dissipation through convection cooling management. Low profile, 3G vibration rated compact design minimizes wind load requirements. Housing is completely sealed against moisture and environmental contaminants.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 534 → 61000
- wattage: 12W → 400W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →