MILOSCONCE
A tubular acrylic diffuser paired with a stamped steel back plate in Satin Nickel adds contemporary styling to a value-priced sconce. Finishes: Satin Nickel, Other (Special Order)Sizes: 14inCCT: 27K, 30K, 35K, 40K
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Luminoso LED trims are designed for use with Luminoso 2″ Dedicated housings.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
Juno® 4-inch internally adjustable, 700 lumen LED, IC-rated new construction housings cater to a wide range of application possibilities with just a change out of trims. Offering internal
- category
- environment
- voltage
- lumens
- CRI
- wattage
- +2 more
- cct: 3000K → 2700K
- spec →
B3RWP for Turf is a trimless 3in aperture BeveLED Mini LED round wall wash made for self-centering pre-cut Turf Design Urban or Port acoustical ceiling tiles.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 11W → 24W
- spec →
-2803
- category
- environment
- voltage
- lumens
- CRI
- wattage
- +2 more
- cct: 3000K → 2200K
- spec →
The BOW'S LED features a smooth arched profile with vertically mirrored bows which produce a symmetrical LED wall wash. Perfect for common areas and corridors in commercial offices, hotels and residential spaces. This unit features acrylic top and bottom covers to protect the light source.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- spec →
1” Iolite BWF reflectors can be specified for use with Iolite new construction or remodel housings. Adjustable slot aperture focus the beam spread through 1-1/8” x 1-3/8” opening. Compatible Housings: NHIOICD-16, NHIOICDCP-16, NHRIOIC-16 Color Temperatures: 2700K, 3000K, 3500K, 4000K, 5000K, Comfort Dim (warm dimming) Lumens / Wattage: 600lm / 10W Optics: Spot, Narrow Flood, Flood
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- spec →
Sabre is a surface-mounted, tubular architectural luminaire defined by clarity of form and a calm, continuous glow. Evenly diffused light is delivered along the length of the fixture through a refined tubular lens, shaping walls, ceilings, and circulation spaces with softness and restraint. Subtle illuminated joints maintain visual continuity, allowing the light to read as a single, composed element within the architecture. The aluminum housing is complemented by finished side elements offered in architectural finishes developed to align with standard metal tones. These materials bring warmth and cohesion to the fixture, allowing Sabre to integrate naturally with surrounding surfaces while maintaining a quiet, considered presence over time.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +3 more
- voltage: UNV → 120/277V
- spec →
ADA compliant 3.000" projection x 10.000" height Materials: white frosted acrylic diffusers, brass & steel Output: 8W | 723 - 825 lumens (nominal) CREE LED engine CRI 90+ available in 2700K | 3000K | 3500K 6 standard plated and painted finishes
- category
- environment
- mounting
- voltage
- lumens
- CCT
- +2 more
- spec →
LED ENGINELED engine available with CREE LEDs in 2700K, 3000K, 3500K, or 4000K in standard 93+ CRI. 2 Step MacAdam ellipse allows for color consistency between fixtures. LED mounted to aluminum heat sink for maximum life output and thermal management. LED engine is accessible from below ceiling.
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 11W → 20W
- spec →
The rugged, one-piece die-cast aluminum housing features a complete heat sink hat optimizes heat dissipation through convection cooling management. Low profile, 3G vibration rated compact design minimizes wind load requirements. Housing is completely sealed against moisture and environmental contaminants.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- lumens: 660 → 61000
- wattage: 11W → 400W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →