Cross-Reference
Find the equal.
50,956 products · 253 brands · 31,855 spec sheets — every product cross-referenced to its equals at lookup.
8 products
Filtered by spec — refine in the sidebar, or open one for its cross-references.
indoor/outdoor
The CAT Emergency Dimming Switchpack (ESP-C-010-Z1) is a lighting control device designed to control loads powered via an emergency circuit. Each unit consists of 120-277VAC 20A latching relay used to turn on/off LED and non-LED loads and a continuous 0-10V dimming control used to dim/raise fixtures' light level. The CAT Emergency Dimming Switchpack is used in conjunction with the standard CAT Dimming Switchpack to control the lights within a space. The CAT Emergency Dimming Switchpack is equipped with two RJ 45 connectors to connect the unit to other CAT devices over standard CAT5 cables using WaveLinx CAT protocol. The unit has an elongated chase nipple that allows it to be attached either directly through a 1/2"" knockout into a junction box or inside an adjacent box for meeting specific local code requirements in ceiling plenums.
indoor/outdoor
120/277VAC 20A Relay Switchpack with 0-10V dimming control for emergency fixtures
indoor/outdoor · emergency egress
WaveLinx LITE Emergency Switchpack provides emergency lighting capabilities
indoor/outdoor · emergency egress
WaveLinx PRO Emergency Switchpack provides emergency lighting capabilities
indoor/outdoor · emergency egress
The WaveLinx LITE Emergency Switchpack (ESP-L-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The switchpack consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates into the LITE system by forming a mesh network while communicating with other LITE devices using Bluetooth protocol. Forming a Wireless Emergency allows for other devices to communicate to the ESP, providing power loss detection.
indoor/outdoor
The WaveLinx Networked Relay Panel from Cooper Lighting Solutions consist of Relays and 0-10V dimming modules that is connected to the WaveLinx Area Controller through an Ethernet switch. The WaveLinx Networked Relay Panels are available in various enclosure sizes including emergency options, with capacity up to 64 latching relays and 64 dimming 0-10V channels.
indoor/outdoor · emergency egress
The WaveLinx PRO Emergency Switchpack (ESP-P-010-347) is a lighting control device designed to control (on/off/dim) commercial and industrial lights while providing Emergency capabilities without additional hardware. The ESP consists of a 120-347VAC 20A relay and a continuous 0-10V dimming control. It integrates and communicates with other PRO devices and the WaveLinx Area Controller using the PRO protocol, a 2.4GHz wireless mesh network based on the IEEE 802.15.4 standard. Forming a Wireless Emergency set allows other devices to communicate with the ESP, providing power loss detection.
indoor/outdoor
The WaveLinx Pro Universal Switchpack with 0-10V (WSP-UV-010) control is an integral part of the WaveLinx Wireless Connected Lighting (WCL) system and offers 120-347VAC 20amp zero crossing relay control and continuous 0-10V dimming control of LED and non LED loads. The relay switchpack with 0-10V control also supports 20amp plug load control. The WSP-UV-010 is powered by the 120-347VAC circuit it is controlling and provides simple 1/2” knockout mounting. The relay switchpack with 0-10V control operates on a wireless mesh network based on IEEE 802.15.4 standards.