iWay bollard Super Comfort round
LED direct light outdoor lighting fixture, ground and floor installation, with 180° asymmetric and 360°optics. The complete product consists of the optical assembly and pole to be ordered separately. The optical compartment is composed of various elements: upper cover in painted aluminum; flow recuperator in PMMA; lens in transparent polycarbonate, extruded internal support with radially fixed LED circuit; cone in black painted die-cast aluminum; lower box for housing the die-cast aluminum power supply; water-tight silicone gaskets between the top cover, lens and cone. The optical assembly is installed on the lower post by means of a bayonet fitting and fixed with two special torx screws. The post, available with a circular or square section, is made of extruded aluminum. Three stainless steel rods fixed to the base, give the product a high impact resistance. The post is anchored to the ground by means of the fixing base made of die-cast aluminum alloy with low copper content, resistant to corrosion. The external aluminum parts undergo a multi-step pre-treatment, in which the main phases are degreasing, fluorozirconate passivation (protective surface layer) and sealing (nano-structured silane layer). The next stage of painting is with primer and liquid acrylic paint, baked at 150° C, which provides high resistance to atmospheric agents and UV rays. The lower part of the optical compartment has a nickel-plated brass cable clamp and outgoing rubber cable H07RN-F 4x1mm L = 1700mm. 220 ÷ 240, 50 / 60Hz DALI electronic control gear. To adjust the luminous flux, the power supply can be programmed via a dedicated programming interface or using the cable exiting the optical assembly. The power supply is supplied in On-Off mode and can be transformed into Midnight mode via the same interface. The DALI power supply is compatible with Telemanagement systems. An active control system modifies the intensity of the current so as to maintain the life of the LED unchanged in external environmental thermal conditions. The electrical connection requires IP connectors to be ordered separately. All external screws used are in stainless steel. Dark Sky Approved : the IDA’s Fixture Seal of Approval programme certifies outdoor lighting fixtures as being Dark Sky friendly, so in compliance with the following: Maximum Correlated Color Temperature of 3000K. Up-light allowance limited to 0.5% of total output, or 50 lumens, with no more than10 lumens in the 90-100 degree UL zone. Luminaires are required to have fixed mounting to ensure they are installed as tested; there can be up to + or - 10° adjustment for levelling if needed. Luminaires must have dimming capability to 10% full rating.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
HEAVY-DUTY HOUSING Impact & weather resistance fixture with aluminum housing and polycarbonate lenses. WET LOCATION, IP-65 RATED Engineered and Constructed for Exterior Environments INPUT VOLTAGE 120-277 V Standard input DIMMING 0-10V OPERATING TEMPERATURE: -30°C TO 40°C
- category
- subcategory
- environment
- CCT
- spec →
Introducing our innovative Modern LED bollard – setting new standards in outdoor lighting.
- category
- subcategory
- environment
- mounting
- CCT
- spec →
Dark Sky Compliant pathway lighting: steel housing powder coated finish with clear tempered glass or frosted lens. ADA compliant with a durable extruded white textured polycarbonate or optional Amber Honey, Beige, or Opal Alabaster lens. BAA/BABA Complaint
- category
- subcategory
- environment
- mounting
- CCT
- spec →
The ClearPath Bollard from Invue uniquely brings a simple architectural style to pathway applications that delivers exceptional performance while enhancing the fabric of any setting. The safety glass encapsulates the WaveStream LED optics presenting a beautiful management of glare for improved visibility, while providing high levels of pathway illumination with the simple artistic form.
- category
- subcategory
- environment
- mounting
- CCT
- spec →
The BRT6 LED Bollard from McGraw-Edison brings specification-grade performance into the outdoor pedestrian space, while offering tremendous versatility and value. Rooted in a modest visual form appropriate for a wide range of architectural styles and applications, the BRT6 is capable of high output and wide spacing, while producing zero uplight in any configuration.
- category
- subcategory
- environment
- mounting
- CCT
- spec →
This attractive, heavy-duty bollard features full proof aluminum construction that provides both corrosion and vandal resistance. It is ideal for lighting pedestrian walkways and accenting the exterior grounds of offices, apartment buildings, hotels and parks.
- category
- subcategory
- environment
- mounting
- CCT
- spec →
AB5 Full Cutoff Walkway Bollard
- category
- subcategory
- environment
- mounting
- CCT
- spec →
The rugged construction and maintenance-free performance of the D-Series LED Bollard is ideal for illuminating building entryways, walking paths and pedestrian plazas, as well as any other location
- category
- subcategory
- environment
- mounting
- CCT
Mozart Bollard The Mozart Bollard (MOZB) by Sun Valley Lighting is a traditional styled bollard with a lens-free design featuring excellent brightness and optical control from the PLED™ system. Available in fluted and smooth riser configurations, the Mozart Bollard extends the family of Mozart luminaires to be application specific. Featuring a traditionally styled, durable, corrosion-resistant cast aluminum body, the optical crown, arms, and hub form a unitized housing, sealed with a silicone gasket for weather protection. High-output LEDs are available in multiple color temperatures (3000K, 4000K, and 5000K), with field-replaceable, rotatable optics. The LED drivers offer 0-10V dimming, and the luminaire includes a 20KV surge protector. Finished with a TGIC polyester powder coating, it ensures long-lasting durability and color retention. BABA compliant. UL listed for wet location. Optics are Dark Sky compliant with a U0 BUG rating for specific configurations.
- category
- subcategory
- environment
- mounting
- CCT
- spec →
Circulux Bollard The Circulux Bollard (CLXB) by U.S. Architectural Lighting is the complementary bollard for the CLX and CLX-A families, and combines structural expressiveness with modern functionality. Featuring a durable extruded aluminum shaft and cast aluminum head, it has a distinct architectural design that harmonizes with dynamic outdoor environments. The CLXB stands at a standard height of 42", with optional 30" and 36" configurations. Its clear polycarbonate lens and internal louvers provide glare control and uniform illumination. Available with up to 48 LEDs, the CLXB supports color temperatures of 2700K, 3000K, 4000K, or 5000K and includes a durable TGIC polyester powder coat finish. Ideal for pathways, urban plazas, and cohesive lighting schemes, the CLXB offers style and performance in equal measure. BABA compliant. UL listed for wet location.
- category
- subcategory
- environment
- mounting
- CCT
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps iGuzzini
Full directory →45 rep agencies carry the iGuzzini line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- Alaska Pro-SellSignify (Philips)
Statewide
Arizona AZ1 agency
- Arizona Lighting SalesCurrent
Statewide
Arkansas AR1 agency
Statewide
California CA2 agencies
- Lighting SystemsCurrent
Sacramento · San Francisco
Los Angeles · San Diego
Colorado CO1 agency
Statewide
Connecticut CT1 agency
- Lighting AffiliatesAcuity Brands
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
Statewide
Florida FL4 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
Miami
- Florida Lighting AssociatesCurrent
Fort Myers · Orlando · Tampa
- Lighting SolutionsCooper (Eaton)
Panhandle
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.