Twilight Cortina wall mounted
Pole lighting system aimed at using LED light sources. Optical compartment made of die-cast aluminum. Versions with street optics with OptiSmart Lenses system (CSP optics). Absence of upward dispersion of luminous flux when using the black-colored pole head. High visual comfort. Absence of photobiological hazard. The luminaire falls into the "Exempt Group" category (absence of infrared, blue light and UV radiation hazards) according to EN 62471:2008. DALI version compatible with cable telemanagement systems via NFC technology. Wall-mounted installation achievable by purchasing the X786 arm as an accessory. Cortina sheet metal diffuser must be purchased separately (code X788). Surge protection: 10kV of Common Mode (CM), 6kV of Differential Mode (DM). All external screws used are made of stainless steel. With the use of the BLE - DALI interface, all DALI products can be managed via Bluetooth Low Energy ( more information ). Dark Sky Approved : the IDA’s Fixture Seal of Approval programme certifies outdoor lighting fixtures as being Dark Sky friendly, so in compliance with the following: Maximum Correlated Color Temperature of 3000K. Up-light allowance limited to 0.5% of total output, or 50 lumens, with no more than10 lumens in the 90-100 degree UL zone. Luminaires are required to have fixed mounting to ensure they are installed as tested; there can be up to + or - 10° adjustment for levelling if needed. Luminaires must have dimming capability to 10% full rating.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Galleon II Floodlight delivers high-performance optical control in a scalable platform, utilizing 10 NEMA type flood optics and a host of mounting options to solve even the most difficult design challenges. Pristine color rendering and color-over-angle performance set the standard for lighting quality, providing stunning results on every project.
- category
- subcategory
- environment
- CCT
- spec delta
- beam_angle: 100° → 40°
- spec →
The USSL Discrete area and site luminaire combines optical uniformity, energy efficiency and long-term reliability in an advanced, patent pending modern design. Now utilizing a direct-mounted discrete light engine, the USSL Discrete luminaire delivers unparalleled uniformity and improved visual comfort. A versatile quick mount standard arm facilitates ease of installation for both retrofit and new installations. The USSL Discrete fixture replaces 70-1,000W metal halide fixtures in general area lighting applications such as parking lots, walkways, roadways and building areas.
- category
- subcategory
- environment
- CCT
- spec →
Industry-first outdoor lighting system with built-in 0-10V technology. It features adjustable mounting brackets with a max run of 113’ and IP67 rating.
- category
- subcategory
- environment
- CCT
- spec delta
- beam_angle: 100° → 10°
- spec →
The TANELLA Luminaire System brings striking theatrical elegance to outdoor environments, supporting up to four luminaires with individually adjustable vertical and horizontal aiming. Each luminaire offers 2700K, 3000K, 3500K, or 4000K color temperatures and Super Spot, Spot, Medium, or Wide beam optics. A cylindrical lens within the slotted housing features an optional backlight in red, green, blue, or static white and casts a subtle glow to accentuate the luminaire at night. External louvers, available in anodized aluminum or Satin Ice for a glowing effect, enhance the fixture’s architectural presence, while the versatile pole accommodates alternative attachments such as speakers, gobos, or banner arms. The wishbone pole structure delivers both strength and style, with all steel hot-dip galvanized before receiving a finely textured paint finish. Each pole ships prewired with fishtape for simplified installation, and all hardware is stainless steel.
- category
- subcategory
- environment
- CCT
- beam angle
- spec →
Low-profile LED Bravo FROST Tunable White fixtures provide excellent and even illumination on all surfaces. At only 10 watts per foot, Bravo FROST TW produces an incredible 850 lumens per foot at a crisp sharp 90+ CRI. Each Bravo Frost TW contains it own driver allowing a 120V feed and longer single runs than low voltage systems. Each luminaire includes 90° adjustable brackets and integral CCT switch to change the color tempearture (3000K / 3500K / 4000K). Input Voltage: 120V Length: 12" Lumens / Wattage: 850lm / 10W per foot Color Temperature: Field Selectable (3000K / 3500K / 4000K) Finish: White Included with luminaire: (2) 90° Adjustable mounting brackets and (1) End-to-End connector Accessories: NUA-902W: Hardwire Junction Box NUA-904W: 72" Hardwire Connector NUA-905W: 72" Cord and Plug NUA-903W: End-to-End Connector (included with luminaire) NUA-906W: 6" Jumper Cable NUA-912W: 12" Jumper Cable NUA-924W: 24" Jumper Cable NUA-972W: 72" Jumper Cable NUA-909W: 90° Adjustable Mounting Brackets (included with luminaire)
- category
- subcategory
- environment
- CCT
- beam angle
- spec →
Gardco PureForm LED area P26 features a sleek, low profile design and optimal performance. PureForm area medium is designed to achieve maximum pole spacing, with lumen output up to 62,000 lumens. Multiple distribution and shielding options are available to achieve maximum control. A full range of control options provides additional energy savings
- category
- subcategory
- environment
- CCT
- spec →
Not all roadway applications are created equal. Poles that are mounted farther away from a roadway, multi-lane highways, toll plazas, and additional applications require special needs. Typical optics and mounting configurations will not meet these special requirements. The Lumec RoadView LED off road luminaire provides a solution to these unique applications. Combined with state-of-the-art optically efficient luminaires, the knuckle adapter can tackle even the most difficult installation. This flexible adapter can be mounted vertically or horizontally, based on existing or new pole configuration, for optimal performance.
- category
- subcategory
- environment
- CCT
- spec →
The fixture emits symmetrical light directed downwards. The angle of the internal diffuser, together with the slightly curved top shade, ensures a wide band of glare-free, uniform lighting. The LED-upgrade kit (also referred to as LED Retrofit kit) allows you to replace the old electrical components with a complete modern new LED unit, while retaining the original fixture. Alfred Homann designed the Kipp Post in 1997 for urban environments where both functional and pleasant lighting comfort was desired. It is designed to withstand harsh weather conditions and vandalism year after year. Therefore, it was obvious that Kipp was one of the first Louis Poulsen fixtures that needed to be fitted for future LED technology. The LED-upgrade kit for Kipp contains all the required parts to make Kipp even more future-proof that it already is.
- category
- subcategory
- environment
- CCT
- spec delta
- beam_angle: 100° → 40°
The Xega 60″ three-blade fan comes equipped with Smart by Bond technology, allowing you to control the settings from any smart device. A trio of dramatically rounded blades curl around a cylindrical motor, creating an artistic approach to providing comfort for your guests. Relax under a black or aged brass Xega ceiling fan while enjoying the elevated design.
- category
- subcategory
- environment
- CCT
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps iGuzzini
Full directory →45 rep agencies carry the iGuzzini line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- Alaska Pro-SellSignify (Philips)
Statewide
Arizona AZ1 agency
- Arizona Lighting SalesCurrent
Statewide
Arkansas AR1 agency
Statewide
California CA2 agencies
- Lighting SystemsCurrent
Sacramento · San Francisco
Los Angeles · San Diego
Colorado CO1 agency
Statewide
Connecticut CT1 agency
- Lighting AffiliatesAcuity Brands
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
Statewide
Florida FL4 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
Miami
- Florida Lighting AssociatesCurrent
Fort Myers · Orlando · Tampa
- Lighting SolutionsCooper (Eaton)
Panhandle
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.