iGuzziniSite Lighting

Twilight Bilbao pole-top

Pole and applique street lighting system for use with LED light sources. Optical compartment in die-cast aluminium; PMMA protection diffuser, 3 mm thickness (IK10); Versions with street optics and the Optismart Lenses system, versions with symmetrical/elliptical optics comprising upper reflector in super-pure anodised aluminium, methacrylate lens and lower refl ector in metallic PMMA. No upwards dispersion of the luminous flux for the Bilbao version. High visual comfort. No photo-biological risks. This luminaire is in the “Exempt Group” (no risk linked to infrared, blue light and UV radiation) in accordance with EN 62471:2008. DALI versions compatible with remote management systems and Midnight versions. Installation on poles with ø 60 or ø 76 mm terminal. All external screws used are in stainless steel. Product equipped with Nema 7-PIN Dali Fitting complete with protective cap. In the case of installations on insulated supports (e.g. fibreglass poles), please contact us to request a customised product equipped with an accessory that protects the device from possible failure due to electrostatic charges. Dark Sky Approved : the IDA’s Fixture Seal of Approval programme certifies outdoor lighting fixtures as being Dark Sky friendly, so in compliance with the following: Maximum Correlated Color Temperature of 3000K. Up-light allowance limited to 0.5% of total output, or 50 lumens, with no more than10 lumens in the 90-100 degree UL zone. Luminaires are required to have fixed mounting to ensure they are installed as tested; there can be up to + or - 10° adjustment for levelling if needed. Luminaires must have dimming capability to 10% full rating.

compliance: IP-ratedcct: 3000Ksubcategory: polefamily: Twilight Bilbao pole-topbeam angle: 100°lumens: 3560cri: 80wattage: 30.5dimming: DALI

Cross-References

Top equivalents — 12 across 12 brands

Compare top 3
  • Louis Poulsen91686exact

    The fixture emits symmetrical light directed downwards. The angle of the internal diffuser, together with the slightly curved top shade, ensures a wide band of glare-free, uniform lighting. The LED-upgrade kit (also referred to as LED Retrofit kit) allows you to replace the old electrical components with a complete modern new LED unit, while retaining the original fixture. Alfred Homann designed the Kipp Post in 1997 for urban environments where both functional and pleasant lighting comfort was desired. It is designed to withstand harsh weather conditions and vandalism year after year. Therefore, it was obvious that Kipp was one of the first Louis Poulsen fixtures that needed to be fitted for future LED technology. The LED-upgrade kit for Kipp contains all the required parts to make Kipp even more future-proof that it already is.

    • category
    • subcategory
    • environment
    • lumens
    • CCT
    • CRI
    • +2 more
    • beam_angle: 100°40°
    spec →
  • WE-EF LightingLTM440 LEDexact

    IP66. Class I. IK09. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Silicone CCG® Controlled Compression Gasket. Polycarbonate outer lens. Service door with fused cable connecting box. CAD-optimized optics for superior illumination and glare control. 0-10V Dimming comes standard with luminaire. Specify product with 7 Digit product code – Finish Color. Accessories, such as mounting, optical, and electrical, must be specified separately. Example: XXX-XXXX-9004 (Black) + XXX-XXXX (Accessory 1)

    • category
    • subcategory
    • environment
    • lumens
    • CCT
    • wattage
    spec →
  • Lightway IndustriesTRZPstrong

    Heavy gauge handspun aluminum reflector attached to a die cast aluminum yolk available in your choice of finishes. Mounts to a standard 3” round pole or optional wall mount bracket. UL Listed for wet applications, Dark Sky compliant. ADA compliant with a durable extruded white textured polycarbonate or optional Amber Honey, Beige, or Opal Alabaster lens. BAA/BABA Complaint

    • category
    • subcategory
    • environment
    • mounting
    • CCT
    • CRI
    spec →
  • Fail-SafeFSRstrong

    The Fail-Safe FSR LED fixture combines maximum security construction features with LED technology. This recessed luminaire utilizes a one-piece overlapping door frame, security lensing, and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. It is UL/cUL listed for wet locations and suitable for use in inmate cells, psychiatric wards, secure corridors, and general population areas.

    • category
    • subcategory
    • environment
    • CCT
    • CRI
    • spec delta
    • lumens: 3560956
    • wattage: 30.5W14W
    spec →
  • LumarkPRVWM-BZstrong

    With the latest LEDs, the Prevail commercial parking lot light delivers unparalleled uniformity.

    • category
    • subcategory
    • environment
    • CCT
    • spec delta
    • lumens: 356084000
    • wattage: 30.5W588W
    spec →
  • McGraw-EdisonGFLDstrong

    The Galleon II Floodlight delivers high-performance optical control in a scalable platform, utilizing 10 NEMA type flood optics and a host of mounting options to solve even the most difficult design challenges. Pristine color rendering and color-over-angle performance set the standard for lighting quality, providing stunning results on every project.

    • category
    • subcategory
    • environment
    • CCT
    • spec delta
    • wattage: 30.5W368W
    • beam_angle: 100°40°
    spec →
  • PortfolioHLW6strong

    6 inch aperture lensed wall wash for use with PAR30L or PAR38 lamps. The precisely formed specular internal reflector and glass spread lens direct a broad spread of illumination on vertical surfaces. The spread lens provides a smoother wash of light than can be obtained by PAR adjustables.

    • category
    • subcategory
    • environment
    • wattage
    • beam angle
    spec →
  • StreetworksUSSL-PAstrong

    The USSL Discrete area and site luminaire combines optical uniformity, energy efficiency and long-term reliability in an advanced, patent pending modern design. Now utilizing a direct-mounted discrete light engine, the USSL Discrete luminaire delivers unparalleled uniformity and improved visual comfort. A versatile quick mount standard arm facilitates ease of installation for both retrofit and new installations. The USSL Discrete fixture replaces 70-1,000W metal halide fixtures in general area lighting applications such as parking lots, walkways, roadways and building areas.

    • category
    • subcategory
    • environment
    • CCT
    • spec delta
    • wattage: 30.5W550W
    spec →
  • BEGA135016strong

    Floodlights are the ideal fixture for lighting situations where the main focus is to accent or highlight. This luminaire type is available in a wide range of light outputs and beam options, including several in LED. A versatile mounting system allows them to be installed on poles, facades, roofs, or

    • category
    • subcategory
    • environment
    • lumens
    • CRI
    • spec delta
    • cct: 3000K4000K
    • wattage: 30.5W109W
    • beam_angle: 100°45°
    spec →
  • H.E. WilliamsPX-SLOTstrong

    With slim styling, a sleek and linear design, and a continuous flow of light, you can achieve lumen outputs up to 1300 lumens per foot in both grid and drywall ceilings for optimal lighting situations with the PX SLOT.

    • category
    • subcategory
    • environment
    • mounting
    • lumens
    • CRI
    • +1 more
    • cct: 3000K2700K
    spec →
  • LithoniaWTstrong

    WT5, WT8 This product webpage has been discontinued, please contact your local sales representative.

    • category
    • subcategory
    • environment
    • lumens
    • wattage
    spec →
  • Sun Valley LightingMRBstrong

    Marbella The Marbella™ from Sun Valley Lighting takes the traditional elegance of a lantern and crafts the jewelry that will accentuate your architectural creation day or night. The Marbella™ expands on the simple beauty of an arch to carry your theme into every nuance of your architecture. Do not mistake the Marbella™ for just another beautiful piece of artwork, the Marbella™ also is a technological marvel utilizing the PLED optical system from Sun Valley as the powerful engine of effective photometric performance. The Marbella Lantern™ is available in 3 different sizes: 21, 18 and 12, with 3 different lensing options: no lens, clear patterned acrylic lens or white acrylic lens. It can be mounted as either a tenon mount or pendant mount, on either a pole or a wall mount. There are 4 different styles of decorative arms for the larger 21 and 18 units as well as 4 different options for the smaller 12. BABA compliant. UL listed for wet location. Optics are Dark Sky compliant with a U0 BUG rating for specific configurations.

    • category
    • subcategory
    • environment
    • mounting
    • lumens
    • spec delta
    • cct: 3000K4000K
    • wattage: 30.5W2.5W

Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →

Local Reps

Who reps iGuzzini

Full directory →

45 rep agencies carry the iGuzzini line across 51 states. Pick your state.

+41 more states in the full directory →

Line cards are directional — confirm coverage with the agency before routing a spec.