Light Up Orbit - body in stainless steel flush mounted
Floor/ground-mounted recessed luminaire intended for use with LED light sources. Comprises body and frame casing. Body and frame flush with floor in AISI 304 stainless steel installed without visible screws, hardened safety glass; A2 stainless steel cable gland complete with output power supply cable type.2x1mm². The cable is provided with IP68 anti-transpiration device. Casing in polypropylene plastic complete with AISI 304 stainless steel ring, to be ordered separately. Optics with plastic lenses or reflectors. Safe. low voltage power supply at constant current (350/500/700mA depending on the type of specific recessed luminaires) to be ordered separately. Static load resistance 2000 Kg using frame casing to be ordered separately. Roll-over product in accordance with EN 60598-2-13 (torsion strength and shear load tests). The luminaires cannot be used in lanes where they are subjected to horizontal stresses caused by acceleration, braking and/or changes of direction. Compact dimensions of the luminaire (<100mm) IP68 protection for product and cable alike using IP68 connectors. The product is not considered suitable for installation in swimming pools and fountains.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The PFX-5310 is a versatile 4-foot architectural linear fixture designed for direct and indirect lighting. It features field-selectable color temperatures ranging from 2700K to 5000K and four adjustable lumen output settings, reaching up to 5,078 nominal lumens. Built for durability, the unit includes a premium powder-coat housing and a long-life LED system rated for up to 175,000 hours. It offers flexible mounting options, including suspension, surface, wall, and recessed kits, making it suitable for diverse architectural environments. The fixture also supports toolless linking of up to 10 units at 120V for streamlined installation. Additionally, it is cULus listed for damp locations and features 2.5kV surge protection for enhanced electrical reliability.
- category
- subcategory
- environment
- CCT
- CRI
- spec →
The WCSDB Commercial downlight is equipped with a convenient selectable color temperature and wattage dip switch, making it versatile for a wide range of applications.
- category
- subcategory
- environment
- CCT
- CRI
- spec delta
- wattage: 480W → 38W
- spec →
6 inch LED recessed downlight designed for vandal resistant or sealed / medical applications. Lumen packages from 1000 - 7000 lumens with color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, and 5000K. Available with dim-to-warm technology. Choose from an open reflector, or an enclosed version with a bottom lens or a bottom trim ring with lens. Available with lens thicknesses up to 0.375", with standard or tamper-resistant stainless steel countersunk screws.
- category
- subcategory
- environment
- CCT
- CRI
- spec →
The H457ICAT1E is an insulated ceiling, AIR-TITE™ housing offering 120 volt dimming capability with many incandescent or electronic low voltage dimmers. Designed for use with EL4 series LED Gen2 Light Engines and TL4 LED Series Trims, the H457ICAT1E offers high quality downlighting along with high efficacy – the result being great lighting and significant energy savings.
- category
- subcategory
- environment
- CCT
- lens
- spec delta
- wattage: 480W → 13W
- spec →
Recessed HC8R 8-10 inch and HC812R 12 inch nominal aperture retrofit LED downlights for installation in existing open frame commercial downlights. HC8R retrofit collar kit fits housing openings 8.73" to 10.3” diameter (includes 11.3” oversize matte white trim ring). And the HC812R retrofit collar kit fits housings of 12” diameter (includes 15.375” oversize matte white trim ring). HC8R/HC812R features an integral lens with damp and wet location listing in protected ceilings. Specify retrofit collar kit, LED module, and reflector separately to complete the luminaire.
- category
- subcategory
- environment
- CCT
- CRI
- spec →
A 4-inch square aperture specification grade shallow lens downlight reflector for LED modules. Use for task or general area illumination where wider distribution and higher angle light is desired. Wet location listed and suitable for use above food preparation areas.
- category
- subcategory
- environment
- CCT
- lens
- spec delta
- wattage: 480W → 33W
- spec →
The Boca 631 is a tiny dual-lens in-ground fixture, 3 inches in diameter, for use with a low-voltage MR16 lamp. The non-adjustable beam provides a crisp, white halogen light source for grazing or uplighting in constricted areas. The dual lens design greatly reduces the top glass temperature and allows for installation in pedestrian areas. Designed for recess mounting in concrete, brick, stone or dirt, it is suitable for drive-over applications.
- category
- subcategory
- environment
- CCT
- lens
- spec delta
- wattage: 480W → 50W
- spec →
The Define series by NeoRay is the ultimate in minimalist simplicity, providing clean, uniform lines of illumination in virtually any architectural environment. Besides delivering outstanding efficacy, it offers unmatched design flexibility with a variety of profile widths and mounting options available.
- category
- subcategory
- environment
- CCT
- CRI
- spec →
The specification-grade, small aperture product family combines energy efficiency with superior cutoff, optical performance and control for architectural applications. A standard 0-10V driver dims to 1% and a multitude of optional drivers are available.
- category
- subcategory
- environment
- CCT
- CRI
- spec →
A wide breadth of options and features place the MRZ family in a class of its own—at an economical vantage point. Available in 1, 2, 3 or 4-head, it is is used in retail, commercial, and hospitality applications to intensify and illuminate spaces with high performance and quality. With multiple lumen packages, rotating heads, and a range of control options, MRZ is perfect for accent, wall wash, or ambient lighting.
- category
- subcategory
- environment
- CCT
- CRI
- spec delta
- wattage: 480W → 16W
- spec →
Discontinued product - eW Downlight Powercore gen2
- category
- subcategory
- environment
- CCT
- CRI
- spec delta
- wattage: 480W → 15W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps iGuzzini
Full directory →45 rep agencies carry the iGuzzini line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- Alaska Pro-SellSignify (Philips)
Statewide
Arizona AZ1 agency
- Arizona Lighting SalesCurrent
Statewide
Arkansas AR1 agency
Statewide
California CA2 agencies
- Lighting SystemsCurrent
Sacramento · San Francisco
Los Angeles · San Diego
Colorado CO1 agency
Statewide
Connecticut CT1 agency
- Lighting AffiliatesAcuity Brands
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
Statewide
Florida FL4 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
Miami
- Florida Lighting AssociatesCurrent
Fort Myers · Orlando · Tampa
- Lighting SolutionsCooper (Eaton)
Panhandle
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.