Billboard pole-top 450x209 mm
Pole-mounted urban lighting system for the use of LED light sources. Installation on pole-head, side-arm or whip-arm poles. Optical compartment made of die-cast aluminium alloy with steel springs and 4mm thick tempered glass. No upward scattering. Adjustable optical compartment (tilt angle ±15°). Three optics available: STM, STW and ASF. The product is available with Midnight protocol or with Zhaga Socket 4 Pin (up only). Supplied with an outgoing cable L=500mm. Overvoltage protection 10kV (common mode) and 10kV (differential mode). The connection for pole installation is separate and can be purchased as an accessory separately. - Supplied with decompression valve. The product is equipped with a hinge that allows opening without tools. IP66, IK10. Class II. In the case of installations on insulated supports (e.g. fibreglass poles), please contact us to request a customised product equipped with an accessory that protects the device from possible failure due to electrostatic charges. Dark Sky Approved : the IDA’s Fixture Seal of Approval programme certifies outdoor lighting fixtures as being Dark Sky friendly, so in compliance with the following: Maximum Correlated Color Temperature of 3000K. Up-light allowance limited to 0.5% of total output, or 50 lumens, with no more than10 lumens in the 90-100 degree UL zone. Luminaires are required to have fixed mounting to ensure they are installed as tested; there can be up to + or - 10° adjustment for levelling if needed. Luminaires must have dimming capability to 10% full rating.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The DC545 is a 9” Square Floodlight Luminaire with a Die Cast Aluminum Body and Impact Resistant Glass Lens. Engineered and Constructed for Exterior Environments. The DC545 comes standard with an Integral 1/2” Male Threaded Mount with an Optional Post Top Fitter available
- category
- subcategory
- environment
- mounting
- CCT
- spec →
Mission style post-top emphasizes simple horizontal and vertical lines and flat panels as being the key architectural design elements. ADA compliant with a durable extruded white textured polycarbonate or optional Amber Honey, Beige, or Opal Alabaster lens. BAA/BABA Complaint
- category
- subcategory
- environment
- mounting
- CCT
- spec →
HALO Outdoor LED Floodlight, Bronze, Selectable CCT 3000/4000/5000K, 2000-20000 Lumens, D2D, 120-277
- category
- subcategory
- environment
- mounting
- CCT
- spec →
The simple geometric form of Mesa allows it to adapt to either contemporary or traditional architectural settings. Available in single or twin pole mount configurations with optional wall mounting capability, Mesa mounting options allow for harmonized site design whether at the entryway or in the parking lot. UL and cUL listed for use in wet locations.
- category
- subcategory
- environment
- mounting
- CCT
- spec →
The Celesteon LED high mast luminaire combines high output and efficiency with easy install and affordability. Designed for new and retrofit high-lumen applications, the Celesteon LED high mast is ideal for highways, interchanges, ports, rail yards, container yards, parking lots, correctional facilities, security lighting, treatment plants and other facilities in need of high lumen packages with accurate optical control.
- category
- subcategory
- environment
- mounting
- CCT
- spec delta
- beam_angle: 100° → 40°
- spec →
The Galleon™ LED Adjustable luminaire combines a low-profile design with the mounting angle flexibility of a pole-mounted floodlight to illuminate large areas. With a maximum tilt angle of 60° from horizontal, and patented, high-efficiency AccuLED Optics™ technology, the Galleon Adjustable provides uniform and energy conscious illumination for parking lots, container/rail yards, or any large area application. Fixture mounts direct to pole or to a bullhorn or 2-3/8" – 3" O.D. pole-top tenon. IP66 rated and UL/cUL Listed for wet locations.
- category
- subcategory
- environment
- mounting
- CCT
- spec →
These high-performance area lights feature a durable and aerodynamic housing design that is made of 100% pure aluminum. External airflow fins and a separate driver compartment help to reduce operating temperatures and extend fixture life.
- category
- subcategory
- environment
- mounting
- CCT
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps iGuzzini
Full directory →45 rep agencies carry the iGuzzini line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- Alaska Pro-SellSignify (Philips)
Statewide
Arizona AZ1 agency
- Arizona Lighting SalesCurrent
Statewide
Arkansas AR1 agency
Statewide
California CA2 agencies
- Lighting SystemsCurrent
Sacramento · San Francisco
Los Angeles · San Diego
Colorado CO1 agency
Statewide
Connecticut CT1 agency
- Lighting AffiliatesAcuity Brands
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
Statewide
Florida FL4 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
Miami
- Florida Lighting AssociatesCurrent
Fort Myers · Orlando · Tampa
- Lighting SolutionsCooper (Eaton)
Panhandle
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.