iGLO LED Corn Street Light Series 27W
iGLO LED Corn Street Light Series 27W
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
A series of LED Area/Roadway luminaires with asymmetrical or asymmetrical wide spread light distribution. Designed specifically to illuminate streets, squares, access roads, and pedestrian zones while providing maximum glare control.
- category
- subcategory
- environment
- voltage
- lumens
- beam angle
- +1 more
- voltage: 277V → UNV
- cct: 5700K → 4000K
- wattage: 100W → 29W
Marbella Wall Mount The transitional styled lantern wall mount MRB-WM Series by Sun Valley Lighting features a heavy-duty cast aluminum housing with decorative accents. Utilizing LED technology, this wall-mounted luminaire provides efficient illumination for traditional streetscapes and building exteriors. It offers a range of distribution patterns to suit various lighting needs. BABA compliant. UL listed for wet location. Optics are Dark Sky compliant with a U0 BUG rating for specific configurations.
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +2 more
- voltage: 277V → UNV
- cct: 5700K → 4000K
Linear EXT Wall Mount Decorative wall mount luminaire with performance area lighting optics. Available in 3 sizes, the Linear EXT Wall Mount is a contemporary styled fixture with lens free design features excellent fixture brightness control for the optical system. The Linear EXT LED Wall Mount extends the family of Linear EXT LED luminaires to be application specific. Heavy gauge cast aluminum. Stainless steel hardware. Polyester powdercoat finish. BABA compliant. UL listed for wet location. Optics are Dark Sky compliant with a U0 BUG rating for specific configurations.
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +2 more
- voltage: 277V → UNV
- cct: 5700K → 4000K
- spec →
Gardco OptiForm site and area luminaires are available in three sizes to provide an efficient site lighting luminaire from the pathway to a large parking lot. Featuring the latest in LED technology, OptiForm achieves up to 190 lumens per watt. Eleven optical distributions are available, suitable for a range of outdoor lighting applications. OptiForm features a lightweight design that is easy to install. Service Tag provides ease of maintenance throughout the life of the luminaire.
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +2 more
- voltage: 277V → UNV
- cct: 5700K → 2700K
- spec →
The Lumec MiniView LED Roadway luminaire was designed to eliminate the compromises of performance, features and value when choosing between existing HID and industry leading LED technology. MiniView is the perfect solution when projects require a luminaire that meets specifications without sacrificing performance... all while maximizing operations and maintenance savings. This roadway luminaire features a single IP66-rated LED module, designed to provide crisp, brilliant white light that surpasses existing HID luminaire performance. Optimized for applications such as local roads and residential streets, MiniView will become the choice of any city, municipality and utility considering the overall size, weight, and tool-free features that ensure ease of installation. MiniView makes your upgrade to reliable, long-lasting, low-maintenance LED lighting a simple cost-effective decision.
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +1 more
- voltage: 277V → UNV
- cct: 5700K → 3000K
- spec →
The versatile and reliable Umbra series features robust, corrosion-resistant die-cast aluminum housing and an IK08-rated tempered glass lens, ensuring suitability for diverse environments and climates. It offers Type II, III, IV, or V light distributions through high-performance optical lenses. Designed with flexible mounting options, Umbra delivers versatile exterior and interior lighting solutions.
- category
- subcategory
- environment
- voltage
- wattage
- beam angle
- +1 more
- voltage: 277V → 120-347V
- lumens: 3300 → 11233
- cct: 5700K → 2700K
- spec →
Griff XL is designed for the lighting of highways and major roads. This fixture is equipped with an integrated heat sink and thermal pad for self-thermal control, and artistically designed with a sleek figure to blend in with its surroundings.
- category
- subcategory
- environment
- voltage
- lumens
- CCT
- +1 more
- voltage: 277V → 120-277V
- wattage: 100W → 265W
- spec →
The RSQ5 is an integrated LED module / trim with a square shallow lens suitable for new construction, remodel and retrofit installation. Certified for use with Halo and compatible 5” housings and can be used with housings in direct contact with insulation. Integral gasket provides airtight compliance in non-airtight housings, provides code compliance and additional energy savings. Use for general area lighting in low to medium height ceilings where energy savings and long life are desired.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- cct: 5700K → 2700/3000/3500/4000/5000K
- spec →
The Metroline LED luminaire combines form with function to create a dayform appearance that complements the urban landscape. High efficiency LED optics, enable visibility tuned to street or pathway environments.
- category
- subcategory
- environment
- voltage
- spec delta
- cct: 5700K → 3000/4000K
- wattage: 100W → 250W
- spec →
The Night Falcon™ LED floodlight luminaire combines high-efficiency optics, superior thermal management and energy efficiency in a cost effective solution. The compact, robust design incorporates a separate driver compartment for maximum heat dissipation resulting in longer fixture and LED life. The Night Falcon luminaire uses precision engineered optics delivering superior uniformity and excellent illumination to the targeted application. Typical applications include area lighting for security, building facade lighting, accent and signage lighting in both commercial and industrial applications. The Night Falcon luminaire is UL/cUL listed for wet locations and is IP66 and 3G vibration rated.
- category
- subcategory
- environment
- voltage
- beam angle
- spec delta
- voltage: 277V → 277V/347V/480V
- lumens: 3300 → 27528
- cct: 5700K → 4000K
- wattage: 100W → 450W
- spec →
The McGraw-Edison Talon is the most versatile, functionally designed, universally adaptable outdoor luminaries available. The Talon brings outstanding performance to walkways, parking lots, roadways, building areas and any security lighting application. U.L. listed and CSA certified for wet locations. IP66 Rated.
- category
- subcategory
- environment
- voltage
- CRI
- spec delta
- voltage: 277V → UNV
- cct: 5700K → 4000K
- beam_angle: 90° → 30°
- spec →
The IAF/ICF Series is an energy efficient family of light duty industrials that feature premium performance and durability. The series incorporates sturdy embossed reflectors that precisely direct and effectively control light. The IAF Series can be installed using various mounting methods and numerous options and accessories are available. The series is available with both Apertured (IAF) and Closed Top (ICF) reflector combinations. The IAF Series can be utilized in simple task and area lighting and industrial applications. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → UNV
- lumens: 3300 → 8000
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →