PRO Outdoor Lighting Control Module (WOLC-7P-10A)
The WaveLinx PRO Outdoor Lighting Control (WOLC) Module extends the WaveLinx System’s controls capability to a building’s surroundings or site such as parking lots and short pathways. The WOLC Module is individually addressable and installs on top of a light pole via an ANSI 136.41-compliant, 7-pin twist-lock connector. It can switch luminaires ON/OFF via an integrated high current relay and dim luminaires equipped with 0-10V dimming drivers or ballasts. It communicates with the WaveLinx Wireless Area Controller over an IEEE 802.15.4 network.
Cross-References
Top equivalents — 12 across 11 brands
Compare top 3 →- spec →
Decorative Aluminum Pole Mount Motion Sensor Arm
- category
- environment
- voltage
- spec delta
- wattage: 1W → 6W
- spec →
The nPS 80 DALI controller is DALI-2 Certified, providing the ability for nLight to interface with DALI. Multiple configuration options support a variety of applications, including support for static
- category
- environment
- voltage
- dimming
- spec →
Power Pack 347V - MP347A Lighting
- category
- environment
- voltage
- spec →
The GLS Series luminaire by Sun Valley Lighting features a traditional crowned prismatic borosilicate glass refracting lens with a corrosion-resistant cast aluminum base and decorative rungs. The luminaire base fitter has a 3” I.D. opening for tenon mounting, and comes in 2 design options. The LED Power Array offers symmetric radial distribution, with Type-III or Type-V distributions controlled by the refracting globe. High-power LEDs are available in Warm White (2700K, 3000K), Neutral White (4000K), and Cool White (5000K), with L93 lumen maintenance at 100,000 hours. The luminaire includes a 0-10V dimmable driver with surge protection and optional True Amber LEDs for wildlife-friendly lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 347V → 347480
- wattage: 1W → 72W
- spec →
Replacement face plate and test switch for remote emergency LED drivers Compatible Emergency Drivers: NEPK-20LEDUNV: 20W Emergency LED Driver NEPK-23LEDUNV: 23W Emergency LED Driver
- category
- environment
- voltage
- dimming
- spec delta
- wattage: 1W → 20W
- spec →
The IOTA ILBHI CP20 HE SD HV is a UL Listed emergency LED driver for field and factory installation that allows a 347-480VAC fixture with 55-200VDC Non-Class 2 LED lighting loads to be used for both
- category
- environment
- voltage
- spec delta
- voltage: 347V → 347V/480V
- wattage: 1W → 20W
Features Rugged A383 Cast Aluminum housing Available in 45W-150W power packages 140lm/w efficacy High Power LUMILED™ LED Engines Optional 3500K-6500K CCT Available with 120-277VAC or 347-480VAC […]
- category
- environment
- voltage
- spec delta
- voltage: 347V → 120V/277V/347V/480V
- wattage: 1W → 45W
The OSQW™ wall mount luminaire features NanoComfort® Technology which provides superior glare reduction and visual comfort with high-efficiency illumination delivered precisely where it is needed. Designed for easy installation with through-wired or conduit entry from the top, bottom, sides and rear. Plus, emergency battery back-up option is available.
- category
- environment
- voltage
- spec delta
- voltage: 347V → 120V/277V/347V/480V
- wattage: 1W → 7W
- spec →
2R seriesrelays are designed to be the longest lasting, most reliable relays available. By incorporating a unique single moving contact, both endurance and reliability are significantly enhanced. These relays have been tested to handle 200,000 full load cycles and 1,000,000 no load cycles. They have two high quality nickel-silver contactsthat can handle today’s high-inrush loads. Relays are available with or without status contacts and are available with variousinterface connectors.
- category
- environment
- voltage
- spec delta
- voltage: 347V → 120/277/347VAC
- spec →
The HTG-1 Surface combines sleek design with advanced performance, featuring Microstructure EdgeTech Optics™ for precise light control, seamless illumination, and superior uniformity. With a minimalist 1.5" aperture and ultra-low profile, it offers flexible optic options including Batwing, Glare Control, Diffused (Lambertian), Wall Wash, and Room Fill. Available in individual lengths or seamless runs up to 250 feet with no lens breaks or hotspots. Installation is quick and easy with the innovative toolless “Push to Eject” system, and the design features no visible fasteners for a clean aesthetic. Choose from integral or remote drivers, custom powder coat finishes, and SLO outputs up to 1480 lm/ft with 90+ CRI standard. Tunable White available. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 347V → 120-277V, 347V
- wattage: 1W → 10W
- spec →
Constant Power Emergency LED Driver Provides voltage to the Input side of the connected load during emergency mode operation.For use with switched or unswitched fixtures.Can be used with LED lamp/luminaire loads providing up to 25W and 40W of constant power in Emergency mode. Optional remote available for manual testing.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 347V → 120-347V
- wattage: 1W → 350W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps WaveLinx
Full directory →43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
- Malmstrom White Co.Cooper (Eaton)
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco · Ventura
Los Angeles · San Diego
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
- Lighting DynamicsCooper (Eaton)
Fort Myers · Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.