24VPLUGIN
Class 2 Power Supply
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The DLS 27V 15A Power Converter/Battery Charger from IOTA converts nominal 108-132 AC voltage to 27.2 DC voltage for both DC load operation and 24V battery charging. As a power supply , the unit's
- category
- subcategory
- environment
- voltage
- spec →
This product reached it's end of life on June 1, 2024 The APS-240-24 is a 240W / 10A, 24VDC, DIN rail mount power supply. They are cULus approved, feature a convection-cooled design, and are designed to work with all 24VDC fixtures from Acclaim.
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 20W → 240W
- spec →
A interior Class 2 LED power supply providing a constant voltage output of 24VDC. Features Pulse Width Modulation (PWM) for smooth and flicker-free dimming.
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 20W → 96W
In the same size and look as Expert Control and Expert Repeat, this DIN rail mount PoE network switch only requires a 24V DC power supply
- category
- subcategory
- environment
- voltage
- spec →
The Fail-Safe Changing Views is a new series of visual therapy luminaires by Eaton. Designed to bring warmth, ambience and positive energy into a variety of environments, these luminaires help create a calming influence throughout any facility. The CV Series is designed with an extremely thin profile, less than 1" deep, and it is ADA compliant. Choose from a variety of images in the picture gallery to create wall murals.
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → UNV
- wattage: 20W → 100W
H277 transformer steps 277V line voltage down to 120V fixture operating voltage. 300VA max. For use with Non-IC housings.
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → 277V/120V
- spec →
A 3" aperture specification grade adjustable housing platform that accepts 50W maximum low voltage MR16 tungsten-halogen lamps. Suitable for 2x10 residential framing or commercial installation. The platform is airtight to prevent energy loss, room drafts, dust marks on ceilings and reduce sound transmission. Units may be used in direct contact with insulation and building products. A complete fixture requires two components; a P3MRREMOTE housing platform and a 3" IRiS optical element. Elements may be changed after installation to provide a variety of distributions. Requires a remote low voltage transformer supplied by others.
- category
- subcategory
- environment
- spec delta
- wattage: 20W → 71W
- spec →
Transformers reduce line voltage to 12 volts for use with Lumiere low-voltage fixtures. Transformers are available in four basic types: hard wire installation, cord and plug, in-ground, and solid state.
- category
- subcategory
- environment
- spec delta
- voltage: 24DCV → 120V
- wattage: 20W → 300W
- spec →
Cooper Lighting's Modular Power Supply allows external fixture access for safe and easy installation and service. There is no need to remove lamps or reflectors to disconnect fixture power with the Modular Power Supply. Access to the individual fixture's power supply allows servicing without turning off all the fixtures disrupting occupants. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
- category
- subcategory
- environment
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps WAC Lighting
Full directory →2 rep agencies carry the WAC Lighting line across 2 states. Pick your state.
Florida FL1 agency
- Lighting Reps, LLCLegrand
Miami
Illinois IL1 agency
Chicago
Line cards are directional — confirm coverage with the agency before routing a spec.