CPY3-G
Canopy
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The VT3 LED Series is an energy efficient industrial Vaportite fixture that features rugged and durable construction. The VT3 incorporates a sealed and gasketed, reinforced fiberglass housing with a high impact diffuser. This VT3 optical performance is ideal for interior and exterior applications including parking garages, food processing, canopy, manufacturing and complex environments.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- wattage: 22W → 69W
- spec →
The Low Profile Canopy Series offers a brighter solution for a wide range of canopy applications. These energy-efficient fixtures produce a smooth and uniform light pattern that eliminates glare and wasted light.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
A series of very compact LED floodlights with mounting canopy and outrigger arm. This family of floodlights is available in various sizes and light distributions. When paired with the comprehensive range of accessories, this family of luminaires sets the floodlighting standard with regards to cost effectiveness, compactness and efficiency.
- category
- subcategory
- environment
- voltage
- CRI
- wattage
- +1 more
- cct: 3000K → 4000K
- spec →
The energy savings, long life, and easy-to-install design of the D-Series LED Surface Canopy luminaire make it the smart choice for canopy lighting in commercial, industrial and institutional
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- wattage: 22W → 107W
- spec →
Modern with its clean geometric design, the Juno Trac-Lites™ R610L Series with Canopy Mount option blends seamlessly within any environment. Delivering 2200 lumens while consuming only 21 watts and
- category
- subcategory
- environment
- voltage
- CRI
- wattage
- +1 more
- cct: 3000K → 2700K
- spec →
CanLume S20 The CLM-S 20” Recessed Gas Station Canopy luminaire with mounting system designed for typical canopy steel pan structures is available with an optical distribution designed to replace HID lighting systems up to 400w MH or HPS. The fixture housing is designed to emulate legacy HID canopy lights that mount through a 4 minimum diameter cut hole in the canopy. A galvanized steel back plate is provided to allow for installation over larger holes. Driver and power connection are made in an IP66 rated powder coated die cast mounting box above the canopy. Mounting heights of 12 to 20 feet can be used based on light level and uniformity requirements. BAA compliant. UL listed for wet location. IP66 rated.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- wattage: 22W → 160W
- spec →
3-1/2-Inch Indoor Round Flexible Cable Pendant Mount Cylinder. Color Rendering Index : 80-89,90-100; Correlated Color Temperature : 2700K,3000K,3500K,4000K; Environment : Indoor; Light Distribution Detail : Spot,Medium,Flood,Wide Flood,Wall Wash; Light Source : LED; Listings : cCSAus,Damp Location,ENERGY STAR® Certified; Lumen Output : 1001-1500,1501-2000; Mounting : Flexible Cable Pendant, Track Mount,Flexible Cable Pendant, Canopy Mount
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: UNV → 120V
- spec →
Pendant mounting kit for 4' LED Wraparound only. Includes canopy, (2) hooks and (2) aircraft cables. Cable Length: 8' Compatible Fixture: NLWPSW-4L334W: 48" LED Wraparound with Selectable Lumens & CCT
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- wattage: 22W → 67.8W
- spec →
An energy saving solution for building entrances/exits and perimeters, the Wallpack® Full Cutoff LED brings a modern architectural style that will blend into the building during the day and provide
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
The trumpet-shaped top shade provides illumination of the area above the three lower shades, which primarily direct the light downwards. A base reflector and a blue glare ring protect against glare from all angles. The strongest light is directly under the fixture. The shades have a matte white painted finish to ensure very comfortable lighting. Poul Henningsen designed the three-shade system during 1925/1926. The first lights using the system were designed for an exhibition in Paris. His work with Louis Poulsen continued until his death in 1967. Throughout his life, PH sought to create glare-free lighting; aiming to direct light where it was most needed, and creating soft shadows while using incandescent bulbs as a light source. The four-shade system was launched in 1931 to create a fixture that could be mounted high up and serve as an alternative to the commonly used chandeliers. The PH four-shade fixture was designed to increase the amount of light emitted horizontally to provide greater illumination of walls and shelves than was possible using standard three-shade lights. It was removed from the Louis Poulsen standard range in the 1940s, but was redesigned in 1979 by Danish architects, Sophus Frandsen and Ebbe Christensen, for the Charlottenborg exhibition building in Copenhagen (although in a larger size: PH 6½/6). To resolve the never ending glare problem, the two architects decided to add a small blue shade to the design. They also included a new surface with a more matte, white painted shade, to achieve a more even, comfortable light, ideal for museums and exhibition rooms or as general lighting in rooms with high ceilings. A smaller version, the 5/4½, was created for the Aarhus Concert Hall in 1984.
- category
- subcategory
- environment
- voltage
- CCT
- wattage
- +1 more
- voltage: UNV → 120V/277V
- spec →
The LS series garage lights are the high-performance solution for the most demanding applications within a patented air cooling design. With an expected service life of 70,000 hours and an easy-install design, it provides an affordable initial cost and low total cost of ownership. With high lumen packages and precision refractive optics, the LS series can meet superior illumination performance requirements.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- wattage: 22W → 70W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →