BLADE 18 OUTDOOR WALL
The contemporary aesthetic of the Blade 18 outdoor wall sconce by Sean Lavin creates soft indirect, reduced-glare illumination by aiming light back against the wall for accenting architecture as well as for wayfinding. The Blade 18 exterior wall sconce features selectable CCTs (2700K or 3000K) and is wet listed IP65 which makes it ideal for commercial applications as well as for residential use.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
OBD™ Flex Optics - Flexible linear lighting with on-board optics for grazing, wall washing, and architectural accents. Suitable for wet locations IP65
- category
- subcategory
- environment
- CCT
- spec →
20° Narrow & Asymmetric Beam. Flexible linear lighting with on-board optics for grazing, wall washing, and accents. Suitable for wet locations (IP65) and outdoors. Achieve professional-grade grazing and washing effects with the benefits of field cuttability. Make your fixture fit your space, not the other way around.
- category
- subcategory
- environment
- CCT
- spec →
The Cooper Lighting Solutions GUV Chamber is an eco-friendly and cost-effective tool that uses ultraviolet-C (UV-C) light sterilization to eliminate viruses and other pathogens. The chambers disinfect objects with the power of light. The chambers comply with all applicable regulations and standards (UV-C RISK GROUP 3IEC 62471).They are combined with safeguards such as controlled-access PIN number.
- category
- subcategory
- environment
- spec →
Regressed lens adjustable shower trim with reflector is designed for use with IC or Non-IC AIR-TITE 3" Halo small aperture line and low voltage housings. Models 3007WHC, 3007PCC and 3007SN have nonconductive and non-corrosive polymer trim rings. Models 3007AC and 3007TBZ have die-cast trim rings. This wet location listed shower trim uses MR16 low voltage or GU10 line voltage lamps, ideal for accent and task lighting. Regressed lens trim offers 15° tilt with 360° orientation within housing.
- category
- subcategory
- environment
- spec →
The iO Lighting MiniO Flex-Optic maintains the minimalistic form factor of the MiniO family while cleverly illuminating curvatures in architectural details. Four optimized optical distributions across four color temperatures provide enhanced, essential layers of light. The MiniO family reinforces creative design freedom with minimalistic flexible forms of light and remote drivers. Ideal for indoor or outdoor organic architecture where flexible top-bend architecture is necessary to illuminate small spaces. Utilize as a wallgrazer in a linear run with one of the four co-molded optical-grade silicone options, placing light on the desired details. This MiniO minimalistic, flexible form factor is available in 0-10V dimming via remote driver and creates runs up to 16.4' on a single power supply.
- category
- subcategory
- environment
- CCT
- spec →
A 4" square aperture specification grade lens angle cut reflector for 75W maximum MR16 or AR70 tungsten-halogen and 20W maximum MR16 ceramic metal halide lamps. Provides for up to 45° of lamp tilt. Distribution based on lamp beam angle. Use for accent lighting or general area illumination on slope ceilings up to 12/12 pitch. Wet location listed and suitable for use above food preparation areas.
- category
- subcategory
- environment
- spec →
The Lanterra 1000 Series of Accent & Flood luminaires offer incredible versatility in a highly durable construction to fit a wide range of applications. Available in three sizes 1002 (2.5"), 1003 (3.25"), and 1004 (4.25") the light heads mount via a rear center swivel with a 180° tilt and 340° rotation range allowing you to illuminate each layer of foliage, focal points, and façades in your environment. Specify the mounting option and optics to best fit your application, and fine tune light output with up to two optical accessories at a time.
- category
- subcategory
- environment
- CCT
- spec →
The contractor Commitment Kit is a supplementary offering intended as an aid for installation and maintenance of Metalux™ fluorescent fixtures. The kit is comprised of several common lighting accessories to provide the contractor with increased value and convenience. Kit contents include Fluorescent lampholders, lamp clips, screws, fasteners and striplite end plates and socket tracks. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
- category
- subcategory
- environment
- spec →
The DMX light controller Output Interface (SCD96-NA) can control virtually any standard DMX device such as RGB fixtures, moving lights, dimmers, and effects. This unit provides DMX output that tracks 96 channels in the WaveLinx Wired system. These allow lighting sources that use DMX as the control signal to be used as part of the WaveLinx Wired system. This compact unit can be mounted virtually anywhere.
- category
- subcategory
- environment
Most wall luminaires are both decorative and functional. When arranged in a row or as a group, they create a visual rhythm to lead your eye through a space. Their light distribution is often used to accentuate architectural features.
- category
- subcategory
- environment
- spec →
The 4421C is a static white, wet niche swimming pool fixture. The fixture will accentuate pools with breathtaking color temperatures, offering the latest LED innovations and advanced energy-saving
- category
- subcategory
- environment
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →