QSRW1
Quick Ship Razar Wall Mount The Quick-Ship Razar Wall Mount (QSRW1) from U.S. Architectural Lighting is the quick-to-configure-and-ship version of the Razar Series Wall Mount luminaire. This contemporary wall mount fixture features a compact, lens-free design, with a high performance PLEDTM optical system. It is made of heavy cast low copper aluminum featuring integral cooling fins for thermal management. It houses an IP66-rated PLEDTM optical module, with LED emitters enclosed in sealed refractors for efficient light distribution. The QSRW1 supports 0-10V dimming and operates at 120-277V. Its electrostatically applied TGIC polyester powder coat finish ensures durability. Available in 3000K and 4000K CCT options, it delivers superior performance with included surge protection and optional house-side shielding. BABA compliant. UL listed for wet location. Optics are Dark Sky compliant with a U0 BUG rating for specific configurations.
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
The rugged, one-piece die-cast aluminum housing features a complete heat sink hat optimizes heat dissipation through convection cooling management. Low profile, 3G vibration rated compact design minimizes wind load requirements. Housing is completely sealed against moisture and environmental contaminants.
- category
- environment
- voltage
- CCT
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
The Lumark WPLLED wall luminaire provides traditional architectural style with high performance energy efficient illumination. Rugged die-cast aluminum construction, stainless steel hardware along with a sealed and gasketed optical compartment make the Wal-Pak virtually impenetrable to contaminants. IP66 Rated. UL/cUL wet location listed. Replaces up to 450W metal halide equivalent. The WPLLED wall luminaire is ideal for pathway illumination, building entrances, vehicle ramps, schools, tunnels, stairways and loading docks.
- category
- environment
- mounting
- voltage
- CCT
- wattage
- +1 more
- voltage: 120V/277V → 277V/347V
- spec →
Our LED Wet Location fixtures offer higher performance and efficiency for a wide range of lighting applications. These robust fixtures are easy to install, provide smooth light output, and are available in 5 different housing sizes in a variety of configurations.
- category
- environment
- voltage
- CCT
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
Altitude® 2.0
- category
- environment
- voltage
- CCT
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
LED VANDAL RESISTANT OUTDOOR SURFACE/WALL BUY AMERICA COMPLIANT The VANDALEX® IV Series 180 is a durable, high-quality surface/wall mount fixture. The housing is constructed of an injection molded polycarbonate, available in a black or white finish, with an ingress resistant gasket. The diffuser is also made of an injection molded UV stabilized polycarbonate, fully gasketed to prevent moisture intrusion. Several lumen packages and color temperatures are offered to suit any need. The unit is rated for wet location and is applicable in coastal settings. All units are equipped with an Energy Star LED light engine.
- category
- environment
- mounting
- voltage
- CCT
- spec delta
- wattage: 400W → 34W
- spec →
Sabre is a surface-mounted, tubular architectural luminaire defined by clarity of form and a calm, continuous glow. Evenly diffused light is delivered along the length of the fixture through a refined tubular lens, shaping walls, ceilings, and circulation spaces with softness and restraint. Subtle illuminated joints maintain visual continuity, allowing the light to read as a single, composed element within the architecture. The aluminum housing is complemented by finished side elements offered in architectural finishes developed to align with standard metal tones. These materials bring warmth and cohesion to the fixture, allowing Sabre to integrate naturally with surrounding surfaces while maintaining a quiet, considered presence over time.
- category
- environment
- voltage
- CCT
- housing
- spec delta
- wattage: 400W → 10.5W
- spec →
The 1182-AL In-Grade fixture, with COB LED technology and precision optics, is a compact 5-inch diameter luminaire offering high-performance lighting. Features a durable aluminum door, magnetic hot aiming system, and watertight design. Delivers 1300+ lumens in CCTs from 2700°K to 5000°K, 10,000-pound load tested, IP68 rated.
- category
- environment
- voltage
- CCT
- housing
- spec delta
- wattage: 400W → 14W
- spec →
FRUIT 1 SURFACE MOUNTED – STANDARD GRADE offers a unparalleled value cost proposition in 7 standard sizes ranging from 23.6 to 196.9 inch diameters. Direct lighting from 3000K to 5000K.
- category
- environment
- voltage
- CCT
- wattage
- housing
- +1 more
- voltage: 120V/277V → 277V
- spec →
Unique Mission style design that emphasizes simple horizontal and vertical lines and flat panels are key architectural components. ADA compliant with a durable extruded white textured polycarbonate or optional Amber Honey, Beige, or Opal Alabaster lens. BAA/BABA Complaint
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- wattage: 400W → 20W
- spec →
The Fail-Safe FMS combines maximum security construction features with energy saving technology. Utilizes a one-piece housing, security lensing and tamper resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. ETL listed for damp locations, wet location under covered ceiling optional.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- wattage: 400W → 14W
- spec →
Linear Dimming Control Module Plenum Rated (LDCM-PL) takes a 0-10V dimming signal and converts it to an ELV dimmed output for up to 1000W with a 277V load and 450W on a 120V load. The LDCM-PL is rated to directly mount to a junction box in a plenum space for easier installations and to meet building requirements.
- category
- environment
- voltage
- wattage
- spec →
The H27RT housing is designed for remodeling use in shallow ceiling. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H27RT is designed for use in non-insulated shallow ceilings. If ceiling insulation is present, it must be kept 3 inches from all sides of housing.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120V
- spec →
LSF Selectable Flood Series
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120-347V
- cct: 3000/4000K → 5000K
- spec →
Cambria 213 is an ultra-compact low voltage LED and halogen MR16 fixture. It features a unique hanging design that allows placement where standard mounting methods are not possible. Various lenses, louvers and color or dichroic filters can be combined - up to three at once - to create multiple lighting effects.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 120V
- wattage: 400W → 50W
- spec →
The GWS Galleon Wall Slim features a thin profile available in three housing sizes, offering an impressive range of lumen outputs and optical distributions. With appropriate mounting heights ranging from 8' up to 40', the GWS offers several controls options for standalone or networked configurations.
- category
- environment
- voltage
- CCT
- wattage
- spec delta
- voltage: 120V/277V → 277V/347V/480V
- spec →
The Metalux™ Electronic Undercabinet Series provides an efficient task lighting solution for any decor. Available in either the Ultra Slim profile with T5 lamp technology or Slim profile with T8 lamps. The electronic undercabinet series is not only high quality but an excellent value with post-painted housings, 100% acrylic non-yellowing lenses, and color corrected lamps. Available in various lengths, the undercabinet fixture conforms to various applications such as kitchens, offices, study areas, displays, computer stations and any other application where an inconspicuous light source is required. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 120V
- wattage: 400W → 32W
- spec →
Omni from NeoRay is where form meets function with delightful results. Omni is attractive, contemporary lighting designed with eye comfort in mind. Perfect for the hospitality industry, bars, and restaurants. Discreet baffled technology is available to provide ultra-low UGR values to go along with Omni's unique aesthetic.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- wattage: 400W → 87.7W
- spec →
The 865 is a functional, decorative, and high performing modern wall sconce. The classic circular profile gets a modern update with a vacuum-formed lens that produces soft, indirect lumen outputs. The 6 metallic paint finishes offer clean, minimalistic aesthetics, making this specification-grade product perfect for commercial applications. The 865 is available with an integral LED light source and 6 metallic paint finishes, in 2 standard sizes. The 83+ CRI LED source is available in four CCTs, allowing you to select your lighting for the task at hand (or mood you wish to create). The Shaper 800's are known for high output, quality, durability, and minimalistic aesthetics that deliver lumen performance you can count on.
- category
- environment
- mounting
- voltage
- CCT
- housing
- +1 more
- voltage: 120V/277V → UNV
- wattage: 400W → 29W
- spec →
Juno® 18AWG 2-conductor wire is available in 10- or 25-foot lengths and is offered in black or designer white.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 120V
- wattage: 400W → 60W
- spec →
The Pillar wall mount luminaire merges a classic aesthetic with an elevated performance. Its asymmetric, indirect optic is artfully calibrated to deliver enhanced light across classrooms, commercial
- category
- environment
- mounting
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 120V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →