ABR61
Size: 3.5" dia. x 14"h, or 6" dia. x 24"h; Rated: Indoor & Outdoor; Illumination: 2x4.5W LED or 2x15W LED; Color temp.: 3000K, 3500K or 4000K; Voltage: 120V and 277V; Finishes: Painted finishes; Dimming: 0-10V; Emergency
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The MMS Multi-Mount Selectable Panel is a versatile selectable panel that can mount directly to the ceiling or wall without the cost and labor of a surface mount kit. In addition, it can be recessed or suspended (with kit) to make it the "go to" panel for any mounting requirement. The MMS comes standard with (5) selectable CCT in the more decorative smaller form factors and (3) selectable CCT in the more commercial larger form factors- all in standard 90 CRI superior color quality. The innovative backlit design delivers a smooth fully luminous lens and offers a intuitive snap and lock design that allows the contractor positive assurance when installing. The Multi-Mount panel is a great solution for commercial spaces like schools, offices, multi-dwelling, and healthcare spaces where mounting directly to the ceiling or wall is required.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V/277V → UNV
- spec →
The BLTR Relight Series provides quick, easy installation into most existing fluorescent troffers and parabolics. Get the look, feel and performance of a full fixture replacement at the fraction of
- category
- subcategory
- environment
- voltage
- lumens
- CCT
- +2 more
- voltage: 120V/277V → UNV
- spec →
<h5><strong>Meet BEAM V2 (7178). Model #'s 7176 and 7177 have officially merged to create the now-current 7178.</strong></h5>Key notes: This product is ADA compliant in its standard configuration. Unlike the 7176/7177, the 7178 mounts to a 2x4 single gang j-box, due to its redesigned slim housing. If needing to mount to a 4x4 j-box, refer to spec sheet "Accessories" section for a specifiable cover plate. The BEAM V2 is a wet location rated product featuring a modern, architectural aesthetic. With four sizes available, this product is ideal for decorative exterior facades, breezeways, commercial interiors, bathrooms, healthcare and even stairwells (battery options available). Constructed of heavy duty extruded aluminum with a stout, uniformly illuminated frosted acrylic diffuser. Contact factory for 7176/7177 replacement parts or special order requests.
- category
- subcategory
- environment
- voltage
- lumens
- CCT
- +2 more
- voltage: 120V/277V → UNV
- spec →
The MaxLite LED U-Bend Ballast Bypass Lamp is an energy-saving, longlasting replacement for fluorescent tubes in T8 U-bend troffers, including fully enclosed ...
- category
- subcategory
- environment
- voltage
- lumens
- CCT
- +2 more
- voltage: 120V/277V → UNV
- spec →
Fits 4" Octagon and Square junction boxes (1 1/2" Minimum in depth) Fits 4" and 6" housings and optional mounting accessories 120/277V, 0-10V Dimmable Switch to desire CCT: 3000K, 3500K, 4000K Edge-lit LED technology Glare controlled lens IC Rated and Wet Location Rated JA8 2022 E-Compliant ETL Listed 9" O.D. x 5/8" H
- category
- subcategory
- environment
- voltage
- lumens
- CCT
- +2 more
- wattage: 30W → 17W
- spec →
Ø1-3/8” arm mount LED luminaire, remote driver Part of the Tubular family of LED luminaires, the BSS501 is an arm mounted model ideally suited for wall wash and stack lighting. Slender aluminum arms project the Ø1-3/8” extruded aluminum housing from a wall or ceiling. A frosted acrylic lens diffuses the light from high quality diodes, while a generous range of rotation allows for flexible aiming.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- lumens: 1575 → 535
- spec →
EarthBulb direct wire LED linear T8 lamps eliminate the need for electronic ballast or drivers for maximum energy savings. This 5000K color temperature lamp consumes only 10.5 watts to produce 1700 lumens. A high Color Rendering Index (CRI) of 82 insures excellent color clarity. The 300 degree beam angle provides a wide distribution pattern and is perfect for directing more light to the working surface from existing troffer fixtures and strip fixtures as well as task and display lighting applications. Perfect for replacement of T8 fluorescent tubes. This lamp is engineered for high lumen maintenance over its 50,000 hour rated. This lamp features a flexible design allowing for single-end or double-end operation on 120-277V. To install, simply remove the existing fluorescent ballast and direct wire the line voltage. Direct wire quickly, no lamp holder modifications necessary, just run the black (load) to the one end and white (neutral) to the other. Operates on 120-277V.
- category
- subcategory
- environment
- voltage
- lumens
- spec delta
- cct: 3000/3500/4000K → 5000K
- wattage: 30W → 10.5W
Halco ProLED Edgelit Flat Panel 2x2 30W 3500K 4000K or 5000K 0-10V Dimmable 120-277V Applications include office grid or drop ceilings. Emergency Battery Backup options. Halco sku #s 81963 81964 81965
- category
- subcategory
- environment
- voltage
- CCT
- wattage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →