IR Quattro SLIM XS DCS
PIR Occupancy Sensor. Ceiling Mount Recessed. Noticeably Inconspicuous. IR Quattro SLIM XS, the extra-slim presence detector in concealed-box format. Fits into any standard concealed box. Overall height of just 6 mm. High-precision 360° infrared senor with globally unique retina lens and 16 sq.m square presence detection zone (4 x 4 m). The extra slim IR Quattro SLIM XS presence detector virtually disappears in the wall or ceiling. Thanks to the new and practical concealed box format it forms a remarkably unobtrusive symbiosis with the office environment and can now be installed in any standard concealed box. In short: our slimmest presence detector would seem to be pretending it wasn't even there - and yet is absolutely present when it matters.
Cross-References
Top equivalents — 7 across 5 brands
Compare top 3 →- spec →
impress™ DMX offers the same sophistication and elegance of our Collageimpress™ architectural controls using DMX512 communication for simple integration into any DMX-based lighting system. All of our stations offer a state- of-the-art capacitive touch interface for architectural lighting control. impress™ DMX provides control for up to 120 single or multi-channel zones across 512 DMX outputs, 18 presets, and includes support for color LEDs with virtual intensity control for RGB fixtures. This system is ideal for restaurants, themed-retail, conference rooms, houses of worship, convention centers, and theater house light control.
- category
- environment
- voltage
- spec delta
- voltage: 12-22.5V → 12V
- spec →
This SBL Series X-RAY ON indoor, blankout, LED backlit sign is designed with a matrix of energy efficient LEDs illuminating a block-style message. The sign features blankout technology that only displays the sign message when illuminated.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed.
- category
- environment
- voltage
- spec delta
- voltage: 12-22.5V → 12-24VDC
- spec →
The INTELLIGENT LIGHTING CONTROLS family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage INTELLIGENT LIGHTING CONTROLS 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. INTELLIGENT LIGHTING CONTROLS products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in addition to an on/off button.
- category
- environment
- voltage
- spec delta
- voltage: 12-22.5V → 12-24VAC
- spec →
SENSORWORX® wide view and hallway occupancy sensors enable mounting to a wall, corner, junction box, or conduit. This flexibility reduces contractor installation time and provides a secure and clean finished appearance. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, these SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited.
- category
- environment
- voltage
- spec delta
- voltage: 12-22.5V → 12-24VAC/DC
- spec →
Versatile driver for most high-performance dimming applications.
- category
- environment
- voltage
- spec delta
- voltage: 12-22.5V → 12V
- spec →
This SBLF Series QUIET MEETING IN PROGRESS indoor, LED backlit sign features a block-style message that is readable without illumination. The message is viewable when off and can be illuminated to add emphasis to the message or to optimize readability in low light conditions.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed.
- category
- environment
- voltage
- spec delta
- voltage: 12-22.5V → 12-24VDC
- spec →
The SENSORWORX® family of ceiling mount occupancy sensors provides a range of control solutions for spaces with finished ceilings (e.g., tiles, sheetrock, and plaster). Preferred by contractors for their simple, yet flexible, mounting methods, SENSORWORX sensors reduce installation time and fuss. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited. Enhanced options for this sensor family include a photocell that will override lights off if sufficient ambient light is present and an isolated relay for interfacing external systems (e.g., HVAC/BAS).
- category
- environment
- mounting
- voltage
- spec delta
- voltage: 12-22.5V → 12-24VAC/DC
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Steinel
Full directory →2 rep agencies carry the STEINEL line across 2 states. Pick your state.
California CA1 agency
- LINX Lighting + ControlsSignify (Philips)
San Diego
Nevada NV1 agency
Las Vegas
Line cards are directional — confirm coverage with the agency before routing a spec.