IR Quattro DIM-24
PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro DIM-24 is a low voltage passive infrared presence detector setting a new standard in lighting and 1-10 volt dimming control with minimal movement required for human presence detection. Provides for superior presence detection, energy savings and occupant convenience. Lighting is controlled in relation to both the presence of motion and ambient light levels. Operational choices of manual on or auto on with either momentary or maintained switch options. The Stay ‘ON’ time DIM before ‘OFF’ option provides basic illumination for the selected stay-‘ON’ time when ambient light falls below the selected brightness threshold that is set. This can be dimmed to 10% of maximum light intensity. As soon as a person is detected, the sensor switches either to 100% light intensity (constant-lighting controller ‘OFF’) or adjusts to the preselected brightness level (constant-lighting controller ‘ON’). When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brightness after the stay ‘ON’ time (1 min. - 30 min.) has expired or the daylight level exceeds the selected level of brightness. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. The available time saving wireless remote commissioning and set up tool and the user / occupant wireless remote provides addition convenience. The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).
Cross-References
Top equivalents — 5 across 3 brands
Compare top 3 →- spec →
The INTELLIGENT LIGHTING CONTROLS family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage INTELLIGENT LIGHTING CONTROLS 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. INTELLIGENT LIGHTING CONTROLS products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in addition to an on/off button.
- category
- environment
- voltage
- spec delta
- voltage: 18-24VAC/VDC → 12-24VAC
- spec →
SENSORWORX® wide view and hallway occupancy sensors enable mounting to a wall, corner, junction box, or conduit. This flexibility reduces contractor installation time and provides a secure and clean finished appearance. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, these SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited.
- category
- environment
- voltage
- spec delta
- voltage: 18-24VAC/VDC → 12-24VAC/DC
- spec →
Compatible with a wide range of dimmers and control systems including Lutron Homeworks and its derivatives, this is the default driver for sensitive dimming applications such as high-end residential and luxury hospitality.
- category
- environment
- voltage
- spec delta
- voltage: 18-24VAC/VDC → 24V
- spec →
The SENSORWORX® family of ceiling mount occupancy sensors provides a range of control solutions for spaces with finished ceilings (e.g., tiles, sheetrock, and plaster). Preferred by contractors for their simple, yet flexible, mounting methods, SENSORWORX sensors reduce installation time and fuss. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited. Enhanced options for this sensor family include a photocell that will override lights off if sufficient ambient light is present and an isolated relay for interfacing external systems (e.g., HVAC/BAS).
- category
- environment
- mounting
- voltage
- spec delta
- voltage: 18-24VAC/VDC → 12-24VAC/DC
- spec →
CELESTE™ Dim-to-Warm Linear Lighting delivers outstanding color rendering and dynamic performance for experiential environments like residences, restaurants and entertainment spaces. Advanced on-board circuitry eliminates the need for proprietary control systems in favor of a dimmer and power supply.
- category
- environment
- voltage
- spec delta
- voltage: 18-24VAC/VDC → 24V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Steinel
Full directory →2 rep agencies carry the STEINEL line across 2 states. Pick your state.
California CA1 agency
- LINX Lighting + ControlsSignify (Philips)
San Diego
Nevada NV1 agency
Las Vegas
Line cards are directional — confirm coverage with the agency before routing a spec.