SS3SMO, SS3SMI, SS3SMR
Spectrum’s A Spec 3" recessed square downlight series features a super shallow plenum housing and variety of trims for accent and general illumination.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The WCSDB Commercial downlight is equipped with a convenient selectable color temperature and wattage dip switch, making it versatile for a wide range of applications.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +3 more
- voltage: 120V → UNV
- wattage: 7W → 38W
- spec →
6 inch LED recessed downlight designed for vandal resistant or sealed / medical applications. Lumen packages from 1000 - 7000 lumens with color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, and 5000K. Available with dim-to-warm technology. Choose from an open reflector, or an enclosed version with a bottom lens or a bottom trim ring with lens. Available with lens thicknesses up to 0.375", with standard or tamper-resistant stainless steel countersunk screws.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +3 more
- voltage: 120V → UNV
- beam_angle: 9° → 50°
- spec →
A standard in the industry for both light commercial and residential LED applications, the remodel housing accepts a wide variety of trims allowing for a number of different lighting effects. The H750RICAT housing is for installations where the housing will be in direct contact with insulation and the AIR-TITE design meets restricted air flow requirements. The H750RICAT connector system provides high efficacy code compliance when used with HALO LED modules.
- category
- subcategory
- environment
- voltage
- CCT
- dimming
- +1 more
- wattage: 7W → 15W
- spec →
Recessed HC8R 8-10 inch and HC812R 12 inch nominal aperture retrofit LED downlights for installation in existing open frame commercial downlights. HC8R retrofit collar kit fits housing openings 8.73" to 10.3” diameter (includes 11.3” oversize matte white trim ring). And the HC812R retrofit collar kit fits housings of 12” diameter (includes 15.375” oversize matte white trim ring). HC8R/HC812R features an integral lens with damp and wet location listing in protected ceilings. Specify retrofit collar kit, LED module, and reflector separately to complete the luminaire.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +3 more
- voltage: 120V → 120V/277V/UNV
- spec →
Enjoy all the benefits of connected lighting technology in a sleek, versatile surface mount luminaire. This fixture doesn't require a housing, making it an easy solution for replacing existing light fixtures with smart, energy-saving LED. The BLD4 Smart Surface Mount is easy to install on junction boxes (including pancake boxes). It comes with all that HALO Home has to offer: wireless ON/OFF, dimming to 5%, and white tuning (2700K-5000K) along with more advanced features like Groups, Scenes, and Schedules. Install the free app on a smartphone/tablet to pair and wirelessly control these lights via secure Bluetooth connection. While compatible with standard ON/OFF switches, install HALO Home Controllers for optimal performance. Controllers provide HALO Home Smart Lights with constant power allowing them to strengthen and extend a HALO Home network by repeating and responding to wireless messages from any Controller, smartphone, or voice assistants* like Amazon Alexa or Hey, Google. White: BLD4089BLE40AWH
- category
- subcategory
- environment
- mounting
- voltage
- lumens
- +1 more
- spec →
3" aperture specification grade open downlight reflector. Suitable for use with 75W maximum low voltage tungsten-halogen or LED MR16 lamps, use also with integral LED light engine and reflectors. The 50° cutoff to lamp and lamp image provides a smooth, glare free distribution of light. Distribution based on lamp beam angle utilized. Use for task and general area illumination.
- category
- subcategory
- environment
- mounting
- voltage
- lumens
- +2 more
- wattage: 7W → 75W
- spec →
The Boca 631 is a tiny dual-lens in-ground fixture, 3 inches in diameter, for use with a low-voltage MR16 lamp. The non-adjustable beam provides a crisp, white halogen light source for grazing or uplighting in constricted areas. The dual lens design greatly reduces the top glass temperature and allows for installation in pedestrian areas. Designed for recess mounting in concrete, brick, stone or dirt, it is suitable for drive-over applications.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +2 more
- wattage: 7W → 50W
- spec →
The Define series by NeoRay is the ultimate in minimalist simplicity, providing clean, uniform lines of illumination in virtually any architectural environment. Besides delivering outstanding efficacy, it offers unmatched design flexibility with a variety of profile widths and mounting options available.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V → UNV
- spec →
The specification-grade, small aperture product family combines energy efficiency with superior cutoff, optical performance and control for architectural applications. A standard 0-10V driver dims to 1% and a multitude of optional drivers are available.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +3 more
- voltage: 120V → UNV
- beam_angle: 9° → 40°
- spec →
A wide breadth of options and features place the MRZ family in a class of its own—at an economical vantage point. Available in 1, 2, 3 or 4-head, it is is used in retail, commercial, and hospitality applications to intensify and illuminate spaces with high performance and quality. With multiple lumen packages, rotating heads, and a range of control options, MRZ is perfect for accent, wall wash, or ambient lighting.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V → UNV
- wattage: 7W → 16W
- beam_angle: 9° → 24°
- spec →
Hornet HP Select Round Downlight Family
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +4 more
- voltage: 120V → UNV
- lumens: 892 → 2200
- wattage: 7W → 23W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →