8085 (Tcl734 A 800/120 277 Vac) Exit Only (120 277 Vac) Led Sign
This TCL Series EXIT ONLY (120-277VAC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
EXIT/EM/CHICAGO features energy-efficient, long-lasting LEDs and two 5.3-watt Chicago-approved adjustable lamp heads.
- category
- subcategory
- environment
- voltage
- spec →
ECC This product series has been discontinued.
- category
- subcategory
- environment
- voltage
- spec →
A compact exit sign with dual color LEDs, allows end user to change the color from Red to Green in the field. The exit sign includes a maintenance-free NiCad battery to power the fixture during power loss for 90 minutes on a full charge. LED light sources require no maintenance for 25 years–saving greatly on maintenance and upkeep costs. LED exits are ideal for commercial and industrial standard non-emergency applications where low maintenance and operating costs are a must. LED Source: Internal switch changes the color of LEDs from Green to Red Colored Filters: Green and Red Filters are included with each sign Face: Double Face and Blank Face included Mounting: Wall, Side, or Ceiling Mounted. Mounting hardware and canopy included Input Voltage: 120V/277V input Battery: 3.6V 300mAh NiCad (nickel-cadmium) Testing: The manual test switch and indicator light are located on the bottom of the sign Accessories: NEG-60 (Wet Location Enclosure for Wall Mounting only) Listings: UL Listed for Damp Locations NFPA Certified to the energy efficiency standards of California Title 20
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120-277VAC → 120V/277V
- spec →
Ideal for wet location areas requiring exit signs for AC only or battery back-up power that are subject to saturation with non-mechanically delivered water. Contemporary designed polycarbonate
- category
- subcategory
- environment
- voltage
- spec →
ILLUMINATION • Ultra-bright, energy efficient, long-life Red or Green LED. ELECTRICAL • Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • 4.8V long-life, maintenance-free, rechargeable NiCd battery. • Internal solid-state transfer switch automatically connects the internal battery to LED board
- category
- subcategory
- environment
Single/double face configurable with supplied faceplate. 120V/277V. Sturdy ABS plastic housing. Side, top or back mounting. cUL or ETL listed.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120-277VAC → 120V/277V
- spec →
Low-Profile wet location Exit and Emergency combo unit, 2.5" deep. Available in white, black and grey. Stocked in selectable Red/Green for convenience. Long lasting, efficient, ultra bright white LED lamp heads. 1.0W (1 LEDs x 1.0 watt) per head. Adjustable LED lamp heads provide up to 18-ft center-to center spacing with 3-ft path of egress at 7.5-ft mounting height.
- category
- environment
- voltage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →