49288 (Tcl734 W 165/12 24 Vdc) 24 Hr Atm (12 24 Vdc) Led Sign
This TCL Series 24 HR ATM (12-24VDC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
Cross-References
30 equivalents across 19 brands
Compare top 3 →for use with 24V DC luminaires
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
Time Sync Hub (TSH-100/TSH-200)
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
The Aqua Driver 150 is a constant current dimming driver for 24vDC LED products. It can take an AC input from 100-277vAC and dims each channel via DMX. It can control up to 150W of multi color LED product, and manual colors can be set in instances where external control is not desired.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 277V/24DCV
Effortlessly power your smart outdoor lighting system with our 36W Plug-In Driver, designed specifically for low-voltage landscape lighting. Delivering a steady 24V DC output, this compact driver is ideal for powering smart landscape fixtures with consistent performance and minimal installation effort. With its plug-and-play design, setup is quick and convenient, no wiring required. Simply connect to your smart-compatible landscape lights and enjoy reliable power and seamless integration with your lighting control system. Housed in a durable, weather-resistant enclosure, this driver is built to handle outdoor environments while maintaining optimal performance.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
CBU-PWM4 is a Bluetooth controllable, Casambi enabled four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
24VDC, 3 Conductor Wire System
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
The ÉPIX Flex Boost is a plug-and-play, 24V in-line voltage booster that doubles the capacity of an ÉPIX Flex Drive output, allowing it to control a greater quantity of ÉPIX Flex 20 fixtures. This is the perfect solution for creating large-scale or extended-run lighting installations that require more fixtures than a single driver output can typically support.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
24V Wired Controller
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
Choose Kelvix's 24v low voltage dimmers for your next project. Contact us today to learn more.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
Discover 40-200W 24VDC power supplies with up to five Lutron hi-lume drivers featuring EcoSystem technology. Enjoy 100%-0.0% dimming.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
Power your LED systems with UL Listed non-dimming electronic drivers from Acolyte.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
24V plug-in driver to be used with Nora Lighting’s 24 Volt systems. Direct connection to a wall outlet. Input Voltage: 120VAC Ouput Voltage: 24VDC Wattage: 45W Dimming: Non-Dimmable Cord Length: 6' Accessory: NATL-302W: 5" Power Line Splitter Listing: cULus Listed
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 120V/24DCV
Low profile LED Adjustable Undercabinet Light allows beam aiming for highlighting objects. High brightness with excellent color rendition. 90 ° angle tilt. Linkable up to 12ft with easy installation. Wall switch dimming, see 24V magnetic drivers under Compatible Products (sold separately).
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
The Fresco Power Supply (FCS PS10) is a Class 2 low voltage power supply intended to power a single Fresco Touchscreen, or other 24VDC lighting control devices. The FCS PS10 is intended for use with
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
The INTELLIGENT LIGHTING CONTROLS family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage INTELLIGENT LIGHTING CONTROLS 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. INTELLIGENT LIGHTING CONTROLS products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in addition to an on/off button.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 12-24VAC
- spec →
4 Button Scene Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 12-23V
- spec →
SENSORWORX® wide view and hallway occupancy sensors enable mounting to a wall, corner, junction box, or conduit. This flexibility reduces contractor installation time and provides a secure and clean finished appearance. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance. Additionally, these SENSORWORX units are available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion will be limited.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 12-24VAC/DC
- spec →
24VDC 60W LED DRIVER Smooth flicker free dimming - Dimming range: 0-100%
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24vdc
- spec →
Versatile driver for most high-performance dimming applications.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 12V
Remote LED driver for use with BEGA 24V LED luminaires. LED driver rated 25W (19 580) and 50W (19 591). The 19 580 is not dimmable. The 19 591 is dimmable, 0–10V.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
Wall Mounted 120V/24VDC 96W
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 120V/24DCV
- spec →
24V Constant Voltage Class 2 Dimmable LED driver can be used with Nora Lighting's 24 Volt systems. Three channels each produce 96 watts and can be dimmed with Triac, ELV, MLV, 0-10V, or PWM dimmers. Enclosure is rated for wet locations and cULus listed. Input Voltage: 110V-277V Output Voltage: 24VDC Wattage: 3 x 96W Class 2 Circuits (288W) Dimming: Triac, ELV, MLV, 0-10V, or PWM Knockouts: Six Knockouts Listings: cULus Listed for Wet Locations Optional Accessories: NALTL-10: 10' Power Line Connector NALTL-30: 30' Power Line Connector
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 277V/24DCV
• 30W • 24V Electronic Driver NON-Dimmable • 120V - 240V Input
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 120V/240V/24DCV
- spec →
2 Zone ON/OFF Switch. Master ALL ON/OFF. STEINEL offers 10 DCS wall switches and a switch coupler as part of our Digital Control Solution. The DCS Series Switches are Class 2 devices powered by a low voltage bus provided by the DCS System and can be networked to control multiple loads on one or more controllers. The DCS Low Voltage Wall Switch is used for manual on/off, dim and scene selection of one or more lighting loads, from one or more locations. DCS wall switches available in white and black colors.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 12-23V
- spec →
The SENSORWORX low voltage decorator wall switch provides an attractive companion wall station for a low voltage sensor system. Many spaces now require by code (e.g., ASHRAE 90.1, IECC, Title 24) manual on, partial-on, or full range dimming user operation in addition to an occupancy sensor providing automatic off control. The simplest way of achieving this is by adding a low voltage wall station that interfaces with the power pack controlling the rooms lighting. Adding a switch to a low voltage sensor system also enables users to override a space’s lighting off if necessary. Functioning as a momentary switch, this one button wall station is intuitive to use and provides pleasant tactile feedback. Visually, the unit matches the SENSORWORX line of wall switch sensors, ensuring a consistent style across multiple spaces on a project. Additionally, the single button switch has an integrated locator LED with multiple color and intensity settings. Three button dimming units have an integrated 0-10V output, intuitive raise/lower buttons, and a five LED level indicator.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 5-24VDC
- spec →
24VDC 96W LED DRIVER Smooth flicker free dimming - Dimming range: 0-100%
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24vdc
Remote LED driver for use with BEGA 24V LED luminaires. LED driver rated 25W (19 580) and 50W (19 591). The 19 580 is not dimmable. The 19 591 is dimmable, 0–10V.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
- spec →
The AL Driver 800 is a multi-protocol, 800W driver for low voltage LED products. The input control protocols include DMX, RDM, 0-10V and DALI; and features 24V DC / PWM output. It offers maximum flexibility with your front end control preferences.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VDC → 24DCV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →