SignTexExit Signs
SignTex BLD

BLD

Attractive and easy to install exit sign combining quality LED illumination with contemporary, soft corner styling. Precision molded thermoplastic housing resists denting, peeling, scratching and corrosion.

housing material: Injection-molded engineering grade 5VA flame retardant thermoplastic (UL94 V-0)housing: • Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant,face config: Universal Single/Double Facelamp source: LEDbattery: 4.8V rechargeable NiCd (EM models)operating temp: 0°C - 50°C (damp rated)power consumption: Less than two wattsvoltage: 120-277V AC, 24V DC, 48V DCmounting: Wallhousing color: Black, White

Cross-References

Top equivalents — 12 across 12 brands

Compare top 3
  • Sage EmROWexactMFR STATED

    Compact Thermoplastic Exit Sign — Rowan · Series ROW

    spec →
  • LithoniaEDG 1 G EL M6partial

    Surface mount edge-lit with green letters, Ni-Cad battery.

    • category
    • voltage
    • duration
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DC120/277V
  • ParaflexPFX-5503weak

    PFX 5503 Thin Thermoplastic EXIT Sign. Ultra bright, energy efficient, long life Red or Green LEDs. Dual 120/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. 1.2V long life, maintenance-free, rechargeable NiCd battery (EM models only). Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DCUNV
    spec →
  • LiteLumeLL-WLCEMweak

    Low-Profile wet location Exit and Emergency combo unit, 2.5" deep. Available in white, black and grey. Stocked in selectable Red/Green for convenience. Long lasting, efficient, ultra bright white LED lamp heads. 1.0W (1 LEDs x 1.0 watt) per head. Adjustable LED lamp heads provide up to 18-ft center-to center spacing with 3-ft path of egress at 7.5-ft mounting height.

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DCUNV
    spec →
  • LuminosoLE XEL U1/U2 XM Nweak

    Our Edge-Lit features an integrated and pivot system that allows it to be installed on the wall, ceiling or sloped surface. Available in Red or Green lettering, single face on mirrored acrylic panel

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DC277V
  • AtLiteRXD - Exit Signweak

    The Rival RXD Series Die-cast Exit features aluminum housing with canopy and a brushed aluminum face. It has dual voltage input to meet a variety of needs. Long-life, energy-efficient LED lamps reduce energy costs and eliminate routine lamp maintenance. The premium sealed nickel cadmium batteries have a 15-year life expectancy. With ceiling, wall and end mounting the Rival RXD Series can meet any design needs. Universal, field-selectable chevrons add versatility. This series is UL damp location listed (indoor).

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DC277V
    spec →
  • Fail-SafeEXLweak

    The Fail-Safe EXL offers buyers one of the best high-abuse, specification-grade exit signs on the market. Its architectural low profile combines 14-gauge steel and a 1/8-inch polycarbonate lens to withstand the toughest environments. The door attaches to the housing with four tamper-resistant fasteners. LEDs power the unit for energy-efficient, even illumination. These fixtures are UL/cUL listed for damp locations. The EXL is specifically designed for use in public access areas where safety and security are critical; it is ideal for use in maximum security correctional facilities, public housing, schools, psychiatric wards, detention centers, military barracks, parks, and hospitals.

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DC120V
    spec →
  • Sure-LitesLPXW Seriesweak

    The LPXW series provides a UL924 compliant solution for outdoor exit requirements. The fixture is wet location listed with a temperature rating of (- 20°C to 50°C ). The UV stabilized polycarbonate housing is available in white, grey or black with red or green Exit letters. Labor savings self-diagnostics that perform required monthly and yearly testing are standard for the self-powered exits.

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DC120V/277V
    spec →
  • H.E. WilliamsEXITweak

    Williams EXIT series is available as universal single/double face unit and with your choice of full-time AC powered unit or emergency unit with battery backup.

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DCUNV
    spec →
  • IsoliteHZCweak

    The HZC Class 1 Div 2 Exit Sign and Emergency Light Combo has a durable design for institutional use. This unit is back-mounted only.

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DCUNV
    spec →
  • Advantage Environmental LightingCAEM1weak

    PRODUCT SPECIFICATIONS    ILLUMINATION  • Two, 6V/12V adjustable bi-pin halogen lamp heads. ELECTRICAL  • Dual 120V/277 voltage. • Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. • LVD (low voltage disconnect) prevents battery from deep discharge. • 6V Sealed lead acid, maintenance-free, rechargeable battery.

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DC120V/12DCV
    spec →
  • Nora LightingNEX752LEDweak

    Rugged 20 gauge steel luminaires comply with the latest New York City codes and performance standards. Stencil letters are 8" high with 1" stroke, with a minimum of 100' viewing distance rating as required by UL 924 standard. FEATURES Meets City of New York Emergency Code requirements 20-gauge steel housing with white powder coating Fully-illuminated 8" letters with 1" stroke Includes single and double faces Removable knockout chevron directional arrows Illuminates for 90 minutes during power failure Universal mounting (Wall or Side) HOUSING 20-gauge steel housing includes an additional face for a double-sided exit sign. Adjustable emergency heads feature a unique twist-locking collar. Low profile snap-together. Snap-out knockouts for wiring. MOUNTING Steel case includes two knockouts for side of wall mounting (hardware included). LABELS AND LISTINGS 5 year limited warranty Meets City of New York emergency code requirements (NY Approved) NFPA-101 cULus Listed for damp locations

    • category
    • environment
    • voltage
    • spec delta
    • voltage: 120-277V AC, 24V DC, 48V DCUNV
    spec →

Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →