2711.98-WL
As the rounded edges of this sculptural sconce curve inward, it conceals and reflects the integrated LED illumination within. The interplay between the smooth outer surfaces and the recessed center of Folds results in a pleasing wash of indirect light. Scaled to two sizes and suitable for indoor or outdoor use, the design delivers an ambient glow that is both functional and atmospheric. Available in Textured Bronze, Textured Gray, and Textured White finishes. As the rounded edges of this sculptural sconce curve inward, it conceals and reflects the integrated LED illumination within. The interplay between the smooth outer surfaces and the recessed center of Folds results in a pleasing wash of indirect light. Scaled to two sizes and suitable for indoor or outdoor use, the design delivers an ambient glow that is both functional and atmospheric. Available in Textured Bronze, Textured Gray, and Textured White finishes.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
HALO's RA Adjustable Recessed LED Trims are a complete line of LED Baffle-Trim gimbal modules that fit most 3", 4", 5", and 6" new construction or remodel recessed housings. These fixtures offer exceptional adjustability - aim light where you need it with the 35-degree tilt and 360-degree rotating eyeball. The RA product line is rated for damp locations, AIR-TITE for optimal efficiency, and is offered in either 5-color field-seleCCTable or dedicated color temperatures.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
Energy efficient LED retrofit module fits into standard 4” IC or non-IC recessed housings. Replaces 50W incandescent lamp, producing over 650 Lumens. Dimmable with most standard incandescent,
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- spec →
Bend design rules with Full Circle. Full Circle Arc segments feature radii from 2 ft. to 10 ft. and add a playfulness not seen in ordinary recessed installations. Build sweeping arcs of light with
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
Decorative Glass Wall Sconce 3000K or 3500K 90 CRI Up & Down Light
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +3 more
- voltage: 120V → UNV
- spec →
AC Onyx 5”/6” Retrofit Series requires no driver and allow for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 5” and 6” recessed housings. Deep regressed optics and round aperture deliver even and glare-free illumination. Features: Recessed mount into 5"/6" housing. Includes medium base socket adapter for easy retrofitting in 5"/6" recessed housings. Quick connector is compatible with dedicated LED housings. Required by some codes in recessed can applications or to meet energy rebate program requirements. Lumens / Wattage: 1150lm / 15.5W Color Temperature: Dedicated CCT (2700K, 3000K, 3500K, 4000K or 5000K) Dimming: Triac or ELV Accessories: NOX-56BAF: Baffle Insert NOX-56REFL: Reflector Insert NOX-56EYELID: 5"/6" Round Eyelid for Onyx NOX-56OR-W: 5"/6" Round Oversize Ring for Onyx
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
Fits ELCO 4" Dedicated LED Recessed Housings, Regular and Shallow. Soft white lens provides smooth lumen distribution and eliminates LED pixelation. Deep set LED trim reduces glare while providing area illumination. Medium base to quick connect adapter included (PSA30) Energy Star Certified. Title 24 JA8-2019 Compliant. Life Span of 50,000 hours L70.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
The fixture emits soft comfortable light. The glass is designed to provide a uniformly lit surface. The three-layer hand blown opal glass shade has a transparent edge, providing a decorative halo of light around the fixture. AJ Eklipta was designed by Arne Jacobsen in 1956 for Rødovre Town Hall. Two sizes were produced for this project: 13.7" and 17.7". They were used indoors on stairways and outdoors as wall lamps. A 8.7" version was later designed for St. Catherines College in England. Arne Jacobsen preferred the largest model when specifying his own projects. Today, AJ Eklipta is used worldwide and in a variety of architectural contexts.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
The Nova is a fully recessed motorized exam light that delivers 360 degrees of high-level illumination to all corners of the patient bed. Designed as a birthing light the recessed fixture offers a clutter-free approach and a safe alternative to traditional ceiling-mounted exam lights. Install the Nova anywhere within the room in a single or dual configuration to maximize light output and enhance clinical efficiencies. Conveniently control light intensity and direction for up to two Nova fixtures on one single-gang, low-voltage Wall Control Keypad.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- spec →
SSS Small Slot System The most minimalist of the slot systems, the Small Slot System provides aperture plates with a 2-1/4" diameter aperture. Configurable to any length, the Small Slot System uses fixtures with maximum output of 1600 Lumens and up to 98 CRI.
- category
- subcategory
- environment
- voltage
- CCT
- dimming
- spec →
Miniport LED is slim and can be recessed into a wall or floor using a Miniport junction box (sold separately, see page 2), which mounts to an octagon box or outdoor, wet-location electrical box. The fixture, with a 1 watt warm-white LED, features a 16 degree precise focus and tempered glass lens with a stainless steel, round beveled edge trim. Miniport is compatible with the TE-60L-12 power supply. The Miniport Eyelid version, which should be wall-mounted 4" from floor, includes LFMP-20D, a lens film to tilt the light beam 20 degrees. All Miniport versions include 5 year warranty. For custom quotes and layout assistance, send your drawings and ideas to our design team: design@PureEdgeLighting.com .
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
- spec →
DIMENSIONS — BASE MODEL NO. H Dia D SR-WG125 10″ 3″ 4 3/4″ — SPECIFICATIONS Dimming: 0-10V Dimming to 1% or 120V ONLY/TRIAC Dimming Mounting: Mounts to all Standard Electrical Junction Boxes (by others) With Hardware Provided. — PART NUMBER SR‑WG125- ___- ___- ___- ___- ___- ___- ___ Model No. Lamp Base Watts CCT (If Applicable) Finish Beam Spread Trim Finish Options SR-WG125 L LED 05 27K BL Black N 15° AB Black DRP Drop Lens 08 30K WH White M 24° AW White EML Remote 10W 10 35K SV Silver F 36° AG Dark Gold Emergency LED 13 40K PT (Custom)* W 60° AC Chrome Battery Backup 16 DTW3K (Dim 19 to warm 3000K>2000K) *(Consult Factory for more options)
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
- spec →
The FRW™ Fired Rated Wafer boasts a 2-hour fire rating in accordance with UL263 ASTM E119 & CAN/ULC S101 standards. Equipped with a field-selectable CCT switch offering a choice between 2700K, 3000K, 3500K, 4000K, and 5000K, it provides flexibility in lighting preferences. With Title 24 certification, 90 CRI, and two size options, the FRW™ delivers versatility, dependable performance, and easy installation.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →