WALL SWITCH SENSOR - LOW VOLTAGE: SWX-100-1 SERIES
The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SENSORWORX wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.
Cross-References
Top equivalents — 8 across 5 brands
Compare top 3 →- spec →
The INTELLIGENT LIGHTING CONTROLS family of wall switch occupancy/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage INTELLIGENT LIGHTING CONTROLS 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowed wall boxes. INTELLIGENT LIGHTING CONTROLS products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. For dimming adjustment, intuitive raise and lower buttons are present in addition to an on/off button.
- category
- environment
- voltage
- spec →
impress™ DMX offers the same sophistication and elegance of our Collageimpress™ architectural controls using DMX512 communication for simple integration into any DMX-based lighting system. All of our stations offer a state- of-the-art capacitive touch interface for architectural lighting control. impress™ DMX provides control for up to 120 single or multi-channel zones across 512 DMX outputs, 18 presets, and includes support for color LEDs with virtual intensity control for RGB fixtures. This system is ideal for restaurants, themed-retail, conference rooms, houses of worship, convention centers, and theater house light control.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VAC/DC → 12V
- spec →
This TCL Series MONTHLY | CREDIT CARD ONLY (12-24VDC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VAC/DC → 12-24VDC
- spec →
High Def. PIR Presence Detector. Ceiling Mount. Square & Scalable. The IR Quattro HD DCS is a digital, high definition, passive infrared presence detector setting a new standard in lighting control with minimal movement required for human presence detection. It features four pyroelectric detectors with a high performance lens system that creates a new global standard in detection with 4,800 switching zones. Included light level feature provides the option to dim and turn lights off when sufficient daylight is present for additional energy savings. The innovative mechanical reach setting allows a precise method of controlling lighting zones by means of optimizing the detection reach without compromising sensitivity. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VAC/DC → 12-22.5V
- spec →
Versatile driver for most high-performance dimming applications.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VAC/DC → 12V
- spec →Signal-Tech56835 (Tcl77 W 224/12 24 Vdc) Indicator Dot, Single With Optional Flashing, 4 In Dia, White (12 24 Vdc) Led Signweak
This TCL Series Indicator Dot, Single with Optional Flashing, 4 in dia, White (12-24VDC) outdoor, blank-out sign is designed with super bright LEDs and a contrasting face; we guarantee it's readable in direct sunlight. The sign message is formed by visible LEDs on a black sign face and is designed to illuminate the message(s) when turned on and blank out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. The cabinet is constructed of corrosion-resistant, extruded aluminum and ships with our Lift'N Shift back for wall mounting. Ceiling, post and wall-projection mountings are available. Standard cabinet finish is Duranodic Bronze; custom paint finishes are available. Sign can be controlled by a switch or third-party relay. Control switch can be purchased separately. UL/cUL Listed for wet locations.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VAC/DC → 12-24VDC
- spec →
40 kHz Ultrasonic Presence Detector. Ceiling Mount. Square & Scalable. The US Quattro DCS is a digital (40kHz) ultrasonic technology presence detector that utilizes STEINEL’s stateof-the-art ultrasonic signal processing to provide superior stable volumetric omnidirectional detection. Ultrasonic is used for best practice in design and retrofit applications where the sensor will not have a clear line of sight view of the occupants in the desired coverage area. Lighting loads are controlled in relation to both presence detection and selectable ambient light levels with the integrated photocell to maximize energy savings. The convenient polarity insensitive data line bus enables multiple sensors, photo sensors, switches and DALI2 fixtures to link together providing convenient code compliant solutions. Mounting options provide for 4” square box, 4” octagon box, round 3.0 mud-ring or directly to the ceiling with quick mount spring tabs. The Digital Control Solution (DCS) group of sensors are available in multiple technologies for the control of heating, ventilation and air conditioning as well as lighting. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a DCS Controller, which communicates to the sensor by the 2 wire bus.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VAC/DC → 12-22.5V
- spec →
Compatible with a wide range of dimmers and control systems including Lutron Homeworks and its derivatives, this is the default driver for sensitive dimming applications such as high-end residential and luxury hospitality.
- category
- environment
- voltage
- spec delta
- voltage: 12-24VAC/DC → 24V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps SENSORWORX
Full directory →38 rep agencies carry the SensorWorx line across 50 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco
San Diego · Ventura
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Apex Lighting SolutionsSignify (Philips)
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Lighting EnvironmentsSignify (Philips)
Statewide
Florida FL3 agencies
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
Jacksonville
+40 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.