EXCELSIORFD6
FD-6, 12V GY6.35/G4 20W, 3.5W LED accent light with frosted glass lens, silicone O-ring seal, and wet listed. Learn more today!
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Juno® Trac-Master® low-voltage designer transformers offer quiet operation and attach to all Trac-Master and Trac-Lites™ track. These low-profile, 12V, 60VA electronic transformers feature an on/off
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 20W → 60W
- spec →
The Stake-Mounted Junction Box is used for portable convenient placement of accent fixtures. To accommodate 12v or 120v 1/2" knuckle fixtures.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 12DCV → 120V/12DCV
- spec →
The TRIANT® 2 LED Puck Lights operate on a dual 12/24V platform for task and accent lighting in a small fixture.
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 20W → 100W
- spec →
The Exenia REVO SPOT LV Medium track-mounted line voltage fixtures utilize a driver integrated into the adapter to provide a clean, simplistic look....
- category
- subcategory
- environment
- wattage
- lens
- spec delta
- voltage: 12DCV → 120V
- spec →
Low Voltage Retrofit Kits provide an easy and affordable solution to convert existing standard 6" incandescent housings to high performance low voltage halogen fixtures. Kits are available either for MR16 light sources and require the use of a low voltage trim for either light source. Ideal for instantly changing general lighting to halogen spot and accent effects. Magnetic Transformer: Pre-mounted to socket plate. 120V Input, 12V Output with MR16 socket. Quick installation screw base to medium socket included. Minimum Clearances: NLK Retrofit kits are intended only for use as non-IC components and upon installation, the housing used for the kit must maintain minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components. Lamp Types: MR16 50W
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 12DCV → 120V/12DCV
- wattage: 20W → 680W
- spec →
Modern LED sconce with die-cast metal accent trim. White glass diffuser for even light distribution.
- category
- subcategory
- environment
- wattage
- lens
- spec delta
- voltage: 12DCV → 120-277V
- spec →
The Cooper Lighting Solutions GUV Chamber is an eco-friendly and cost-effective tool that uses ultraviolet-C (UV-C) light sterilization to eliminate viruses and other pathogens. The chambers disinfect objects with the power of light. The chambers comply with all applicable regulations and standards (UV-C RISK GROUP 3IEC 62471).They are combined with safeguards such as controlled-access PIN number.
- category
- subcategory
- environment
- lens
- spec delta
- voltage: 12DCV → 240V
- wattage: 20W → 785W
This Universal lampholder family from Halo provides a broad range of clean, stylish lighting. The specialized accessories make possible a customized lighting effect and lampholder look. Lampholders are offered in a symmetrical and an asymmetrical version and are for use with Halo, Power-Trac and Lazer-by-Halo track systems.
- category
- subcategory
- environment
- spec →
iO LED Lighting's line series .75 is approximately .75" x .75" in cross section. Its low profile housing enables functional luminous intensities from "tight" architectural details such as niches, coves and casework. Similar to halogen light sources, LEDs are point sources that offer superior definition to three-dimensional objects and sparkle to reflective surfaces. Series .75 is a low voltage linear accent luminaire that may be ordered in incremental lengths that range from 6" to 72" nominal. Beam spreads are available in 10°, 25° and 55°. The asymmetric beam spread is optimized for a forward throw distribution. Projected average rated life is 50,000 hours at 70% of lamp lumen output. line series .75 is LM79 and LM 80 compliant and UL listed for dry locations. Photometrics are available online.
- category
- subcategory
- environment
- spec delta
- voltage: 12DCV → 120V/277V
- wattage: 20W → 120W
A 5" aperture specification grade open slot cut reflector for 75W maximum low voltage MR16 tungsten-halogen lamps. Provides for up to 45° of lamp tilt. Distribution based on lamp beam angle. Use for accent lighting or general area illumination on slope ceilings up to 12/12 pitch.
- category
- subcategory
- environment
- spec delta
- wattage: 20W → 75W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →