EXCELSIORDL10L
12V LED down light with 6061 marine grade aluminum, silicone O-ring seal, and Teflon wire leads. Ideal for versatile downlighting applications.
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
The H457ICAT1E is an insulated ceiling, AIR-TITE™ housing offering 120 volt dimming capability with many incandescent or electronic low voltage dimmers. Designed for use with EL4 series LED Gen2 Light Engines and TL4 LED Series Trims, the H457ICAT1E offers high quality downlighting along with high efficacy – the result being great lighting and significant energy savings.
- category
- subcategory
- environment
- CCT
- lens
- spec delta
- voltage: 12DCV → 120V
- spec →
A 4-inch square aperture specification grade shallow lens downlight reflector for LED modules. Use for task or general area illumination where wider distribution and higher angle light is desired. Wet location listed and suitable for use above food preparation areas.
- category
- subcategory
- environment
- mounting
- CCT
- lens
- +1 more
- voltage: 12DCV → UNV
- spec →
The Boca 631 is a tiny dual-lens in-ground fixture, 3 inches in diameter, for use with a low-voltage MR16 lamp. The non-adjustable beam provides a crisp, white halogen light source for grazing or uplighting in constricted areas. The dual lens design greatly reduces the top glass temperature and allows for installation in pedestrian areas. Designed for recess mounting in concrete, brick, stone or dirt, it is suitable for drive-over applications.
- category
- subcategory
- environment
- mounting
- CCT
- lens
- +1 more
- voltage: 12DCV → 120V
- spec →
Designed for new construction, the adjustable accent downlight features field interchangeable optics, offering the ultimate in flexibility to satisfy specific application needs. The unique adjustable design allows the luminaire to be installed in sloped ceilings in addition to traditional flat ceilings. Offering 365° rotation and lockable tool-less 45° tilt with center beam optics provide full output without flash back. Optical system provides superior light control and low aperture brightness while delivering over 80 lm/W. Standard 0-10V driver dims to 1% with a multitude of optional drivers available.
- category
- subcategory
- environment
- mounting
- CCT
- lens
- +1 more
- voltage: 12DCV → UNV
- spec →
The Juno® IC4ALFW FireWall™ 4-inch Fire-Rated internally adjustable downlight caters to a wide range of application possibilities with just a change out of the trims. The new construction housing
- category
- subcategory
- environment
- mounting
- CCT
- lens
- +1 more
- voltage: 12DCV → UNV
- spec →
OPTICS EVO® batwing distribution provides a uniform, wide angled general illumination on horizontal and vertical surfaces to create smooth edges and an even layer of light without hot spots or
- category
- subcategory
- environment
- mounting
- CCT
- lens
- +1 more
- voltage: 12DCV → UNV
- spec →
UpScape 395 LED Large sized high lumen output solid brass accent/uplight with integrated LED. Includes frosted lens. Adjustable knuckle is locked with thumbscrew. Ground stake mounting is provided standard. Dual wire leads are factory-installed. Ideal for up lighting tall trees, structures and buildings while being mounted in a planter area. Not intended for downlighting or to be installed in turf areas or areas where there is foot traffic. Mounting / Installation Wire Lead: Dual 16AWG wire leads (option to daisy chain), first 25’, second 18”. Mounting: Slotted 8.5” large ground stake (standard) Material Housing: Solid cast brass. Knuckle: Solid cast brass, knob for angle adjustment. Shroud: Solid cast brass, with turn-to-lock fitting.
- category
- subcategory
- environment
- CCT
- lens
- spec →
Stand out Style. The Tantus Series keeps your design momentum by complimenting areas where recessed ceiling fixtures are not an option. Its sleek body and various functions keep this fixture timeless, yet its signature design and interchangeable magnetic louvers allow this fixture to make a bold statement. Fixture Details Incredibly versatile, the Tantus Lac is a multi-directional LED light fixture with unparalleled style and performance. With its interchangeable magnetic louvers, and the ability to both rotate and aim, the Tantus Lac truly delivers a brilliant shift in lighting.
- category
- subcategory
- environment
- CCT
- lens
- spec delta
- voltage: 12DCV → UNV
Choose any of the SPOTMOD® Tile accessories here to complete your installation.* <p><em>*Not Compatible with SPOTMOD Gimbal Recessed Fixture or SPOTMOD 12V Dimmable Fixture.</em></p>
- category
- subcategory
- environment
- voltage
- spec →
The Lumenbeam Inground Large Color Changing is a high-performance, ground-recessed LED projector that offers a choice of color mixing, as well as Le...
- category
- subcategory
- environment
- CCT
- lens
- spec delta
- voltage: 12DCV → UNV
The LEDIA LF series for recessed inground use transforms night environments into colorful settings- walkways and public spaces develop atmosphere and interiors inherit structure. Luminaire is available in four sizes. Specially coated tempered glass tiles diffuse light uniformly across the surface. Functional anti-slip squares applied to the surface also create interest by adding a unique three-dimensional effect to the tiles. The lens is bonded to the stainless steel luminaire housing providing a sealed enclosure. LEDIA mounts into a recessed stainless steel subframe, which serves as a cable vault for making power connections. Color-changing RGB LEDS require remote 12v DC LED driver and 3-channel dimmer or sequencer. Available Tile Sizes: 4" x 4" - LEDIA LF 04 RGB 8" x 8" - LEDIA LF 08 RGB 12" x 12" - LEDIA LF 12 RGB 16" x 16" - LEDIA LF 16 RGB
- category
- subcategory
- environment
- voltage
- spec →
The Echo Effect is a fully recessed exterior wall and step light. The plane wash half-frosted (PW) optic is designed for maximum main beam power and incredible...
- category
- subcategory
- environment
- CCT
- lens
- spec delta
- voltage: 12DCV → UNV
M1 miniature recessed series features quality and convenience with easy installation for indoor applications. Luminaires include four plastic downlight trims, three optics and 6" quick connect. Series is available in 2700K or 3000K and requires a 12VDC dimmable driver. Features No housing required Easy installation for remodel or new construction applications Field changeable optics (spot, flood and wide) Threaded LED module allows for field changeable trims Quick disconnect allows for extended lengths 5-year limited warranty Lumens / Wattage: 100lm / 2W Color Temperature: 2700K or 3000K Color Rendering Index: 90+ CRI Optics: Four Field Changeable Optics included with each (15° Spot, 45° Narrow Flood - installed, 60° Flood - frosted, 60° Flood - clear) Finish: Each fixture includes (2) black and (2) white trims in round and square Optional Trims: NM1-RSS: Round Stainless Steel Trim NM1-SSS: Square Stainless Steel Trim NM1-RSSD: Round Stainless Steel Indicator Trim NM1-RAIHEC: Round Hex Cell Stainless Steel Trim NM1-RLOUV: Round Louver Stainless Steel Trim NM1-RAEYELID: Round Scoop Trim Accessories: NM1-F: New Construction Frame-In Plate NM1-TM6: Splitter Cable (1 input - 6 output) NM1-WH6: Wire Harness System (1 input - 6 output) NM1-EXT: Extension Cables (6" to 240") Drivers: NM1-DVR12: 12V 12W Non-Dimmable Hardwire Driver NPSU-60W/12: 12V 60W Dimmable Hardwire Driver
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- spec →
Requires 12V AC transformer. Dimmable ELV, MLV or 0-10V depending on transformer used. IC Airtight for use with direct contact to insulation Height allows for use in ceilings with under 3" depth. Ceiling thickness can be reduced from fixture depth. Daisy chain up to 6 fixtures with E1LDRV60 38° Standard beam with optional 28° and 50° Remodel requires no frame. New construction E1LF1 frame available. Wet Location Rated for Indoor and Outdoor Use JA8-2016-E & UL listed. Life Span 50,000 Hours L70
- category
- subcategory
- environment
- mounting
- voltage
- CCT
The Boca Lighting and Controls InGrade is a rugged aluminum structure designed to protect various Boca Flasher products in underground applications.
- category
- subcategory
- environment
- spec →
1142-GB RGBW In-Grade, 26-inch drive-over linear RGBW in-grade with glass border, 3,088 lumens, tunable white (2200K to 6000K), DMX512, through-branch circuiting, IP68 housing, recessed ground lighting and wall washing.
- category
- subcategory
- environment
- spec delta
- voltage: 12DCV → 277V
- cct: 2700K → 2200K
- spec →
Engineered for versatility, this fixture can be recessed with adjustable hanger bars for different ceiling sizes or surface mounted to suit project needs.
- category
- subcategory
- environment
- spec delta
- cct: 2700K → 5000K
- spec →
Compact Fixture Housing One-Piece Extruded Aluminum Housing 0-10V Dimming to 1% Standard 112.5 Lumens per Watt at 90 CRI
- category
- subcategory
- environment
- spec delta
- voltage: 12DCV → UNV
- cct: 2700K → 3000K
- spec →
ADA compliant, seamless one piece laminated textile lens, open top and bottom for up and down light. ADA compliant with a durable extruded white textured polycarbonate or optional Amber Honey, Beige, or Opal Alabaster lens. BAA/BABA Complaint
- category
- subcategory
- environment
- mounting
- spec delta
- voltage: 12DCV → UNV
- cct: 2700K → 3000K
- spec →
The Corelite Class R6 small aperture linear LED luminaire is the ideal solution to numerous design requirements. Utilizing the Corelite engineered linear optical system the R6 delivers lumens both to the task surface yet maintains a soft luminous glow for high visual comfort. The low profile housing can be installed in most grid types including Armstrong Techzone™. The R6 is perfectly suited for open offices, corridors, perimeters, or any space with stringent design or energy requirements.
- category
- subcategory
- environment
- spec delta
- voltage: 12DCV → UNV
- cct: 2700K → 3000K
- spec →
MPR3 LED removes lighting elements from walls incorporating them into a multi-compartment recessed ceiling fixture. Sections provide independent task illumination; patient reading, patient ambient, and medical professional exam.
- category
- subcategory
- environment
- spec delta
- voltage: 12DCV → UNV
- cct: 2700K → 3500K
- spec →
The Distributed Low-Voltage Power System utilizes pre-terminated low-voltage lighting cables for safe, flexible LED lighting installations. Low-voltage lighting cables provide for fast, error free installation of LED light fixtures. Cables are available in pre-terminated lengths typical to application / fixture type for error free connectivity of Class 2 circuits in plenum rated applications.
- category
- subcategory
- environment
- mounting
- spec →
Enjoy all the benefits of connected lighting technology in a sleek, versatile surface mount luminaire. This fixture doesn't require a housing, making it an easy solution for replacing existing light fixtures with smart, energy-saving LED. The BLD4 Smart Surface Mount is easy to install on junction boxes (including pancake boxes). It comes with all that HALO Home has to offer: wireless ON/OFF, dimming to 5%, and white tuning (2700K-5000K) along with more advanced features like Groups, Scenes, and Schedules. Install the free app on a smartphone/tablet to pair and wirelessly control these lights via secure Bluetooth connection. While compatible with standard ON/OFF switches, install HALO Home Controllers for optimal performance. Controllers provide HALO Home Smart Lights with constant power allowing them to strengthen and extend a HALO Home network by repeating and responding to wireless messages from any Controller, smartphone, or voice assistants* like Amazon Alexa or Hey, Google. White: BLD4089BLE40AWH
- category
- subcategory
- environment
- mounting
- CCT
- spec delta
- voltage: 12DCV → 120V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →