Outdoor/Wet Location LED Stomp Strip 24VDC, Tunable White
Our Wet Location Stomp Strip is a versatile, high-performance lighting solution built for durability in outdoor environments. Featuring a 0.5" wide flat lens, the fixture is available in black or white body options with a clear or diffused UV-resistant silicone lens for high output or reduced pixelation. Offered with Tunable White Technology 2000k-6500K ( 2K6K ) and 2700K-6500K ( 27K6 ), granting independent control over LED color temperature and brightness to support circadian lighting, enhancing well-being by aligning with natural daylight cycles. Designed for surface or flush mounting, the flexible design delivers superior color rendering, uniform illumination, and high efficiency without compromising durability. The optically clear or diffused silicone coating prevents fading over time, ensuring long-term performance and reliability.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
SD 6” LED Wall Wash. Aperture Size : 6 in; Application : Wall Wash; Construction Type : New Construction; Family : SD; Intellect : Enabled; Light Source : LED; Listings : Damp Location; Lumen Output : 501-1000,1001-1500,1501-2000
- category
- environment
- CCT
- CRI
- beam angle
- dimming
- +1 more
- voltage: 24DCV → 120V
- spec →
Kelvix Endurawave is the next evolution in outdoor flex neon—durable, versatile, and engineered for performance. Your project, connected.
- category
- environment
- CCT
- CRI
- beam angle
- dimming
- spec →
Only for use with 24V DC Koto Module IC Airtight for direct contact with insulation. Simple installation with 24V Wire Meets Title 24 Requirements. ENERGY STAR® Certified. Trims and module sold separately.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- spec →
1.9W/ft surface mount, dome profile LED Neon. Designed specifically for use in high ambient temperature applications such as wet or dry saunas.
- category
- environment
- voltage
- CCT
- dimming
- spec →
The LNE-15 Dual Bend is a versatile, high-performance LED fixture designed as an affordable neon replacement. Engineered for flexibility, it bends both horizontally and vertically around tight curves without damage. Providing up to 16 feet of continuous illumination, it’s perfect for indoor and outdoor applications that require a sleek, seamless lighting solution. 27K 30K 35K 40K 50K QUICK SPECFEATURESDIMENSIONSDOWNLOADS OPERATING VOLTAGE POWER CONSUMPTION LUMEN OUTPUT DIMMING MAXIMUM RUN LENGTH CUT INTERVALS OPERATING TEMPERATURE BEAM ANGLE RATING CERTIFICATIONS LUMEN MAINTENANCE 24V DC Up to 2.5W per Ft. Up to 210 Lumens per Ft. MLV, ELV, 0-10V and TRIAC 16 Ft. Every 3.94 in. (100mm) -4°F (-20°C) to 113°F (45°C) 120° IP67 UL Listed 50,000 Hrs. Key Features: This product is factory-cut only. Do not field modify. ⬇️ SPECIFICATION SHEET ⬇️ IES (ZIP)
- category
- environment
- voltage
- CCT
- dimming
- spec →
Bara Grid is a linear luminaire designed for architectural surface and millwork applications where clean lines and visual comfort are essential. It is available with High Efficacy static white LEDs optimized for long runs and best-in-class efficacy, Vibrant Color static white LEDs with maximum 72 LEDs per foot for exceptional color quality and no visible dotting. The fixture delivers dot-free, even illumination with a frosted lens and supports linked runs for continuous lines of light. Additional highlights include 24VDC Class 2 fixtures made to order up to 144”. Fixtures can be linked up to 90’ depending on output, Suitable for undercabinet, surface mount, and direct view applications, Approved for closet/storage space installation per NEC 410.16(A) (3) and 410.16(C)(5) on outputs 5.7 W/ft or less. Proudly assembled in the USA. This fixture is BAA and BABA compliant.
- category
- environment
- voltage
- beam angle
- dimming
- spec delta
- cct: 2700/6500K → 2200K
Cost-effective static color or white for long decorative runs.
- category
- environment
- voltage
- CCT
- spec →
EDGE is a flexible linear system with side emitting LEDs that allow the product to disperse light in the opposite direction of a typical MODA LIGHT flexible linear products. This product is commonly use for applications such as circular coves or awkward contouring lines. MODA LIGHT's flexible linear products come with a high quality copper thermal management system that runs through the FPCB for longer life and healthy ambient operating temperatures. EDGE uses the latest in high powered side emitting LEDs and is a great compliment for dry location installations.
- category
- environment
- voltage
- CCT
- CRI
- dimming
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps PureEdge Lighting
Full directory →51 rep agencies carry the PureEdge Lighting line across 50 states. Pick your state.
Alabama AL2 agencies
- Lighting SolutionsCooper (Eaton)
Birmingham
- SESCO LightingSignify (Philips)
Mobile
Alaska AK1 agency
- Alaska Architectural LightingAcuity Brands
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
Statewide
California CA5 agencies
- sixteen5hundredAcuity Brands
San Francisco
- SDLAAcuity Brands
San Diego
- Mar Vista SalesAcuity Brands
Ventura
- C.B.C. LightingAcuity Brands
Fresno
- Performance Lighting SystemsAcuity Brands
Los Angeles
Colorado CO1 agency
- Fisher Lighting And ControlsCurrent
Statewide
Connecticut CT1 agency
- Apex Lighting SolutionsSignify (Philips)
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
- Federated LightingAcuity Brands
Statewide
Florida FL2 agencies
- Lighting DynamicsCooper (Eaton)
Miami
- SESCO LightingSignify (Philips)
Fort Myers · Jacksonville · Orlando · Panhandle · Tampa
+40 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.