PSBCED10-BATTERY-PACK
Versatility, peace of mind, ease of installation and use are the hallmarks of the Power Sentry emergency lighting solutions. The optional Power Sentry® PSBCED10 module enables Power Sentry PS1030 and
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
AtLite UL924 and NYC code compliant LED emergency light available with two or three 80 lumen heads
- category
- environment
- voltage
- spec →
The Emergency Lighting Micro/Mini Inverters are a perfect fit in a distributed emergency lighting systems where emergency LED drivers cannot be used, such as with Type B TLEDs, integral-base lamps, or luminaires with drivers integral to the LED array (e.g. flat panels or UFO high-bays). Remote mounting up to 250 feet.
- category
- environment
- voltage
- spec →
Myers EPS offers a line of micro inverters for emergency lighting. The Illuminator Series LVU systems fits many compact applications.
- category
- environment
- voltage
- spec →
Universal New Construction Downlight. Product Category : 4-Inch Downlight; Product Type : Downlight; Product Shape : Round; Housing : New Construction; Environment : Damp Location; Compliance : ENERGY STAR® Certified,Certified to UL924 Standard for Emergency Lighting; Correlated Color Temperature : 2700K,3000K,3500K,4000K; Color Rendering Index : 80-89,90-100
- category
- environment
- voltage
- spec →
A surface mount enclosure with an emergency LED driver for use with 6" ELO and ELO+ luminaires. It adds 1-1/2" height to the luminaire and matches the finish. Driver’s circuitry automatically switches the luminaire between emergency and normal power operation during power loss and restoration. Operates at a reduced level for a minimum of 90 minutes to allow safe egress during power outage. Upon restoration to normal AC operation, the emergency driver returns to charging mode. FEATURES Compatible with 6" ELO & ELO+ Matching decorative enclosure also available Listed for field installation - UL 924 and CSA C2.22 No 141 Includes integral test switch ELECTRICAL Input Voltage: 120VAC, 50/60Hz Output Voltage: 123/131VDC Wattage: 3W Illumination Time: 90 minutes OPERATION When AC power fails, the driver immediately switches to the emergency mode, operating the LEDs at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency driver automatically returns to the charging mode. BATTERY Ternary lithium-ion battery requires 24 hours to recharge. COMPATIBLE LUMINAIRES NELO-6RTWMPW: 6" ELO with Selectable CCT, 1050lm / 15W, 90+ CRI (use NELO-6RW to match finish) NELOCAC-6RP: 6" ELO+ with Dedicated CCT, 700lm / 12W, 90+ CRI MATCHING DECORATIVE ENCLOSURE NSEM-6ND: Decorative Enclosure without Emergency Driver
- category
- environment
- voltage
- spec →
This 8 watt nickel-cadmium (NiCd) battery backup system is designed for use with the Edge Round 8'' flush mount (sold separately). It provides 90 minutes of power to the Edge Round 8'' flush mount to allow lighting for emergency egress or continuation of key operations during a loss of power.
- category
- environment
- voltage
- spec →
DMX Lighting Control Panel with Remote Control Breakers Looking for an efficient lighting control load center? The LCLC series of DMX controlled Load Centers uses motorized circuit breakers to offer a labor-saving one-panel alternative to DMX relay panels. Instead of a bulky setup with separate panels for different audio, visual, and lighting systems, a high quality LynTec lighting power control panel can solve your space issues. The economical Load Center panels require the least wall space for tight locations and are perfect if you are trying to save on valuable room. These compact and sleek panels are available in 26 and 41 circuit sizes od 3 phase, 4 wire 208Y/120Vac. Many small theaters, intimate restaurants, conference rooms, and other locations have found these incredibly useful. A Lighting Control Load Center is a traditional residential panel and consequently best suited for smaller circuit breaker counts or for applications with limited wall space. For a bigger arena, auditorium, or other venue, one of LynTec’s many other state of the art products would be more appropriate. The LCLC is more economical than the bigger panelboards, and is a great value for all of the features offered! Here are just a few of the high end features of this lighting power control: DMX 512 control standard in all panels, a simple jumper system sets your addressing Control circuits individually or in zoned group Simplest control set-up and operation in the industry No on-site commissioning or factory start-up required Emergency auto-on feature for egress lighting standard (ETL listed UL 924) Saves Space Saves redundant installation and hardware costs! Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long! Many of these features make sure that your Lighting Control Load Center is convenient and easy to use, from the limited space it take up to the ability to have zone control. Save time, money, and space with the LCLC.
- category
- environment
- voltage
- spec →
The PARAFLEX PFX‑5541 is a decorative LED emergency lighting unit with universal 120–277V input, four 1.0‑watt LED heads, and a 90‑minute minimum runtime. It features a maintenance‑free NiMH battery, 5VA flame‑retardant thermoplastic housing, and is UL listed for damp locations. An optional self‑diagnostic feature is available.
- category
- environment
- voltage
- spec delta
- voltage: 120V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Power Sentry
Full directory →60 rep agencies carry the Acuity Brands line across 51 states. Pick your state.
Alabama AL1 agency
- AMA LightingAcuity Brands
Birmingham · Mobile
Alaska AK1 agency
- Alaska Architectural LightingAcuity Brands
Statewide
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
- Long Sales AgencyAcuity Brands
Statewide
California CA6 agencies
- sixteen5hundredAcuity Brands
San Francisco
- SDLAAcuity Brands
San Diego
- C.J.S. LightingAcuity Brands
Sacramento
- Mar Vista SalesAcuity Brands
Ventura
- C.B.C. LightingAcuity Brands
Fresno
- All 6 in the CA directory →
Colorado CO1 agency
- The Lighting AgencyAcuity Brands
Statewide
Connecticut CT1 agency
- Lighting AffiliatesAcuity Brands
Statewide
Delaware DE1 agency
- Illuminations Inc.Acuity Brands
Statewide
District of Columbia DC1 agency
- Federated LightingAcuity Brands
Statewide
Florida FL5 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Envision Lighting SystemsAcuity Brands
Fort Myers · Tampa
- AMA LightingAcuity Brands
Panhandle
- LandrethAcuity Brands
Orlando
- Arch. Sales & IlluminationAcuity Brands
Jacksonville
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.