HA3MR
Low voltage 3-1/2 inch adjustable designed for flat or sloped ceilings provides maximum light output without flashback. Designed for low voltage MR16 or LED MR16 lamps. Lockable 361° rotation and 45° tilt with center beam optics provides full output without flash back.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Atlas offers a full line of and brackets and accessories to complete your lighting job. We apply the same quality and durability standards to our accessories as we do our lighting products.
- category
- subcategory
- environment
- voltage
- spec →
Modern look, performance, appeal, controls, scalability, and mounting options to boost the atmosphere.
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 10W → 60W
- spec →
The Regrazer is a small cove grazer that grazes surfaces up to 40’ height. The inner geometry along with using latest CSP chip technology and glare-reducing optics make this fixture outstanding in both performance and glare protection. Can be mounted directly to ceilings or by using the bracket accessory for wall mounting. More
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 10W → 960W
- spec →
Tivoli's FLEXILE LG System is a 360° bendable lighted surface without any shadowing. A 1.25″ bend radius with a 0.98″ diameter allows for curved applications with UV stabilized, food-grade environmental silicone housing. Multiple mounting options from a rigid telescoping bracket
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 10W → 96W
MODA COVE Interior is a new patent pending cove lighting system designed for interior applications. Utilizing MODA’s latest software and dimming technology with its onboard dimming chipset and MODA firmware, this series can dim to 0% smoothly without any flicker or noise and simultaneously synchronize dim with every fixture. Choose between Electronic Low Voltage dimming models. 0-10V dimming fixtures by combining a MODA BRIDGE with our ELV fixtures. Or direct DALI dimming fixtures (No Bridge or adapter required), all with no minimum run lengths. With MODA’s methods of precision and high standards of work, MODA achieves perfect illumination. Color Rendering Index is at a MODA standard of 90-98. R1 - R15 values are in excess of 90. No striations, no color over angle, and no dark spots. Small in physical size, yet powerful with up to 1200 lm/ft. Standard color temperatures available are 2200K, 2700K, 3000K, 3500K, and 4000K. Other CCT are available by request. 100-277V, 50/60Hz power input allows these fixtures to be installed anywhere in the world. New patent pending locking bracket rotates 180 degrees for a multitude of light directions. Rugged aluminum design. Fast installation is achieved with MODA KWIK CONNECT plugs and install-integral thumb latch connectors. Choice of five lumen packages ranging from 300 lm/ft to 1200 lm/ft. Available in 1ft & 4ft sections. Series is designed for driver or light engine to be factory replaced at its end of life or recycled. Designed and developed in Las Vegas, USA by MODA.
- category
- subcategory
- environment
- voltage
- spec →Signal-Tech53309 (Str1818 Rw A049/120 277 Vac) R3 1 No Right Turn Symbol (120 277 Vac) Led Signstrong
This STR Series R3-1 NO RIGHT TURN SYMBOL outdoor, highway-grade blank-out sign is designed with a NEMA 3R cabinet, super bright LEDs and a contrasting face; guaranteed readable in direct sunlight. The sign message is formed by strategically placed visible LEDs on a black sign face and is designed to illuminate the message or messages when turned on and blank-out or extinguish the message when off.It is engineered with a solid-state circuit board and switch-mode power supply for maximum LED life. It has a corrosion resistant, reinforced all-weather cabinet and a robust back that is ideal for span wire and mast arm mounting. Each sign ships with 0.125" aluminum Lift'N Shift back for wall mounting. Standard cabinet finish is Black; custom paint finishes are available. Sign can be controlled by a switch, Signal-Tech Sign Control Software or third-party relay. Control switch and software can be purchased separately. UL/cUL Listed for wet locations.
- category
- subcategory
- environment
- voltage
Consisting of two versions V2 and Flex. Flex has tilting ability from 0 to 30 degrees. Made of extruded aluminum, accommodating one or two modules with up to 48 LED protected by tempered screen-printed glass. Available with one or two lights, wall or pole mounted, and different height combinations
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → 120-277V/347-480V
- spec →
The Cutlass Series of high output LED luminaires are designed for new outdoor parking area lighting and to be a replacement for HID area lights. They are optimal for lighting applications where long life, low maintenance, and consistent color rendering is required. The high efficient/lumen output allows the fixture to be used for parking, restaurant, quick service, shopping centers, or general area lighting applications.
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 10W → 476W
- spec →
The LITELUME™ LED Strip Elite (LL-STRE) is a surface or suspended mounted luminaire designed for retrofit or new construction. Available in 4’ and 8’ sections, capable of continuous runs with optional joiner bracket.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- wattage: 10W → 1W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Portfolio
Full directory →43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
- Malmstrom White Co.Cooper (Eaton)
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco · Ventura
Los Angeles · San Diego
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
- Lighting DynamicsCooper (Eaton)
Fort Myers · Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.