H7493T
4-1/2 inch low voltage adjustable accent fixture for vertical lighting in sloped ceilings or accent lighting. Optics allow the lamp axis to pivot through the center of the aperture at the ceiling line, providing maximum light output with no flashback. Offered with low wattage transformer for use with LED lamps or 75W transformer for use with low voltage lamps.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Atlas offers a full line of and brackets and accessories to complete your lighting job. We apply the same quality and durability standards to our accessories as we do our lighting products.
- category
- subcategory
- environment
- voltage
- spec →
Perfectly complementing the AI3 series, Williams AIW supplies indirect wall illumination. Offered in 4' and 8' lengths, choice of perforation, slots, or solid bottom, AIW is perfect for perimeter lighting in hallways, conference rooms, or over hospital beds.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- spec →
Wall3™ Wall Bracket - W3B
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → UNV
- spec →
The Regrazer is a small cove grazer that grazes surfaces up to 40’ height. The inner geometry along with using latest CSP chip technology and glare-reducing optics make this fixture outstanding in both performance and glare protection. Can be mounted directly to ceilings or by using the bracket accessory for wall mounting. More
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 13W → 960W
- spec →
Tivoli's FLEXILE LG System is a 360° bendable lighted surface without any shadowing. A 1.25″ bend radius with a 0.98″ diameter allows for curved applications with UV stabilized, food-grade environmental silicone housing. Multiple mounting options from a rigid telescoping bracket
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 13W → 96W
- spec →
Architectural acrylic edge-lit sign for applications requiring low-profile, yet decorative appearance. Uses included, but are not limited to museums, galleries, office building lobbies, etc. Incorporates 25+ year LED source. Red letters are 8" high and 3/4" thick to comply with NY requirements. Mounting Mounting hardware consist of 0.06 steel universal junction box bracket, 7/8" profile 0.11 die-cast aluminum bracket cover, screws, wire nuts, and silver-finished plastic plugs that are used to eliminate remaining knocouts once mounting configuration is selected. ELECTRICAL Voltage Input: Dual 120V/277V (0.038A / 0.017A) Wattage: 3 Watts normal / 5 Watts emergency operation Light Source: Long life LED sources Testing: High charge / ready operation indicator light with test button and automatic reset Circuit Protection: Isolated surge / short circuit protection (Disconnect for deep discharge) Life Expectancy: 25 Years with no change in illumination level. 5 year warranty on materials and worksmanship. Battery (NX-822-LED) Replaceable Ni-Cad battery (NED-NICAD) 90 minute emergency operation Optional Accessories NEXC-R: Replacement Red Chevrons Labels and Listings UL Listed NEC NFPA State & Municipal 5 Year Warranty on materials and worksmanship Meets City of New York emergency code requirements (NY Approved) Certified to the energy efficiency standards of California Title 20
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120V/277V
- wattage: 13W → 3.5W
MODA COVE Interior is a new patent pending cove lighting system designed for interior applications. Utilizing MODA’s latest software and dimming technology with its onboard dimming chipset and MODA firmware, this series can dim to 0% smoothly without any flicker or noise and simultaneously synchronize dim with every fixture. Choose between Electronic Low Voltage dimming models. 0-10V dimming fixtures by combining a MODA BRIDGE with our ELV fixtures. Or direct DALI dimming fixtures (No Bridge or adapter required), all with no minimum run lengths. With MODA’s methods of precision and high standards of work, MODA achieves perfect illumination. Color Rendering Index is at a MODA standard of 90-98. R1 - R15 values are in excess of 90. No striations, no color over angle, and no dark spots. Small in physical size, yet powerful with up to 1200 lm/ft. Standard color temperatures available are 2200K, 2700K, 3000K, 3500K, and 4000K. Other CCT are available by request. 100-277V, 50/60Hz power input allows these fixtures to be installed anywhere in the world. New patent pending locking bracket rotates 180 degrees for a multitude of light directions. Rugged aluminum design. Fast installation is achieved with MODA KWIK CONNECT plugs and install-integral thumb latch connectors. Choice of five lumen packages ranging from 300 lm/ft to 1200 lm/ft. Available in 1ft & 4ft sections. Series is designed for driver or light engine to be factory replaced at its end of life or recycled. Designed and developed in Las Vegas, USA by MODA.
- category
- subcategory
- environment
- voltage
- spec →
2¾” X 4¼” SOFT CORNER WALL BRACKET/CEILING BUY AMERICA COMPLIANT The Series 1260 is a soft corner wall or ceiling mount fixture ideal for basic applications where general illumination is needed over cabinets, mirrors, vanities, in display cases, dressing rooms, bathrooms, kitchens, coves, corridors, hallways and stairwells. A die formed steel housing along with a one piece heavy gauge precision extruded smooth white acrylic plastic insure a tight fit while minimizes dust accumulation inside of fixture. Several lumen packages and color temperatures are available to suit any need. A version with an Energy Star LED light engine is available.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V → 120-277V
- spec →
19C-21C-6
- category
- subcategory
- environment
- voltage
- spec delta
- wattage: 13W → 68W
- spec →
Premium pre-assembled lighting contactor panel with astronomical timeclock, 2–24 poles, NEMA 1 or NEMA 3R, 120/277V. Plug-and-play. UL 508A certified.
- category
- subcategory
- environment
- voltage
- wattage
- spec delta
- voltage: 277V → 120/277V
- spec →
25 Year design life. Style 75 Features a A356 Alloy Sand Cast Aluminum, Four Bolt Base. An Extra Large Access Cover is Included. A Grounding Lug is Also Provided.
- category
- subcategory
- environment
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Portfolio
Full directory →43 rep agencies carry the Cooper Lighting Solutions line across 51 states. Pick your state.
Alabama AL1 agency
- Lighting SolutionsCooper (Eaton)
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- Illumination Systems ArizonaCooper (Eaton)
Statewide
Arkansas AR1 agency
- Malmstrom White Co.Cooper (Eaton)
Statewide
California CA2 agencies
- CAL LightingCooper (Eaton)
Fresno · Sacramento · San Francisco · Ventura
Los Angeles · San Diego
Colorado CO1 agency
- Illumination SystemsCooper (Eaton)
Statewide
Connecticut CT1 agency
- Reflex Lighting GroupCooper (Eaton)
Statewide
Delaware DE1 agency
- Lighting SolutionsCooper (Eaton)
Statewide
District of Columbia DC1 agency
- Chesapeake LightingCooper (Eaton)
Statewide
Florida FL5 agencies
- Ardd + WinterCooper (Eaton)
Jacksonville
- Lighting DynamicsCooper (Eaton)
Fort Myers · Miami
- Lighting SolutionsCooper (Eaton)
Panhandle
- Lighting Partners of Central FloridaCooper (Eaton)
Orlando
- Tampa Bay LightingCooper (Eaton)
Tampa
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.