PFB-37002-EX
CID2 LED FAA L-864 & ICAO medium intensity Types B & C Hazardous area for refineries, process plant & offshore marine sites
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The rugged, one-piece die-cast aluminum housing features a complete heat sink hat optimizes heat dissipation through convection cooling management. Low profile, 3G vibration rated compact design minimizes wind load requirements. Housing is completely sealed against moisture and environmental contaminants.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
The Dakota series is best described as a heavily constructed outdoor fixture with its bold lines which are sure to make a statement. ADA compliant with a durable extruded white textured polycarbonate or optional Amber Honey, Beige, or Opal Alabaster lens. BAA/BABA Complaint
- category
- environment
- voltage
- spec delta
- wattage: 422W → 10W
- spec →
Bold 3” width profile ring luminaire with clean design, customizable output, finishes, mounting, and 90CRI LED illumination.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → UNV
- spec →
Linear Dimming Control Module Plenum Rated (LDCM-PL) takes a 0-10V dimming signal and converts it to an ELV dimmed output for up to 1000W with a 277V load and 450W on a 120V load. The LDCM-PL is rated to directly mount to a junction box in a plenum space for easier installations and to meet building requirements.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → 277V/120V
- spec →
The Halo H47T is designed for sloped ceiling installations for ceilings from 2/12 to 6/12 pitch. The socket aiming mechanism allows the lamp to be aimed straight down in accordance with of ceiling pitch (2/12 to 6/12). For use in non-insulated ceilings. If ceiling insulation is present, it must be kept 3 inches from all sides of housing.
- category
- environment
- voltage
- spec →
A 4" square aperture specification grade modular housing platform designed for tungsten-halogen MR16. Suitable for 2x8 residential framing or commercial installations. The platform is airtight to prevent energy loss, room drafts, dust marks on the ceilings and reduce sound transmission. Units may be used in direct contact with insulation and building products. A complete fixture requires three components; a P408ICAT housing platform, a 4" lamp module and optical element. Modules and elements may be changed after installation from below the ceiling to provide a variety of lamp sources and optical distributions. The P4MRICAT housing comes with the MA4MR low voltage MR16 directional lamp module factory installed to reduce installation time but retain the flexibility of the modular platforms.
- category
- environment
- voltage
- spec delta
- wattage: 422W → 50W
- spec →
LSF Selectable Flood Series
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → 120-347V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →