Cubra 3 Alternating Joint
Does your design require a uniform, balanced plane, but with both direct and indirect lines of light? CUBRA 3’s alternating joint (CU3AJ) allows designers to create direct and indirect lines and patterns while maintaining a perfectly level horizon. CUBRA 3 is just 3/4” high and 6” wide with a 3” aperture, and at a mere 3/16”, the joiners practically vanish into the lines of light. Don’t let the size fool you! CUBRA 3 is small but mighty and delivers the performance you need. To compliment your design consider incorporating CUBRA 1, also at the impossibly thin 3/4” height but featuring a 1” aperture in a 3” wide fixture. Both the CUBRA 1 and CUBRA 3 offer four 90-degree architecturally interesting connectors to keep your patterns flowing throughout your space. More Details Ultra-Slim ¾” profile 6”, extruded aluminum housing with 3” aperture Direct illuminated luminaire utilizes light guide plate (LGP) for high optical efficiency Batwing and Lambertian optics deliver quality light while maintaining visual continuity Up to 1000 lumens per ft and up to 128 LPW Up to 18 ft on center spacing with batwing optic and 14 ft with lambertian Design patterns with non-illuminated connectors Sele
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Catenary systems are an excellent solution to illuminate plazas, passageways, and pedestrian zones. The cable hanger system of the luminaires is suitable for transverse suspension systems and longitudinal chain systems.
- category
- environment
- voltage
- lumens
- CRI
- wattage
- +2 more
- cct: 2700K → 4000K
- spec →
The sleek, sculpted aesthetic of the Juno® T265L HTEK Conix® II LED fixture is unrivalled in the industry and offers a fresh, contemporary appeal. These Conix II LED fixtures feature integral
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- spec →
Wet Location Luminaire. Aperture Size : 3" (3.00"); Construction Type : Aluminum; Environment : Outdoor; Light Source : LED; Listings : Damp Location,Wet Location; Lumen Output : Standard (SLO),High (HLO),Custom (CLO); Mounting : Wall Mount,Ceiling Mount; Product Shape : Rectangle,Tear Drop
- category
- environment
- voltage
- lumens
- CCT
- wattage
- +2 more
- spec →
VIA 1.5 ACOUSTIX
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +1 more
- spec →
Archiline PRO Wall
- category
- environment
- voltage
- lumens
- CCT
- CRI
- +2 more
- wattage: 34.5W → 89W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Pinnacle Architectural Lighting
Full directory →47 rep agencies carry the Pinnacle Architectural Lighting line across 51 states. Pick your state.
Alabama AL1 agency
- AMA LightingAcuity Brands
Birmingham · Mobile
Alaska AK1 agency
- SeaTac Lighting & ControlsCooper (Eaton)
Statewide
Arizona AZ1 agency
- R.C. LurieAcuity Brands
Statewide
Arkansas AR1 agency
Statewide
California CA5 agencies
- sixteen5hundredAcuity Brands
San Francisco
- SDLAAcuity Brands
San Diego
- C.J.S. LightingAcuity Brands
Sacramento
- C.B.C. LightingAcuity Brands
Fresno
- Performance Lighting SystemsAcuity Brands
Los Angeles · Ventura
Colorado CO1 agency
- The MH CompaniesCurrent
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
- DiversifiedCurrent
Statewide
District of Columbia DC1 agency
- Lighting EnvironmentsSignify (Philips)
Statewide
Florida FL5 agencies
- Power & Lighting SystemsAcuity Brands
Miami
- Envision Lighting SystemsAcuity Brands
Fort Myers · Tampa
- AMA LightingAcuity Brands
Panhandle
- LandrethAcuity Brands
Orlando
- Arch. Sales & IlluminationAcuity Brands
Jacksonville
+41 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.