929001823804
CorePro, LEDtube, T5, 35-7/16 inch, 11 W, 5000 K, 1500 lm, 50000 hour(s), 136.00 lm/W, G5, Glass
Cross-References
Top equivalents — 12 across 10 brands
Compare top 3 →- spec →
Long-lasting, energy-efficient LED step lights provide illumination for safety around steps, balcony areas, or walkways. Each step light includes five color temperatures, allowing the end user to decide the desired appearance. Durable cast zinc-magnesium face plates available in three finishes to match almost any decor. Efficient LED light sources are low-maintenance, offer 50,000-hour lamp life, and save over 80% in running costs compared to 18W incandescent step lights. Input Voltage: 120-277V Lumens / Wattage: 144lm / 4.6W Color Temperature: Selectable CCT (1800K / 2700K / 3000K / 4000K / 5000K) Dimming: Triac or ELV Housing: NSW-800 required
- category
- environment
- CCT
- wattage
- spec →
Suitable for hard wire installation into a 3 1/2" Round or 3 1/2" Octagon junction box. Housing meets restricted air flow requirement (per ASTM E-283). CA Title 24 compliant (JA8-2016). Meets ENERGY STAR requirements. cULus Listed for N and BZ finishes. cETLus Listed for W finish. Warranty: 5 years limited.
- category
- environment
- CCT
- wattage
- spec →
Cylindrical tube and base design. White diffuser. Five color adjustable CCT switch. Vertical or horizontal mounting. Available in three lengths and two finishes.
- category
- environment
- CCT
- wattage
- spec →
Designed to create a complete UL-listed fixture by the most economical means, MaxLite offers the lamp ready series as a companion to our internal driver LED L...
- category
- environment
- CCT
- spec →
The DUALdrive 20W linear family by eldoLED has DALI-2 DT8(Tc) certified drivers. These drivers contain two separate inputs and LED outputs that are controlled via DALI or LEDcode. Making it ideal for
- category
- environment
- CCT
- spec delta
- wattage: 11W → 20W
- spec →
GENERATION 3 LED COLOR SELECTABLE STRIP - ADA The LED Strip Generation 3 is designed to imitate the look of a traditional T5/T8 double fluorescent strip with the energy savings expected from its LED source. The units are color selectable between 3500°K, 4000°K and 5000°K and available in 2’, 4’ and 8’ units with a standard 120-277V, 0-10v dimmable driver. Each unit is linkable in the field to reduce installation costs. This "Value Series" unit is a cost-effective solution for any project.
- category
- environment
- CCT
- spec delta
- wattage: 11W → 80W
- spec →
An even, continuous, tubular, architectural light source with a minimal profile, providing evenly diffused light from a single LED source at the top of the tube. Perfectly designed for spaces requiring diffused light that provides soft and even illumination on walls, ceilings, and work surfaces. The minimalist size of the profile creates visual interest without overwhelming a space. Subtle illuminated joints maintain the continuous look with minimal distraction. The customizable HPC Solo system provides many configurations to fit any space including standard configurations for straight, curved, or welded continuous runs, as well a free form design possibilities with horizontal and vertical change of direction possible. All illuminated in our slimmest 2” dia. profile, HPC Solo will ensure your space feels considered and beautiful. HPC Solo Curve comes standard in various radius and segment combinations for horizontal change of direction. For vertical curving or ceiling-to-wall transitions, please use the HPC Solo FreeForm.
- category
- environment
- CCT
- spec delta
- wattage: 11W → 96W
- spec →
The 4243 Low Voltage Step & Marker is designed for efficient illumination with an eyelid cover plate, constructed from durable A360 die-cast aluminum and finished in 18 colors. It features a frosted, shock and heat resistant glass lens and comes with a 1.1W, T3 LED lamp (unless specified otherwise) for consistent lighting. Includes an easy-to-install surface mounting plate.
- category
- environment
- CCT
- spec delta
- wattage: 11W → 5W
- spec →
The LSSR2 is the ultimate flexible strip retrofit with lumen output and color temperature selection at the point of installation. A cost-effective solution to retrofit existing T8/T12 fluorescent strips to LED technology.
- category
- environment
- CCT
- spec delta
- wattage: 11W → 75W
- spec →
Designed to fit into decorative exterior fixtures, these easily install into existing mogul based HID sockets for significantly improved lighting and life, as well as significant energy savings.
- category
- environment
- CCT
- spec →
Long-lasting, energy-efficient LED step lights provide illumination for safety around steps, balcony areas, or walkways. Each step light includes five color temperatures, allowing the end user to decide the desired appearance. Durable cast zinc-magnesium face plates available in three finishes to match almost any decor. Efficient LED light sources are low-maintenance, offer 50,000-hour lamp life, and save over 80% in running costs compared to 18W incandescent step lights. Input Voltage: 120-277V Lumens / Wattage: 166lm / 4.6W Color Temperature: Selectable CCT (1800K / 2700K / 3000K / 4000K / 5000K) Dimming: Triac or ELV Housing: NSW-800 required
- category
- environment
- CCT
- wattage
- spec →
Switch from a 2700K to 5000K by using manual switch on driver Soft white lens provides smooth lumen distribution Deep set LED trim reduces glare while providing area illumination Medium base to quick connect adapter included (PSA30) Energy Star Certified Title 24 JA8-2019 Compliant Life span of 50,000 hours L70
- category
- environment
- CCT
- wattage
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →