929001823304
CorePro, LEDtube, T5, 23-5/8 inch, 8 W, 4000 K, 1050 lm, 50000 hour(s), 131.00 lm/W, G5, Glass
Cross-References
30 equivalents across 20 brands
Compare top 3 →- spec →
Our LuxTube LED Lighting System offers a wide variety of LED types, including 2700K, 3000K, 3500K, 4000K, tunable white, RGB, RGBW and Pixel, allowing for both simple and complex design possibilities. Our system is suitable for both indoor and outdoor installations and for complex designs we require 3D CAD files to ensure we can meet the expectations of lighting designers, architects, interior designers and engineers. With the LuxTube LED Lighting System, you can be sure you're getting superior illumination results.
- category
- environment
- CCT
- wattage
- spec →
LEDUR TW allows the end user to select between three different CCT at any time with a three-position switch. The edge-lit placement of the LEDs provides smooth uniform light across the counter surface, eliminating hot spot reflections in granite and other surfaces normally generated by traditional LED under cabinets. LEDUR TW features easy installation with captive screws under removable caps. Completely dimmable and linkable, the LEDUR TW is a perfect solution for energy efficient lighting to replace halogen or fluorescent under cabinets offering the dimming flexibility of halogen or xenon and the even light distribution, cool operation and energy efficiency of fluorescents. FEATURES Built-in on/off rocker switch and 3 positions sliding color temperature switch Edge lit design eliminates LED diode image Linkable up to 400 Watts fixtures 3 wire grounded electrical port on both ends for power or linking Captive Screws for easy mounting Input Voltage: 120V Lumens / Wattage: 475lm per foot / 4.9W Color Temperature: 3 Selectable CCT (2700K / 3000K / 3500K) or (3000K / 4000K / 5000K) Color Rendering Index: 90+ CRI Dimming: Triac or ELV Length: 8" Finish: Bronze
- category
- environment
- CCT
- wattage
- spec →
Switch from a 2700K to 5000K by using manual switch on driver Soft white lens provides smooth lumen distribution Medium base to quick connect adapter included (PSA30) cUL listed for wet locations Title 24 JA8-2019 Compliant Dimmable Triac/ELV
- category
- environment
- CCT
- wattage
- spec →
Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. The Origin lineup of Wall Lights offers a range of lumen packages and housing sizes to meet a variety of different applications. The housings retain a traditional design that closely resembles older HID fixtures. This allows the customer to upgrade to LED gradually if needed, and reduces the additional work required, such as painting or repairing the wall.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 15W
- spec →
RLFHE is intended to retrofit existing fluorescent FHE product. Ideal for use in cold-storage, food-processing, manufacturing, industrial, gymnasium and exterior retail environments. Fiberglass
- category
- environment
- CCT
- spec →
Eclipse Curve Mono-Point Luminaire. Color Rendering Index : 90-100; Correlated Color Temperature : 2700K,3000K,3500K,4000K; Driver Orientation : Integrated; Light Distribution Detail : Spot,Medium,Flood,Wide Flood; Mounting Type : Mono-Point; Lumen Output : 501-1000,1001-1500,1501-2000,2001-3000,3001-4000; Listings : cETLus for Dry Locations,Title 24 Part 6 JA8,DLC® Listed,Declare Compliant; Dimming Technology : Incandescent (Forward Phase),ELV (Reverse Phase)
- category
- environment
- CCT
- spec →
The versatile VCOB-12xx conversion kit transforms existing Sternberg 1200 series HID luminaires into energy-efficient luminaires at significantly re...
- category
- environment
- CCT
- spec →
DirectFit LED lamps make upgrading fluorescent fixtures to LED technology effortless. By using the existing ballast, these energy-saving replacement lamps ins...
- category
- environment
- CCT
- spec delta
- wattage: 8W → 669W
- spec →
MODA MINI COVE GLOWDIM INTERIOR is an award winning, patent pending, miniature line voltage cove lighting system. GLOWDIM enabled fixtures when wired to a 0-10v dimmer to transition at 100% from 2700k down to 1800k when dimmed. Generally called “Dim to Warm” this feature strongly resembles incandescent illumination and transforms restaurants, bars and any hospitality location creating moods and warm environments.
- category
- environment
- CCT
- spec →
GENERATION 2 LED STRIP - ADA The LED Strip Generation 2 is designed to imitate the look of a traditional T5/T8 double fluorescent strip with the energy savings expected from its LED source. The units are available in 2’, 4’ and 8’ units with a standard 120-277V, 0-10v dimmable driver. 4000°K. Each unit is linkable in the field to reduce installation costs. This "Value Series" unit is a cost-effective solution for any project.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 80W
- spec →
LED retro-fit kits for sconces and ceiling applications. Easy magnetic mount to metal pan. Available in six different sizes and lumen packages. Easy to install.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 32W
- spec →
An even, continuous, tubular, architectural light source with a minimal profile, providing evenly diffused light from a single LED source at the top of the tube. Perfectly designed for spaces requiring diffused light that provides soft and even illumination on walls, ceilings, and work surfaces. The minimalist size of the profile creates visual interest without overwhelming a space. Subtle illuminated joints maintain the continuous look with minimal distraction. The customizable HPC Solo system provides many configurations to fit any space including standard configurations for straight, curved, or welded continuous runs, as well a free form design possibilities with horizontal and vertical change of direction possible. All illuminated in our slimmest 2” dia. profile, HPC Solo will ensure your space feels considered and beautiful. HPC Solo Curve comes standard in various radius and segment combinations for horizontal change of direction. For vertical curving or ceiling-to-wall transitions, please use the HPC Solo FreeForm.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 96W
- spec →
The 4243 Low Voltage Step & Marker is designed for efficient illumination with an eyelid cover plate, constructed from durable A360 die-cast aluminum and finished in 18 colors. It features a frosted, shock and heat resistant glass lens and comes with a 1.1W, T3 LED lamp (unless specified otherwise) for consistent lighting. Includes an easy-to-install surface mounting plate.
- category
- environment
- CCT
- spec →
LED ceiling fixture that comes with a 1" ø solid clear frosted acrylic diffuser available in 3 lengths; SM 6.5", MD 10" and LG 16". Can be customized in other size, finish, lamping and dimming options. LED available with multiple dimming options
- category
- environment
- CCT
- spec →
The LSSR2 is the ultimate flexible strip retrofit with lumen output and color temperature selection at the point of installation. A cost-effective solution to retrofit existing T8/T12 fluorescent strips to LED technology.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 75W
- spec →
Featuring a translucent polycarbonate lens, the ALSET® 48" Linear Direct Wire LED Tube is both energy efficient and affordable. The ETL and DLC certified fixture is instant on and features ANSI surge protection. It's perfect for any location where fluorescent tubes are being replaced.
- category
- environment
- CCT
- spec →
GIOTTO is a luminous hanging ring with LED lighting and available in 3 standard sizes: 31.5″, 43,31″, 55.12″. 360° lighting from 3000K to 4000K . Thanks to its technology, the lamp is a unique diffuser suitable to light up rooms with a comfortable homogeneity.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 65W
- spec →
Round, flexible architectural light that bends and emits light in all directions. Water resistant with precision light quality and full diffusion for a dotless look. Standard color temperatures (CCTs) from 2400K to 4000K, and light output up to 250+ lumens per foot.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 3.7W
- spec →
USE OF PRODUCTPRIME Square Luminaire Series may be used in hospitality, commercial, retail, and residential applications. This product will reduce energy consumption, emits little heat, and reduces cooling loads for added costs savings. Approximately 75% in energy savings compared to incandescent light source
- category
- environment
- CCT
- spec delta
- wattage: 8W → 24W
LEDUR series of 120V dimmable Under Cabinet LED lighting. The LEDUR allows for easy retrofitting of existing Fluorescent, Incandescent, Halogen, or Xenon undercabinet lights. LEDUR's built in LED driver and large knockout plate in the back makes LEDUR easy to install in retrofit or new construction applications. A heavily frosted lens diffuses the LED image and softens the light output. Available in five sizes, two finishes, and warm 2700K, 3000K or cool 4000K. The new LEDUR LED undercabinet is a designers choice for quality, energy efficient LED lighting. Features: • Edge-Lit design eliminate diode image • Excellent color rendition - 90+ CRI • 350+ Lumens and 7 Watts per foot average • 2700K or 3000K • Available in 6 lengths from 8-3/4" to 42" • Low 1" depth by 3-1/2" width • Dark Bronze or White finish • Frosted Lens • Built-in On/Off switch • 120V Dimmable • Linkable up to 400 Watts • 3-Wire grounded electrical port on both ends for power or linking • Can be directly hardwired with Romex™ feed • Each unit includes Romex™ Connector and End-to-End Connector • Includes Stab-In quick connectors • Easy to mount with captive screws • Integral electronic driver • Easy to mount with captive screws • 50,000 hours rated lamp life Included with every LEDUR: (1) 120V LEDUR, (1) End to End Connector [NUA-803], (1) On/Off Rocker switch Voltage: 120V DC Power Consumption: 7W per foot Lumens: 350+ Lumens per foot average Color Rendering Index: 90+ CRI Light Source: Edge-Lit LEDs Life Expectancy: 50,000 hours Maximum Run Length: 400 Watts linked fixtures Color Temperature: 2700K or 3000K Dimensions: Length: 42" Width: 3-1/2" Height: 1" Listing: cULus Listed for Dry location
- category
- environment
- CCT
- wattage
- spec →
Switch from a 2700K to 5000K by using manual switch on driver Soft white lens provides smooth lumen distribution Medium base to quick connect adapter included (PSA30) cUL listed for wet locations Title 24 JA8-2019 Compliant Dimmable Triac/ELV
- category
- environment
- CCT
- wattage
- spec →
The versatile VCOB-6590 conversion kit transforms existing Sternberg 6590 Victorian Gaslight HID luminaires into energy-efficient luminaires at sign...
- category
- environment
- CCT
- spec →
X-FLEX is a flexible linear system with quality specifications and massive delivered output. X-FLEX offers a high output LED package that provides up to 503 lm/ft. The FPCB is a unique MODA design that allows for evenly distributed light levels and power management. It is field cuttable and comes with many modular accessories. X-FLEX covers many applications due to the high level of delivered light. Applications include T5 replacement and general illumination once integrated with XTRUSION. X-FLEX comes with multiple layers of copper that runs through the FPCB for longer life and healthy ambient operating temperatures. X-FLEX is designed to provide high levels of light. It utilizes over 1000 high quality LEDs and provides excellent consistency. X-FLEX is a technology driven advancement and one of the latest MODA LIGHT products that shows new standards in light levels.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 150W
- spec →
GENERATION 3 LED COLOR SELECTABLE STRIP - ADA The LED Strip Generation 3 is designed to imitate the look of a traditional T5/T8 double fluorescent strip with the energy savings expected from its LED source. The units are color selectable between 3500°K, 4000°K and 5000°K and available in 2’, 4’ and 8’ units with a standard 120-277V, 0-10v dimmable driver. Each unit is linkable in the field to reduce installation costs. This "Value Series" unit is a cost-effective solution for any project.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 80W
- spec →
LED retro-fit kits for sconces and ceiling applications. Easy magnetic mount to metal pan. Available in six different sizes and lumen packages. Easy to install.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 26W
- spec →
The RK97 is a Retrofit Kit designed to upgrade Hydrel® M9700 Series fixtures with Vista's 1188 LED technology. It facilitates easy installation without disturbing existing structures, offering the 1188's advanced COB LED features, over 3000 lumens output, and multiple CCT options. Ideal for commercial retrofitting, IP68 rated.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 30W
- spec →
Made with a die cast aluminum housing with stainless steel fasteners. Designed to efficiently operate PAR30 lamps. A high temperature drain plug is provided for uplight applications. A sturdy knuckle mount with locknut is provided for a secure installation. ETL listed for wet locations.
- category
- environment
- CCT
- spec →
The HARRIS SFHR2 is ideal for retrofitting existing traditional linear fluorescent strip fixtures to LED. For use in areas such as manufacturing, distribution, warehouse, and retail settings.
- category
- environment
- CCT
- spec delta
- wattage: 8W → 59W
- spec →
Featuring a translucent polycarbonate lens, the ALSET® 24" LED T8 Direct Wire Tube is both energy efficient and affordable. The ETL and DLC certified fixture is instant on and features ANSI surge protection. It's perfect for any location where fluorescent tubes are being replaced.
- category
- environment
- CCT
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →