PMNOPMX
Spec Sheet IES Files HOUSING Heavy-Duty Die Cast Aluminum Housing construction with silicone gaskets and stainless-steel fasteners. Drivers, sensors, and battery backup are mounted on internally for easy maintenance. LISTING & RATINGS ETL: Listed for Wet Locations, ANSI/UL 1598, 8750. ETL Sanitation certified to National Sanitation Foundation ANSI NSF2, Food Splash Zone. IP66 Sealed LED Compartment, Pressure wash rated to 1400 PSI. FINISH Powdercoat Finish Over a Chromate Conversion Coating. LENS Clear UV-Stabilized Polycarbonate or Optional DR Acrylic Lens. Medium Distribution (80˚ Beam). MOUNTING OPTIONS Suspended Using Die Cast Aluminum Captive Hook EasyLED LED Aluminum Boards WATTAGE 100w, 150w, 200w, or 240w Array DRIVER Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 4KV to 6kV depending on wattage. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. CONTROLS Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Pemco Controls and May Not Function Properly with Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. WARRANTY 5-Year Warranty for -40°C to +55°C Environment.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The ALB series area light luminaire with integral Dusk to Dawn photocell offers the latest in LED lightening technology. It easily mounts to a wall, post or onto a pole mounting arm (sold separately). The ALB is perfect for illuminating large areas like barns, yards, loading bays, warehouses, side roads and pathways.
- category
- environment
- voltage
- CCT
- dimming
- lens
- +2 more
- voltage: 120V/277V/347V/480V → 120V
- wattage: 254W → 145W
- spec →
Lumark® NFFLD Night Falcon Series
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +2 more
- voltage: 120V/277V/347V/480V → 277V/347V/480V
- wattage: 254W → 450W
- spec →
The Lumark RPGC Round Parking Garage and Canopy luminaire is an innovative, energy-efficient LED fixture. The RPGC is designed to replace traditional HID fixtures on a one-to-one basis from 150W up to 250W HID. The low profile, rugged construction, features a selectable lumen switch that allows for seamless integration into illuminating parking garages, canopy, stairwells and low-bay retail installations where high security llumination and energy savings are needed.
- category
- environment
- voltage
- CCT
- wattage
- dimming
- +2 more
- voltage: 120V/277V/347V/480V → 277V/347V
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +2 more
- voltage: 120V/277V/347V/480V → 277V/347V/480V
- wattage: 254W → 67W
- spec →
The Metalux VT4 LED Series is an energy efficient industrial Vaportite fixture that features rugged and durable construction. The VT4 LED incorporates a full metal tray and heat sink inside a reinforced sealed and gasketed fiberglass housing with a high impact diffuser. This Vaportite series is suitable for interior and exterior applications and can be surface, chain, cable or stem mounted.
- category
- environment
- voltage
- CCT
- wattage
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → UNV
- spec →
Williams GNR LED high bay is NSF/ANSI 2 certified and IP66 rated for food processing, cold storage, and washdown areas. Built for high-pressure cleaning and extreme temperatures with optional motion sensor and battery backup.
- category
- environment
- voltage
- CCT
- dimming
- lens
- +2 more
- voltage: 120V/277V/347V/480V → UNV
- spec →
The OSQW™ wall mount luminaire features NanoComfort® Technology which provides superior glare reduction and visual comfort with high-efficiency illumination delivered precisely where it is needed. Designed for easy installation with through-wired or conduit entry from the top, bottom, sides and rear. Plus, emergency battery back-up option is available.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- wattage: 254W → 55W
- spec →
Light engine used with Koto™ Architectural Housings See Koto™ Architectural housings for lumen output options. Final lumen output is determined by housing. Driver on housing extends lifespan and allows for more dimming and EM options Standard 38° Lens installed, 25° and 60° lens included with each module - Optional Lens: 18° (EP731C) Optional: Louver ( L45 ), Linear Lens ( L46 ), Spread Lens ( L47 ), Frosted Lens ( L49 ), Optional Reflectors: 15º (EP735C), 25º (EP736C), 38º (EP737C), 60º (EP738C) Works in 2″, 3″, 4″ & 6″ ELCO Housings with Koto™ twist-on trims Excellent color rendering 95+ CRI Sunset option dims from 3000K to 1800K ENERGY STAR Certified Title 24 JA8-2019 Compliant Life span of 50,000 hours L70 Covered by U.S. PATENTS and Patents Pending
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +2 more
- voltage: 120V/277V/347V/480V → UNV
- wattage: 254W → 19W
- spec →
Wireless Control High Bay Lighting System
- category
- environment
- voltage
- CCT
- wattage
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → 277V
- beam_angle: 40° → 110°
- spec →
The Linea LED light fixture brings simplicity to the patient room without sacrificing performance or functionality. The multifunctional luminaire offers reading, ambient and exam functionalities in a slim and sophisticated design that brings home-like comfort to the patient room environment. Engineered with the latest LED technology, the Linea delivers shadow-free illumination to facilitate healing and support clinicians with reliable and consistent performance.
- category
- environment
- voltage
- CCT
- wattage
- lens
- +2 more
- voltage: 120V/277V/347V/480V → 120V
- spec →
2” aperture direct/indirect acoustic panel luminaire The Chill HL2 direct/indirect luminaire is designed to enhance interior spaces with subtle to bold colors, while damping sound reflections. The 2” wide aperture fixture is clad with ½” thick felt acoustic panels in 8”, 12” or 16” heights and twenty standard colors. Fixture end treatments include matching acoustic material, machined aluminum end caps with powder coat or printed imagery options or solid wood end caps in a variety of finishes. The HL2 is Controls Capable, being offered with a variety of integrated control options. Add further sound absorption in an architectural space with complimenting HB2 non-illuminated acoustic baffles.
- category
- environment
- voltage
- CCT
- dimming
- lens
- +2 more
- voltage: 120V/277V/347V/480V → 120V/277V
- wattage: 254W → 10W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →