PMAMERWMSET
Radiant™ LED Conformal Coating LED light engine CCT: Standard-4000K 2700K, Amber, LPS (1800K) Offered – Consult Factory Static Colors Available – Contact Factory Distribution Type IV Full Cutoff Electrical Electronic Driver, 120-277V, 50/60Hz 0-10V Dimmable Driver Standard Surge Protection Included (6kV Line-Line; 10kV Line-Earth) Wall Mount For all Wall Mounted Fixtures, Back Plates Are Not Predrilled at the Factory. This Allows Installation Contractors the Ability to Match Mounting Holes (By Contractor) to Specified Mounting Surfaces. Housing & Arm Construction Housing is made of cast aluminum Decorative Arms are Constructed From Extruded Tubes and/or Aluminum Sand Cast parts. Parts are Welded and then Heat Treated to a T6 Hardness for Maximum Strength Finish Super Durable Polyester Powder Coat Finish. Custom Finishes Available, Including Patinas and All RAL Colors. Listings & Ratings ETL Listed to UL 1598 Standard for Wet Location and IP66. LED is IP66 Rated Warranty 5 Year Limited Warranty Value Sets are preconfigured FIXTURE + ARM components in popular combinations that are made available with a simple catalog number. These configurations contain highly specified characteristics and when ordered as a Wall Mount Value Set are a greater value. Different configurations are available by ordering the standard product.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
IC Rated for direct contact with insulation, for use in IC and Non-IC applications Select Color Temperature (2700K to 5000K) and Lumen Output (850 lm to 1500 lm) by using manual switch on module Adjustable Focus Beam Angle allows for manual beam angle adjustment from 30˚ to 70˚ range with the easy of a twist Featured Twist-On mechanism to easily locked module to any size trim Encased Quick Connector for easy module installation Works in 4", 6", and 8" Commercial Frames, Remodel and Retrofit applications 120/277V input with 0-10V dimming Excellent color rendering 93+ CRI Meets Energy Star Requirements ETL listed for damp location Life span of 50,000 hours L70
- category
- environment
- voltage
- CCT
- spec →
The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D1 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.
- category
- environment
- voltage
- CCT
- spec →
RAIL66 system allows for slidable placement. IP66. Class I. IK08. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Silicone CCG® Controlled Compression Gasket. Safety glass lens, hinged. Including 1 ft of flexible cable enclosed in a stainless conduit, in-line connector and mounting clamp for installation to RAIL66 mounting system. CAD-optimized optics for superior illumination and glare control. Integral driver. OLC® One LED Concept. Advanced thermal management protects LEDs while optimizing lumens output. 0-10V Dimming comes standard with luminaire. Luminaire is factory-sealed and does not need to be opened during installation. Mount permits 355° rotation and 180° tilt. Specify product with 7 Digit product code – Finish Color. Accessories, such as mounting, optical, and electrical, must be specified separately. Example: XXX-XXXX-9004 (Black) + XXX-XXXX (Accessory 1)
- category
- environment
- voltage
- CCT
- spec →
Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. The Origin lineup of Wall Lights offers a range of lumen packages and housing sizes to meet a variety of different applications. The housings retain a traditional design that closely resembles older HID fixtures. This allows the customer to upgrade to LED gradually if needed, and reduces the additional work required, such as painting or repairing the wall.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- spec →
MasterClass, LEDtube, T8, 47-1/4 inch, 8.4 W, 4000 K, 1600 lm, 50000 hour(s), 190 lm/W, G13, Glass, 0 %
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- spec →
Enclosed wall luminaires in five sizes with different light outputs with LEDs or for fluorescent lamps. Hand-blown, three-ply opal glass and precise metal parts integrate to perfection. The three-ply opal glass distributes the neutral colored light from the lamps, softly and uniformly.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- spec →
Featuring a contoured architectural housing, design elements on the side panels for visual interest, and moveable mounting hardware that slides the length of the fixture, the AXA series, available in T5/T8 or LED, is ideal for offices, classrooms, or conference rooms.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- spec →
The T252L-Series, Cylindra™ 11W LED approximates the light output and distribution of a 75W MR16 halogen lamp but consumes just 1/4 of the energy and lasts 15-times longer. Available in 4 color
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 120V
- spec →
The LAB Series crowned traditional acorn luminaire features a durable, corrosion-resistant aluminum fitter and crown with a high-impact clear acrylic globe - available in two globe sizes and includes multiple decorative fitter options. It utilizes a three-dimensional LED Power Array™ with individual tubes aimed for wide, efficient light distribution (Types II, III, IV, and V). Available in neutral, cool, and warm white LEDs, it offers lumen maintenance of L94 at 60,000 hours. The fixture supports dimming, is wet-location listed, and features a polyester powder coat finish for durability. Optional photocells, motion sensors, and fuses are available. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
The RCGV Series traditional luminaire is a line of 4-rung half-caged globes that feature a one-piece high-impact acrylic globe with a corrosion-resistant cast aluminum fitter and cage, ensuring durability. The standard fitter has a 3” I.D. opening for tenon mounting. The LED Power Array comprises individual LED tubes that provide uniform luminance and are sealed to an IP65 standard. The acrylic tube lens diffuses the raw LED light, while the optional 6" prismatic glass refractor offers precise optical control. Available in various color temperatures, the LEDs maintain high performance for up to 100,000 hours. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- spec →
Flex Tube SC is a flexible, direct view LED strip that features a single color output, with a wired digital communication network. It comes in a 10m spool that can be cut to length to suit project requirements or you can specify custom build to order lengths. It features a highly durable PVC body which is outdoor rated
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 277V
- spec →
Siemon & Salazar's latest sconce utilizes the ancient technique of sand casting, which creates a tactile texture on the glass that also helps diffuse the light. A hand-formed brass armature secures the hemispherical piece of glass. The design is beautiful, possessing a sense of elegant jewelry while also being functional. Each shape is unique. Shaped in lead free crystal. Designed by Caleb Siemon & Carmen Salazar. Made in California. Signed. View/Download Tearsheet SPECSDimensions*: 7.75" x 10" x 4"Materials: glass, metalProduct weight*: 7.5 lbsLight source: integrated LEDLight output: Constant CCT: 816 Lumens (source), based on 2700 K / Warm Dim: 852 Lumens (source), based on 3000 K Light color: 2700 K, 3000 K, or Warm Dim (1800 K - 3000 K)Color accuracy: 90+ CRIPower usage: 10.5 WDimmability: TRIAC, ELV, and 0-10 V dimmingDriver location: Can be housed in J-box or remotelyDriver dimensions: 2.69” x 1.56” x 0.69”UL listed for damp locationsSpecifications subject to changeC-UL-US | BAA GLASS FINISHCrystal sand glass METAL FINISHSatin Brushed BrassSatin Distressed Brass LAMPING2700 K LED3000 K LEDWarm Dim LED (1800 K - 3000 K) DRIVER120V - 277V AC input voltage TRIAC, ELV, & 0-10 V dimming * Each piece of hand-blown and cast glass is a unique work of art. Dimensions, weight, and color will vary. When multiple fixtures are installed next to each other, expect some variation in shape and color.
- category
- environment
- mounting
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 277V
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →