PB1TQ
Housing: Die Cast Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat, Dome and Pyramid Top, Internal Driver Tray for Easy Maintenance. ½” Coin Plugs for Photocell and Conduit Entry. Listing & Ratings: ETL: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Reflector: Reflective White Polycarbonate Cone Reflector Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens. Mounting: Flush Mount on Flat Surfaces. Cast-In Electrical Box Template with ½” Coin Plug on Bottom. EasyLED LED: Aluminum Boards Wattage: Array: 23w, System: 27w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -20°C to +40°C Environment.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
UL Listed for factory or field installation. Suitable for damp locations (0°C - 50°C).
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V → UNV
- spec →
Fail-Safe Vandal Resistant 11" Round, Wall or Ceiling, 10 - 25 Watt, IP65
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V → UNV
- spec →
The LiteKeeper 4 stand-alone lighting control panel is an all inclusive premium grade system for applications that would traditionally use a time clock in conjunction with contactors. Control up to four 20A circuits. The LiteKeeper 4 has more standard features than any other stand-alone panel on the market to create a state of the art stand-alone lighting control system.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V → UNV
- spec →
The MST2850L LED twin head motion activated flood is ideal in outdoor areas where a low-maintenance solution is required. Producing 2000 lumens, this fixture provides area coverage equivalent to 180W incandescent. The motion sensor pivots for wall or eave mount installation, and includes a photocontrol for nighttime operation. This outdoor rated product utilizes a durable polycarbonate housing with die-cast aluminum heads, and is available in white or bronze finish.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V → 120V
- beam_angle: 20° → 180°
- spec →
The HALO Home Smart Motion Floodlight incorporates the system's wireless Bluetooth technology into a durable, twin head design for an advanced outdoor lighting solution built for high performance. Features configurable settings for both the motion sensor and floodlight, including sensitivity, duration and scene control, as well as grouping, scheduling, dimming, and white color tuning. The motion sensor works as a HALO Home controller that can be commissioned to control the light it's attached to or an entire Group of HALO Home-enabled lighting for increased motion-activated security. This unit does not require a hub or internet service and can be wirelessly controlled by a HALO Home Dimmer or smartphone/tablet. White - MST20C18W Bronze - MST20C18B (Do not use in combination with non-HALO Home dimmers)
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V → UNV
- spec →
Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. This high-performance security light features two high-brightness LED heads and a built-in passive infrared motion sensor.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V → 277V
- spec →
The IOTA ILBHI CP20 HE SD HV is a UL Listed emergency LED driver for field and factory installation that allows a 347-480VAC fixture with 55-200VDC Non-Class 2 LED lighting loads to be used for both
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V → 347V/480V
Camber 5 The Camber 5 Wall Luminaire, the fifth of the configurations in the versatile Camber family, by U.S. Architectural Lighting features a modern, eclectic design combining curvilinear and rectilinear elements. Constructed from durable low-copper cast aluminum (A356 alloy) with a TGIC polyester powder coat finish, it is built for long-lasting performance. With dimensions of 24" height, 10" width, and 10.5" depth, it is ideal for architectural applications. Equipped with the Power Array™ LED system, the Camber 5 supports up to 12 LEDs with color temperatures of 2700K, 3000K, 4000K, or 5000K. Its adjustable glare shield and reflectors allow for customizable lighting control, making it perfect for both interior and exterior installations. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V → UNV
- beam_angle: 20° → 90.2°
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →