PAL70Q
Housing: Die Cast Aluminum Housing & Hinged Front Frame, ½˝ Coin Plugs for Conduit & Photocell. Listing & Ratings: ETL: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens Mounting Options: Mount with Two-Piece Swivel Bracket, Adjustable Slipfitter, 6˝, 10˝ or 12˝ Extruded Mounting Arm. EasyLED LED: Aluminum Boards Wattage: Array: 87.6w, System: 91w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The EarthTronics LED Adjustable Wall Packs has a slim profile design. They can be locked into any angle ranging from 0° to 90° providing exterior security illumination where required. The durable die cast aluminum housing is powder coated to maintain the fixture appearance for several years. Select from 3000K, 4000K or 5000K color temperatures as well as several different lumen levels, this is easily done by the dial switch located on the product. It features a high 80+ CRI providing an excellent light source for nearly any task. The polycarbonate lens provides durability and resistance impact, and the conduit entry points allow direct wall or junction box mounting. These adjustable wall pack fixtures feature 120-347V universal voltage. This fixture can withstand the elements, it’s made to last in the outdoors with the IP65 rating and a minimum start temperature of -40°F. They are equipped with a 0 – 10 volt continuous dimming driver with a dimming range capability of 10% to 100%. The long 50,000-hour life is backup with a 10 year limited warranty. The wall pack fixture requires a properly anchored UL recognized junction box for proper installation. Night sky complaint. Photocell built-in.
- category
- environment
- voltage
- CCT
- CRI
- beam angle
- +3 more
- voltage: 120V/277V/347V/480V → 120V/347V/UNV
- wattage: 250W → 120W
- spec →
The SCOTTSDALE® VERTEX™ is the most feature-rich gas canopy LED fixture on the market today. Its Symmetric Combination Forward Throw optic – make extra flood lights between the gas canopy and convenience store unnecessary saving the owner money without sacrificing performance. Vertex has a rugged low profile housing and is available in five lumen packages: 10K, 13K, 15K, 20K and 23K. The below canopy field serviceability, dimming capability and optional integral Bluetooth™ motion and photocell sensor make Vertex the ideal solution for gas canopies. Ideal Applications: Petroleum station lighting / gasoline station lighting, convenience store lighting / C-Store lighting. Who sells our products? Various lighting sales agents, lighting manufacturer’s representatives, lighting distributors. See our Sales Representative Locator . Refueling and Convenience Store
- category
- environment
- voltage
- CCT
- CRI
- beam angle
- +4 more
- voltage: 120V/277V/347V/480V → UNV
- spec →
The PFX-3606 is a versatile round canopy luminaire designed for high-performance lighting in wet locations. This sensor-ready fixture features field-selectable technology, allowing users to choose between three color temperatures (3000K, 4000K, or 5000K) and five lumen outputs ranging from approximately 3,000 to 11,000 lumens. Constructed with a durable die-cast aluminum housing and a polycarbonate lens, it boasts an IP65 ingress rating and IK10 impact protection. The unit is equipped with standard 0-10V dimming, an integrated photocell, and 6kV surge protection for enhanced reliability. Its long-life LEDs are rated for up to 167,000 hours, ensuring significantly reduced maintenance costs over time. Supporting both surface and pendant mounting, the PFX-3606 is a flexible solution for various commercial and industrial environments.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → UNV
- beam_angle: 40° → 135°
- spec →
FCC LED combines security construction features with energy savings technology. This corner mount fixture uses a one-piece clamshell housing, security lensing, and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. Energy efficient LEDs and standard 0-10V dimming driver make this corner correctional fixture the ideal choice for your next project.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → UNV
- wattage: 250W → 14W
- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V/347V/480V → 277V/UNV
- wattage: 250W → 18W
- beam_angle: 40° → 90°
- spec →
Lumark® NFFLD Night Falcon Series
- category
- environment
- voltage
- beam angle
- dimming
- lens
- +2 more
- voltage: 120V/277V/347V/480V → 277V/347V/480V
- cct: 5000K → 4000K
- wattage: 250W → 450W
- spec →
The XAS All-Selectable Area Site series delivers powerful, high-performance illumination with exceptional flexibility for a wide range of outdoor applications. Available in 180W and 300W configurations, it provides adjustable outputs up to 46,000 lumens, with selectable 3000K, 4000K, and 5000K color temperatures and Type III, IV, and V distributions. Each fixture features versatile mounting options and a twistlock photocell for streamlined installation and control. Designed for parking lots, roadways, and large outdoor spaces, the XAS series ensures reliable, efficient, and adaptable lighting performance.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +2 more
- voltage: 120V/277V/347V/480V → 120-347V
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +2 more
- voltage: 120V/277V/347V/480V → 277V/347V/480V
- wattage: 250W → 67W
- spec →
Metalux VHB designed for a variety of applications with a balance of performance and affordability
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → UNV
- spec →
The TWR LED wall pack luminaires offer a classic appearance and traditional shape to help maintain building aesthetics when replacing the entire site or only a portion of a building’s wall packs.
- category
- environment
- voltage
- CRI
- dimming
- lens
- +2 more
- voltage: 120V/277V/347V/480V → UNV
- cct: 5000K → 3000K
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →