HUR25Q
Housing: Heavy-Duty Die Cast Aluminum Housing with ¾” Stainless Steel Close-Up Plugs for Wiring Entrance Conduits and Fittings. Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating, -25°C to +50°C Ambient. Suitable for Wet Locations, IP66 Sealed LED Compartment Finish: Powdercoat Finish Over a Chromate Conversion Coating. Lens: Clear Tempered Glass Lens Mounting Options: Mount with Stamped Steel Adjustable Yoke. Includes 3´ 16/3 SJOOW Yellow Jacketed Cord and Rated Connector. Rated for 6 #12 AWG 90°C for Through Wiring. EasyLED LED: Aluminum Boards Wattage: Array: 132.2w, System: 140.2w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
Litetronics Slim Wall Packs are available in two sizes and range from 40W to 120W. The units are offered with selectable wattage and CCT (3000K, 4000K and 5000K), photocell, and pluggable sensor socket. Optional Sensors include PIR (SC005), Microwave (SC006) and our LiteSmart Sensor (SC008) enabling the same energy saving control but can be setup and managed on a group level via the LiteSmart mobile app to meet code and local ordinance. The fixtures offer ease of installation with swing-open unit to facilitate mounting and electrical connections and include EVA cotton pad for wall mount installation.
- category
- environment
- voltage
- CCT
- CRI
- wattage
- +3 more
- beam_angle: 25° → 113°
- spec →
The OWG5 LED Wall Pack is an enhanced version of the traditional wall pack design, featuring selectable CCT (correlated color temperature), an optional adjustable lumens (wattage) setting, and now with adjustable beam throw. With an impressive output of up to 145 lumens per watt, the OWG5 provides powerful and evenly distributed light. Its installation is hassle-free, allowing attachment to walls or direct mounting on a J-Box using its separable hinged backplate. An internal switch board enables users to customize the CCT within the range of 3000/4000/5000K, adjust the wattage output to high, medium, or low settings, and customize the beam angle to have a near, mid, or far throw. An integral photocell comes standard and can be enabled as needed. Equipped with four knockouts for through-wiring or sensor additions, the OWG5 is an excellent choice for security and perimeter lighting various commercial locations and multi-family complexes.
- category
- environment
- voltage
- CCT
- CRI
- wattage
- +2 more
- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V → UNV
- wattage: 140.2W → 850W
- spec →
The Ephesus LumaSport 12 is engineered with precision optics and advanced glare control that minimizes light spill and sky glow. Designed for communities that value environmental stewardship and DarkSky compliance, the system delivers powerful illumination, reliable performance, and simplified installation through its remote power architecture.
- category
- environment
- voltage
- CCT
- CRI
- lens
- +1 more
- voltage: 120V/277V → 277-480V
- wattage: 140.2W → 987W
- spec →
FCC LED combines security construction features with energy savings technology. This corner mount fixture uses a one-piece clamshell housing, security lensing, and tamper-resistant fasteners to maximize impact resistance and prevent contraband concealment and unauthorized fixture penetration. Energy efficient LEDs and standard 0-10V dimming driver make this corner correctional fixture the ideal choice for your next project.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: 120V/277V → UNV
- wattage: 140.2W → 14W
- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V → 277V/UNV
- wattage: 140.2W → 18W
- beam_angle: 25° → 90°
- spec →
The classic lines and sophisticated construction of the Vision Wall luminaire make it an ideal complement to architectural site design. Offering LED technology across the site, flood and wall mounted fixtures the Vision series provides true family scaling in both physical form and lumen capability for architectural site lighting applications.
- category
- environment
- voltage
- CCT
- wattage
- dimming
- +2 more
- voltage: 120V/277V → 277V
- spec →
Lumark® NFFLD Night Falcon Series
- category
- environment
- voltage
- CCT
- dimming
- lens
- +2 more
- voltage: 120V/277V → 277V/347V/480V
- wattage: 140.2W → 450W
- spec →
The XAS All-Selectable Area Site series delivers powerful, high-performance illumination with exceptional flexibility for a wide range of outdoor applications. Available in 180W and 300W configurations, it provides adjustable outputs up to 46,000 lumens, with selectable 3000K, 4000K, and 5000K color temperatures and Type III, IV, and V distributions. Each fixture features versatile mounting options and a twistlock photocell for streamlined installation and control. Designed for parking lots, roadways, and large outdoor spaces, the XAS series ensures reliable, efficient, and adaptable lighting performance.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +2 more
- voltage: 120V/277V → 120-347V
- wattage: 140.2W → 300W
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- voltage
- CCT
- dimming
- housing
- +1 more
- voltage: 120V/277V → 277V/347V/480V
- wattage: 140.2W → 67W
- spec →
Metalux VHB designed for a variety of applications with a balance of performance and affordability
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +1 more
- voltage: 120V/277V → UNV
- spec →
Designed for use in architectural and commercial applications with limited plenum height, the patented WaveStream optical technology provides uniform, glare-free illumination along with high efficacy, providing the perfect solution for high ceiling applications.
- category
- environment
- voltage
- CCT
- CRI
- dimming
- +2 more
- voltage: 120V/277V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →