HATSHCQ
Housing: Die Cast Gasketed Aluminum Half Cutoff Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: ETL: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The LSL2 Series is a high-performance stadium lighting solution engineered with an innovative Remote Power System. This design streamlines installation, increases on-site flexibility, and significantly reduces maintenance time by eliminating the need for bucket trucks or crane equipment to service drivers.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V/347V/480V → UNV
- wattage: 250W → 850W
- spec →
The VRVT1 series is the contractor go to complex environment luminaire that combines the rugged, wet location rated construction of a vaportite with selectable CCT and lumens. The VRVT1 is available in 4' and 8' sizes, performance up to 11,500 lumens with emergency back-up and sensor options. VRVT1 boasts an IK10 rated lens and housing sealed with Torx head tamper-resistant screws for added protection.
- category
- environment
- voltage
- CCT
- dimming
- lens
- +1 more
- voltage: 120V/277V/347V/480V → UNV
- wattage: 250W → 78W
- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V/347V/480V → 277V/UNV
- wattage: 250W → 18W
- beam_angle: 40° → 90°
- spec →
Lumark® NFFLD Night Falcon Series
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → 277V/347V/480V
- wattage: 250W → 450W
- spec →
The XAS All-Selectable Area Site series delivers powerful, high-performance illumination with exceptional flexibility for a wide range of outdoor applications. Available in 180W and 300W configurations, it provides adjustable outputs up to 46,000 lumens, with selectable 3000K, 4000K, and 5000K color temperatures and Type III, IV, and V distributions. Each fixture features versatile mounting options and a twistlock photocell for streamlined installation and control. Designed for parking lots, roadways, and large outdoor spaces, the XAS series ensures reliable, efficient, and adaptable lighting performance.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V/347V/480V → 120-347V
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → 277V/347V/480V
- wattage: 250W → 67W
- spec →
The Metalux VT4 LED Series is an energy efficient industrial Vaportite fixture that features rugged and durable construction. The VT4 LED incorporates a full metal tray and heat sink inside a reinforced sealed and gasketed fiberglass housing with a high impact diffuser. This Vaportite series is suitable for interior and exterior applications and can be surface, chain, cable or stem mounted.
- category
- environment
- voltage
- CCT
- wattage
- dimming
- +2 more
- voltage: 120V/277V/347V/480V → UNV
- spec →
Square Canopy Luminaire Field Selectable Output & CCT The AMCP-SR10 is a versatile, field-customizable LED canopy light with selectable output from 3,000 to 12,000 lumens. It features CCT selection (3000K/4000K/5000K), a switchable built-in photocell, and a sensor-ready receptacle for PIR or microwave sensors. Designed for easy installation, the fixture is DLC Premium listed, IP65 rated, and available in white or bronze finishes.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V/347V/480V → UNV
- beam_angle: 40° → 87.4°
The GLS Series luminaire by Sun Valley Lighting features a traditional crowned prismatic borosilicate glass refracting lens with a corrosion-resistant cast aluminum base and decorative rungs. The luminaire base fitter has a 3” I.D. opening for tenon mounting, and comes in 2 design options. The LED Power Array offers symmetric radial distribution, with Type-III or Type-V distributions controlled by the refracting globe. High-power LEDs are available in Warm White (2700K, 3000K), Neutral White (4000K), and Cool White (5000K), with L93 lumen maintenance at 100,000 hours. The luminaire includes a 0-10V dimmable driver with surge protection and optional True Amber LEDs for wildlife-friendly lighting. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- dimming
- lens
- +1 more
- voltage: 120V/277V/347V/480V → 347480
- wattage: 250W → 72W
Camber 5 The Camber 5 Wall Luminaire, the fifth of the configurations in the versatile Camber family, by U.S. Architectural Lighting features a modern, eclectic design combining curvilinear and rectilinear elements. Constructed from durable low-copper cast aluminum (A356 alloy) with a TGIC polyester powder coat finish, it is built for long-lasting performance. With dimensions of 24" height, 10" width, and 10.5" depth, it is ideal for architectural applications. Equipped with the Power Array™ LED system, the Camber 5 supports up to 12 LEDs with color temperatures of 2700K, 3000K, 4000K, or 5000K. Its adjustable glare shield and reflectors allow for customizable lighting control, making it perfect for both interior and exterior installations. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CCT
- dimming
- spec delta
- voltage: 120V/277V/347V/480V → UNV
- wattage: 250W → 13-30W
- beam_angle: 40° → 90.2°
- spec →
The LRUFO is a UFO high bay suitable for indoor and outdoor use.
- category
- environment
- voltage
- CCT
- wattage
- lens
- +1 more
- voltage: 120V/277V/347V/480V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →