EG45QHA-WALL
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: ETL: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Lens:Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Kitty Hawk Arm, Adjustable Slipfitter, 2 3/8″ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) 1800K CCT LED: Aluminum Boards Wattage: 76w: Array: 76w, System: 82w; (55w SOX LPS Replacement) 164w: Array: 163.8w, System: 176.4w; (135w SOX LPS Replacement) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The Fail-Safe MWL Medical Wall LED is an excellent choice for headwall mounted bed lighting. The MWL provides both direct and indirect lighting, with a variety of options for patient control, including pull chains and low voltage relays. Additional optional features, including a Wavelinx Wireless Driver and VividTune White Tuning Technology, allow the fixture to be specified to meet the needs of a wide variety of facilities.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V/480V → UNV
- spec →
The passive infrared Extreme Temperature Sensor provides consistent, stable coverage where extreme heat, cold or humidity must be accommodated, and where there are wide fluctuations in temperature. Temperature compensating circuitry stabilizes sensitivity at temperatures –40°F to 125°F (-40°C to 52°C). Ambient light control circuit to avoid False ON/OFF from brief changes in background light. Lighting sweep function with selectable DIP Switch prevents unnecessary “lights ON” following power sweeps in facilities with computer control systems
- category
- environment
- voltage
- beam angle
- spec delta
- voltage: 120V/277V/347V/480V → 120V
- spec →
QuickLink delivers the fastest downlighting installation HALO has to offer. Installers can power up to 9 QuickLink lights on the single remote power supply, making it easy and efficient to install energy-saving smart lighting. Each fixture attaches to the low voltage cable in seconds with QuickLink Twist Connectors. Start with a QuickLink Kit which includes the remote power supply, 35-feet of Low-V cable, and 4 canless downlights. Then mix and match individual fixtures to complete the project.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V/480V → 120V
- spec →
A 3" aperture specification grade adjustable housing platform that accepts 75W maximum low voltage MR16 tungsten-halogen lamps. Suitable for 2x6 residential framing or shallow commercial installation. Integral Truvolt™ toroidal wound magnetic step down transformer with dual outputs compensates for dimmer losses providing full light output and is extremely low noise. Die cast lamp capsule facilitates aim and focus, unique heat sink configuration lower critical lamp pinch extending life. The platform is airtight to prevent energy loss, room drafts, dust marks on ceilings and reduce sound transmission. Insulation must be kept 3" away from top and sides of the housing. A complete fixture requires two components; a P3MR housing platform and a 3" IRiS optical element. Elements may be changed after installation to provide a variety of distributions.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V/480V → 120V
- spec →
Lumark® NFFLD Night Falcon Series
- category
- environment
- voltage
- beam angle
- spec delta
- voltage: 120V/277V/347V/480V → 277V/347V/480V
- wattage: 76W → 450W
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- voltage
- wattage
- beam angle
- spec delta
- voltage: 120V/277V/347V/480V → 277V/347V/480V
- spec →
Metalux VT2 provides sealed gasketed Vaportite solution for industrial and Commercial applications
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V/480V → UNV
- spec →
The WaveLinx CORE Pro (TRX-TCPRO2) is an on-premises hardware platform that hosts the CORE Smart Spaces IoT Platform software applications. The CORE software application provides enterprise-level functionality for WaveLinx Connected Lighting system users. It captures critical system data such as devices status, devices present value, areas power consumption from networked of up to 20 WaveLinx Area Controllers for improved maintenance and operational savings. The collected data can be shared with third-party systems via BACnet IP and Public API (REST). The application also offers user management, security management, alarms and events management and system backup functions.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V/480V → 120-347V
- spec →
Up to 85% optical efficiency with a wide variety of shielding options including slots, louvers, and perforation, Williams AI3 provides uniform indirect illumination with plenty of options to enhance the visual appeal of the fixture.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/347V/480V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →