DMR10Q
Housing: Die Cast Aluminum Driver Compartment with Formed Steel Plate. Listing & Ratings: ETL: Listed for Covered Locations, ANSI/UL 1598, 8750; IP54 Sealed LED Compartment Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request Lens: Molded Polycarbonate Optical Lens Mounting Options: Recessed Mount EasyLED LED: Aluminum Boards Wattage: 30-65w Array Systems Lumens: 4,590-7,939 Driver: Electronic Driver, 120-277V, 50/60Hz; 347V, 50/60Hz (30 & 37w Model Only); or 347-480V, 50/60Hz (30 & 37w Model Only) Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
The VT3 LED Series is an energy efficient industrial Vaportite fixture that features rugged and durable construction. The VT3 incorporates a sealed and gasketed, reinforced fiberglass housing with a high impact diffuser. This VT3 optical performance is ideal for interior and exterior applications including parking garages, food processing, canopy, manufacturing and complex environments.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V/277V/347V/480V → UNV
- wattage: 250W → 69W
- spec →
The Low Profile Canopy Series offers a brighter solution for a wide range of canopy applications. These energy-efficient fixtures produce a smooth and uniform light pattern that eliminates glare and wasted light.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V/277V/347V/480V → UNV
- spec →
The energy savings, long life, and easy-to-install design of the D-Series LED Surface Canopy luminaire make it the smart choice for canopy lighting in commercial, industrial and institutional
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V/277V/347V/480V → UNV
- wattage: 250W → 107W
- spec →
CanLume S20 The CLM-S 20” Recessed Gas Station Canopy luminaire with mounting system designed for typical canopy steel pan structures is available with an optical distribution designed to replace HID lighting systems up to 400w MH or HPS. The fixture housing is designed to emulate legacy HID canopy lights that mount through a 4 minimum diameter cut hole in the canopy. A galvanized steel back plate is provided to allow for installation over larger holes. Driver and power connection are made in an IP66 rated powder coated die cast mounting box above the canopy. Mounting heights of 12 to 20 feet can be used based on light level and uniformity requirements. BAA compliant. UL listed for wet location. IP66 rated.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V/277V/347V/480V → UNV
- beam_angle: 40° → 119.9°
- spec →
3-1/2-Inch Indoor Round Flexible Cable Pendant Mount Cylinder. Color Rendering Index : 80-89,90-100; Correlated Color Temperature : 2700K,3000K,3500K,4000K; Environment : Indoor; Light Distribution Detail : Spot,Medium,Flood,Wide Flood,Wall Wash; Light Source : LED; Listings : cCSAus,Damp Location,ENERGY STAR® Certified; Lumen Output : 1001-1500,1501-2000; Mounting : Flexible Cable Pendant, Track Mount,Flexible Cable Pendant, Canopy Mount
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V/277V/347V/480V → 120V
- wattage: 250W → 20W
- beam_angle: 40° → 12°
- spec →
The CPY400™ Canopy/Soffit Luminaire provides a high-performance solution for 12″ and 16″ canopies. The rectangular design is a direct replacement for CAN-228. It includes NanoComfort® Technology to offer energy efficiency, visual comfort, and precise light control. The Forward Throw optic illuminates the path between the pump and store, ensuring safety and performance.
- category
- subcategory
- environment
- voltage
- CCT
- dimming
- +1 more
- wattage: 250W → 117W
- spec →
iLENE Mini Cylinders are available in three sizes and lumen outputs. Using Cree COB LED technology, each iLENE includes three field changeable optics for spot, narrow flood and flood beam spreads. The optics are deep set for excellent visual comfort. The canopy mounted driver allows for cool operation and optional driver and dimming options. FEATURES Architectural die-cast aluminum construction and style Signify COB LED Technology Deep set optics Dimmable (Triac, ELV or 0-10V) Certified to the high efficacy requirements of California Title 24 JA8-2025 Lumens / Wattage: 2800lm / 40W CCT: 2700K, 3000K, 3500K, 4000K or Comfort Dim (3100K to 2000K) Field Changeable Optics: Spot, Narrow Flood and Flood are included Mounting: Surface Mounted Finishes: Black, Silver or White Optional Remote Emergency: NEPK-07LEDUNV: 7W Emergency LED Driver with Remote Test Switch
- category
- subcategory
- environment
- voltage
- CCT
- beam angle
- +2 more
- voltage: 120V/277V/347V/480V → UNV
- wattage: 250W → 40W
- spec →
This spherical pendant emits a glare-free glow of light, which is reflected by the small diamond-shaped cells that comprise the fixture. The lamp's structure ensures that the light is glare-free from above 45 degrees while also allowing the fixture to emit a downwardly directed light as well as an upward radiance, illuminating the ceiling to lend further ambiance to its surroundings. Each cell shapes the light by creating soft transitions between direct and reflected light to emphasize the pendant's remarkably radiant sphere. The Patera pendant was designed by Øivind Slaatto, who based it on the mathematics of the Fibonacci sequence. The poetic 360-degree glow of the Patera is derived from its many small diamond-shaped cells, which are assembled by hand. Each cell is meticulously designed to reflect light and delicately vary the appearance of the pendant from every angle. The brilliant mathematical structure allows the pendant to glow, free of glare, from every angle above 45 degrees while providing direct light below for ideal working light, depending on how the light is dimmed. At the same time, the design allows for a wonderful atmospheric upward light, illuminating the ceiling. The form mesmerizes the viewer from all angles – yet, instead of taking over a space, it simply adds its own poetry. It was always Øivind Slaatto’s ambition to create a contemporary chandelier that could provide today's homes and venues with soft, dynamic, and glare-free illumination that generates life and enhances the atmosphere. In every size, the Patera creates a luminous focal point in any setting. The Patera is available in sizes suitable for the largest venue to the smallest room. They all immerse their surroundings in a natural and complementary light. Whether it hangs alone or in rows, the Patera stands out. Place it high-up in a room or hotel lobby – or above dining tables in restaurants, in a child’s room, or in new expressive combinations with different sizes used together. Designed to shape light, the glowing sphere of the Patera provides outstanding illumination with its highly recognizable contemporary Danish design, which creates a captivating space – whether or not the light is switched on.
- category
- subcategory
- environment
- voltage
- CCT
- beam angle
- +2 more
- voltage: 120V/277V/347V/480V → 120V/277V
- wattage: 250W → 42W
- spec →
The LS series garage lights are the high-performance solution for the most demanding applications within a patented air cooling design. With an expected service life of 70,000 hours and an easy-install design, it provides an affordable initial cost and low total cost of ownership. With high lumen packages and precision refractive optics, the LS series can meet superior illumination performance requirements.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V/277V/347V/480V → UNV
- wattage: 250W → 70W
- spec →
18″ diameter spun aluminum or solid-copper shade. Brushed aluminum finial and heat sink. 60″ overall height. Includes 5″ diameter brushed aluminum canopy and white conductor cord. For ceiling or wall mounting. DIMENSIONS 18″ diameter x 20-1/4″ height. 60″ overall height CONSTRUCTION Spun-aluminum shade. 5″ diam. x 1/2″ deep canopy. For standard ceiling junction box mounting. UL listed, cUL (ETL/ETLc for LED) certified for dry locations. LAMPING/WATTAGE Fixtures supplied less lamps. Lamps may be ordered from d’ac. 1M60 One 60W Max, medium base, A type LED12 , 1200 TOTAL LUMENS, 12W LED35 , 3500 TOTAL LUMENS, 35W 1M60* 60W max, medium base, A type *Color Temperature Options: 2700, 3000K (standard), 3500K, and 4000K VOLTAGES 120 120V 277 277V PAINTED FINISHES WH White Gloss MG Metallic Grey AN Metallic Anthracite BZ Metallic Bronze GM Metallic Green RD Metallic Red BL Metallic Blue CU Metallic Copper BG Black Gloss MB Matte Black BC Black Crinkle T1 Light Tan T2 Medium Tan G1 Light Grey G2 Medium Grey RB Bright Red YL Bright Yellow SF Seafoam MP Magenta Pink SCF Special Finish – must supply paint chip Download page d9000 for color renderings. OPTIONS WHC White Hanging Cord STEM Rigid 1/2″ Diameter stem EMP External Emergency Ballast DIM 0-10v dimming driver; compatible with dedicated LED lamping. Contact d’ac for additional dimming control capabilities. Specification Sheet
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V/277V/347V/480V → 120V/277V
- wattage: 250W → 60W
- spec →
EarthTronics LED Canopy Fixture features a low profile design that provides the flexibility to insure the correct light level and color temperature desired in different applications. Select from 3000K, 4000K or 5000K color temperatures as well as 5,600, 8,400, 11,200, & 14,000 lumen levels, this is easily done by the dial switch located on the side of the product. It features a high 80+ CRI providing an excellent light source for nearly any task. The lens are sealed to and tested for IP65. These canopy fixtures feature 120-277V dual wattage operation. They are equipped standard with a 0 – 10 volt continuous dimming driver with a dimming range capability of 10% to 100%. This fixture is ideal for warehouses, offices, factories, hospitals and hotels. DLC® listed product.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +2 more
- voltage: 120V/277V/347V/480V → 120V/277V
- wattage: 250W → 100W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →