CAV24WS
Housing:Extruded Round Aluminum Housing with Built-in Heat Sinks. Listing & Ratings: ETL: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish:Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens:Tempered Clear Flat Glass Lens Mounting: Mount Over a 4″ Recessed Outlet Box. Wattage: Array: 15w, System: 15.2w; (Up To 50w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls:Fixtures Ordered with Factory-Installed Photocell are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Pemco Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
With the advancement in our industry-leading AccuLED Optics™ system, the next generation Navion LED area, site and roadway luminaire offers an expanded selection of optical distributions to provide the configurability and superior performance required for outdoor applications. The Navion luminaire provides uniform, glare-free, energy-efficient light for commercial, industrial and municipal parking lots as well as roadway applications. UL/cUL listed for wet locations, IP66 enclosure rating available.
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → UNV
- wattage: 50W → 440W
- spec →
As part of the TopTier™family, this area and site luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream™ optical technology blocks the line of sight from the LED light sources to the observer, while extracting the maximum amount of light on task. This approach results in a high level of uniformity and vertical footcandles that enhances safety in the application environment. The TopTier area and site luminaire is UL/cUL listed, IP66 and 3G vibration rated.
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → 277V/347V/480V
- spec →
Metalux LED High Bay with superior performance in a durable, compact design
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → UNV
- wattage: 50W → 266W
- spec →
PRODUCT SPECIFICATIONS DESCRIPTION The LSWV50 Series is an LED Wall/Vanity fixture with a 45 degree mounted motion and sound sensor designed for stairwells. It is available with multiple length and finish options. Available as Tunable White with Advantage Tune (ATTW). APPLICATIONS The LSWV50 Series of LED Wall/Vanity fixtures were designed
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → UNV
- spec →
The OSQW™ wall mount luminaire features NanoComfort® Technology which provides superior glare reduction and visual comfort with high-efficiency illumination delivered precisely where it is needed. Designed for easy installation with through-wired or conduit entry from the top, bottom, sides and rear. Plus, emergency battery back-up option is available.
- category
- environment
- mounting
- voltage
- CCT
- wattage
- +3 more
- spec →
Light engine used with Koto™ Architectural Housings See Koto™ Architectural housings for lumen output options. Final lumen output is determined by housing. Driver on housing extends lifespan and allows for more dimming and EM options Standard 38° Lens installed, 25° and 60° lens included with each module - Optional Lens: 18° (EP731C) Optional: Louver ( L45 ), Linear Lens ( L46 ), Spread Lens ( L47 ), Frosted Lens ( L49 ), Optional Reflectors: 15º (EP735C), 25º (EP736C), 38º (EP737C), 60º (EP738C) Works in 2″, 3″, 4″ & 6″ ELCO Housings with Koto™ twist-on trims Excellent color rendering 95+ CRI Sunset option dims from 3000K to 1800K ENERGY STAR Certified Title 24 JA8-2019 Compliant Life span of 50,000 hours L70 Covered by U.S. PATENTS and Patents Pending
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → UNV
- wattage: 50W → 19W
- spec →
The fixture emits symmetrical glare-free light directed downwards. The top shade helps direct the light downwards and prevent light from being emitted upwards. The white painted reflectors result in diffuse and comfortable light distribution. The reflector ring protects against direct glare. The LED-upgrade kit (also referred to as LED Retrofit kit) allows you to replace the old electrical components, console and lower reflector with a complete modern new unit, while retaining the original fixture. Albertslund Mini Post was designed by Jens Møller-Jensen in 1963 for a residential project in Albertslund, Denmark. Albertslund Maxi was released onto the market in 1980. The product design is based on an anti-glare ring, three bolts, a conical reflector and the top shade, which services as the primary reflector. The LED-upgrade kit contains all the required parts to make Albertslund Maxi even more future-proof that it already is.
- category
- environment
- CCT
- wattage
- beam angle
- dimming
- spec →
The LE155R is designed and listed for ordinary locations and is ideal for a fully customized approach to your lighting needs. The modularity and compact size of this product make this the perfect choice for custom installs. This product is ideal for task and overhead applications. Compact design with adjustable Light Bar Modules allows for focusing the light to illuminate the task. Features a remote driver box that houses the driver(s), with a low voltage cable run to each Light Bar Module. Individual Light Bar Modules are available in 2, 4, 6, or 8 ft. lengths and are adjustable (120°). Light Bar Modules are easily surface mounted to any flat surface or structure. This flexibility allows for multiple light bar configurations to illuminate any application.
- category
- environment
- voltage
- CCT
- beam angle
- dimming
- +2 more
- voltage: 120V/277V/347V/480V → 277V
- spec →
Architectural wall pack with semi-cylindrical styling integrating into commercial architecture, featuring die-cast aluminum, horizontal tempered glass lens for zero uplight, and recommended 12–20 foot mounting height. The PWP3 is Nordeon's mid-to-large Core Collection LED wall pack, engineered for commercial building perimeters, parking structure entries, and outdoor service areas requiring solid coverage without the footprint of the largest wall pack formats. A reliable energy-savings upgrade over legacy HID building-mount luminaires. Reliable commercial exterior lighting that fits where a large wall pack won't. In-stock US availability.
- category
- environment
- mounting
- voltage
- CCT
- wattage
- +3 more
- voltage: 120V/277V/347V/480V → UNV
- spec →
The EarthTronics LED Adjustable Wall Packs has a slim profile design. They can be locked into any angle ranging from 0° to 90° providing exterior security illumination where required. The durable die cast aluminum housing is powder coated to maintain the fixture appearance for several years. Select from 3000K, 4000K or 5000K color temperatures as well as several different lumen levels, this is easily done by the dial switch located on the product. It features a high 80+ CRI providing an excellent light source for nearly any task. The polycarbonate lens provides durability and resistance impact, and the conduit entry points allow direct wall or junction box mounting. These adjustable wall pack fixtures feature 120-347V universal voltage. This fixture can withstand the elements, it’s made to last in the outdoors with the IP65 rating and a minimum start temperature of -40°F. They are equipped with a 0 – 10 volt continuous dimming driver with a dimming range capability of 10% to 100%. The long 50,000-hour life is backup with a 10 year limited warranty. The wall pack fixture requires a properly anchored UL recognized junction box for proper installation. Night sky complaint. Photocell built-in.
- category
- environment
- mounting
- voltage
- CCT
- beam angle
- +2 more
- voltage: 120V/277V/347V/480V → 120V/347V/UNV
- wattage: 50W → 120W
- spec →
The LED Stairwell Fixture is a modern, energy-efficient, linear lighting solution specifically designed for limited use areas such as stairwells. Equipped with a microwave occupancy sensor and daylight sensor, the fixture reduces energy use by automatically adjusting its output based on occupancy and available light in the space. Designed with versatility in mind, the fixture includes adjustable color temperature as well as adjustable wattage, allowing the installer to fine-tune the fixture to better meet the needs of the application. The fixture can be surface, suspension, or t-grid mounted and it’s lightweight, two-piece design makes installation quick and easy, reducing overall project time.
- category
- environment
- voltage
- CCT
- wattage
- dimming
- +1 more
- voltage: 120V/277V/347V/480V → UNV
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →