PFX-3126
Field selectable color temperatures, between 3000K to 5000K, with 0-10V dimming drivers & Photocell as standard, cast Aluminum housing dark bronze in color, powder coat finish.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
LCR Regressed Light Commercial Canless Direct Mount
- category
- environment
- voltage
- lumens
- CCT
- spec delta
- voltage: 120V → 277V/UNV
- spec →
Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. This high-performance security light features two high-brightness LED heads and a built-in passive infrared motion sensor.
- category
- environment
- voltage
- lumens
- CCT
- spec →
Cobalt LED Retrofit are cULus classified for use in existing IC or Non-IC housings manufactured by Nora and others. The units produce 1000 Lumen output and rendering 90+ CRI. Cobalt fixtures integrate the latest from the Cree® COB family of LED arrays, giving bright spectacular light output and low power consumption. An obvious and smart choice for Green Energy efficient lighting in commercial and residential applications. Features 5-year limited warranty Cree® COB LED with integrated driver 1000 lumens 3000K @ 90+ CRI Dimmable Includes medium base socket for easy retrofitting GU24 Socket adapter available for use with GU24 base housings cULus classified for Wet Location Certified to the high efficacy requirements of California Title 24 JA8-2025 Compatible Housings: NFBIC-4LMRATA = Fire Rated LED Housing NFBIC-4INCATA = Fire Rated Line Voltage Housing NHIC-4LMRAT = IC Air-Tight LED Housing NHICCP-4LMRAT = CCEA LED Housing NSIC-401QAT = IC Air-Tight Line Voltage Housing NS-401QAT = Non-IC Air-Tight Line Voltage Housing NHIC-4G24AT = IC Air-Tight GU24 Housing NHRIC-4LMRAT = IC Air-Tight LED Remodel Housing NSRIC-404QAT = IC Air-Tight Line Voltage Housing NSR-404QAT = Non-IC Air-Tight Line Voltage Housing
- category
- environment
- voltage
- CCT
- spec delta
- lumens: 3126 → 1000
- spec →
Adaptive Diecast Aluminum faceplate design allows for Vertical or Horizontal orientation. Powder Coated Faceplate Vertical or Horizontal Mounting Integrated LED board and driver Diffused lens behind faceplate Wet location listed for outdoor use IC Rated for direct contact with insulation Mounts in a standard single gang box Life span of 50,000 hours L70 Input Voltage: 120V
- category
- environment
- voltage
- CCT
- spec →
“GEN 3” - LED DUAL SELECTABLE WALL PACK BUY AMERICA OPTION The BELMONT III GEN3 Series 9110G3 is traditional wall pack constructed out of a die-cast aluminum housing and tempered borosilicate glass lens. The unit comes standard with 0-10V dimming capability and three power ranges with a dual selectable platform, wattage and color temperature, on each for jobsite versatility. Options include a pre-installed photocell and Buy America Compliancy. IP65 rated.
- category
- environment
- mounting
- voltage
- lumens
- CCT
- +1 more
- voltage: 120V → 120-277V
Alset® LED wallpacks can replace HID lighting up to 400W MH or HPS for safety, security and general illumination. With both forward throw and downlight they provide excellent illumination and uniformity. Photocell option available. Uses include office buildings, shopping centers, restaurants, schools, warehouses, parking garages and other commercial applications.
- category
- environment
- mounting
- voltage
- lumens
- CCT
- +1 more
- voltage: 120V → 120-277V
- spec →
Designed with aesthetics as a high priority, the tasteful FVS8 combines style with strength. With architectural matte white paint standard, allow the FVS4 in either 16 or 18 gauge steel to operate in the most demanding environments. Thick polycarbonate lenses protect the fixture from high abuse situations, Continuous run the fixtures using the end KOs, and choose from 2', 3', 4', and 8' lengths
- category
- environment
- voltage
- CCT
- lens
- spec delta
- voltage: 120V → UNV
- spec →
The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.
- category
- environment
- voltage
- spec →
The Smart Wireless Dimming Kit makes HALO Home more accessible than ever with 2 smart A19 lamps and the touch-sensitive battery-powered Anyplace Dimmer. It is the perfect pairing for customers just getting started with HALO Home or a user finishing out a room. The only thing needed is the free HALO Home app and setup is simple with no hub or bridge required. Anyplace Dimmer + 2 Smart Bulbs: HHA19HWAS1BLE-2PK
- category
- environment
- voltage
- spec delta
- cct: 3000K → 2700/5000K
- spec →
A 3" aperture specification grade adjustable housing platform that accepts 75W maximum low voltage MR16 tungsten-halogen lamps. Suitable for 2x6 residential framing or shallow commercial installation. Integral Truvolt™ toroidal wound magnetic step down transformer with dual outputs compensates for dimmer losses providing full light output and is extremely low noise. Die cast lamp capsule facilitates aim and focus, unique heat sink configuration lower critical lamp pinch extending life. The platform is airtight to prevent energy loss, room drafts, dust marks on ceilings and reduce sound transmission. Insulation must be kept 3" away from top and sides of the housing. A complete fixture requires two components; a P3MR housing platform and a 3" IRiS optical element. Elements may be changed after installation to provide a variety of distributions.
- category
- environment
- voltage
- spec →
The XAS All-Selectable Area Site series delivers powerful, high-performance illumination with exceptional flexibility for a wide range of outdoor applications. Available in 180W and 300W configurations, it provides adjustable outputs up to 46,000 lumens, with selectable 3000K, 4000K, and 5000K color temperatures and Type III, IV, and V distributions. Each fixture features versatile mounting options and a twistlock photocell for streamlined installation and control. Designed for parking lots, roadways, and large outdoor spaces, the XAS series ensures reliable, efficient, and adaptable lighting performance.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V → 120-347V
- lumens: 3126 → 46000
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →