NHMICD34
Dedicated new construction housing for use in insulated ceilings can be in direct contact with thermal insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. Clearance: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Input Voltage: 120V or 120-277V Lumens / Wattage: Up to 2500lm / 24W Dimming Options: Phase (Triac/ELV) or 0-10V Compatible Trims: NRM3-41: 4" Round Reflector NRM3-42: 4" Round Baffle NRM3-43: 4" Square Reflector
Cross-References
30 equivalents across 30 brands
Compare top 3 →- spec →
OPTICS EVO® batwing distribution provides a uniform, wide angled general illumination on horizontal and vertical surfaces to create smooth edges and an even layer of light without hot spots or
- category
- environment
- voltage
- lumens
- wattage
- dimming
- +1 more
- voltage: 120V/277V → UNV
- spec →
-2803
- category
- environment
- voltage
- lumens
- wattage
- dimming
- +1 more
- voltage: 120V/277V → UNV
- spec →
The Lumencove® XT Dynamic White is a slim, IP66-rated LED luminaire for exterior cove lighting and tight space applications. The system offe...
- category
- environment
- voltage
- lumens
- wattage
- dimming
- +1 more
- voltage: 120V/277V → UNV
- spec →
Wired for 0-10V Dimming Single wall IC Airtight rated for Direct Contact with Insulation 120/277V Input Meets restricted air flow requirements (per ASTM E-283) cUL Listed for direct contact with Insulation cUL Listed for Damp Locations cUL Listed for Wet Location with Wet Location Rated Inserts cUL Listed for Feed Through CA Title 24 Compliant
- category
- environment
- voltage
- lumens
- wattage
- dimming
- spec →
- category
- environment
- voltage
- lumens
- wattage
- dimming
- +1 more
- voltage: 120V/277V → 120-277V/347V
- spec →
The Heron fixture is a variation of our Drum luminaire, one of the most popular and versatile options from Barbican. Heron helps to add some silence as well as aesthetic warmth, texture, and presence to a space combining the best elements of architectural and decorative lighting into a single luminaire.
- category
- environment
- voltage
- lumens
- dimming
- spec →
Durable and versatile fixture suitable for demanding environments that require a dust-proof fixture or watertight seal such as food-processing facilities, breweries, agricultural, wash down applications and cooler/freezer environments
- category
- environment
- voltage
- lumens
- dimming
- housing
- +1 more
- voltage: 120V/277V → 120V-277V
- wattage: 11W → 234W
- spec →
Designed for direct T-Grid mounting, the HTG-3 Surface T-Grid delivers seamless integration and high-performance illumination with a minimal 3" aperture and ultra-slim 1.38" depth. Featuring Microstructure EdgeTech Optics™ (MEO™), it offers optic options including Batwing, Glare Control, Diffused (Lambertian), and Wall Wash. Achieve clean, continuous runs up to 250 feet with no lens breaks or hotspots, and design flexibility with mitered lit corners. The innovative toolless “Push to Eject” system and flush T-Grid mounting make installation fast and clean. Supports 16' on-center spacing with Batwing optics and offers SLO outputs up to 1480 lm/ft, 90+ CRI, and Tunable White options. Available in custom powder coat finishes. Proudly made in Huntington Beach, CA and BABA compliant in most configurations.
- category
- environment
- voltage
- lumens
- wattage
- dimming
- +1 more
- voltage: 120V/277V → 120-277V, 347V
- spec →
The PFX 3629 With EM LED Double Ring Ceiling Flush Mount Light offers a sleek, modern lighting solution ideal for residential or commercial spaces. Designed for low maintenance and high energy efficiency, it features CCT selectable technology for customizable color temperatures. Available in 12", 14", and 16" sizes, this fixture is ETL certified and rated for damp locations, making it perfect for bathrooms, hallways, and covered outdoor areas.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 120V
- wattage: 11W → 26W
- spec →
A line voltage fixture perfect for Cove Lighting or Task Lighting areas where space, budget and energy are a factor. Boca’s CleanDim® technology ensures even dimming from 0-100%.
- category
- environment
- voltage
- wattage
- dimming
- spec delta
- voltage: 120V/277V → 120V
- spec →
The LITELUME™ Jelly Jar Hazardous Location (LL-JJHL) Class 1, Division 2 Luminaire is a low wattage security light specifically designed for general illumination at hazardous locations.
- category
- environment
- voltage
- lumens
- dimming
- spec delta
- voltage: 120V/277V → UNV
- wattage: 11W → 27W
- spec →
Bring contemporary style and reliable performance to your space with the Luminoso LED Surface Wall Light.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 120V
- wattage: 11W → 25W
- spec →
Unique Mission style design that emphasizes simple horizontal and vertical lines and flat panels are key architectural components. ADA compliant with a durable extruded white textured polycarbonate or optional Amber Honey, Beige, or Opal Alabaster lens. BAA/BABA Complaint
- category
- environment
- voltage
- dimming
- housing
- spec delta
- voltage: 120V/277V → UNV
- lumens: 2500 → 1170
- wattage: 11W → 20W
- spec →
Ideal for facilities that may not have access to the outside world via internet connection, the AirMesh Hub is a key component of the entire LED lighting system. It can switch lights off or on, or dim them to a specified level. Zones can be established so that lights in a particular area can be controlled separately from others. The system stores power data, behaviors, alarms and critical events locally for maintenance and troubleshooting.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 277V
- spec →
The low-profile Fail-Safe FWL, FWLSC and FWLDL are perfect where non-obtrusive confinement / vandal resistant products are required. Combining form and function, the FWL (up/down), FWLSC (sconce), and the FWLDL are perfect for mental health facilities, public transportation areas, psychiatric wards, detention centers, stairwells, corridors and schools
- category
- environment
- voltage
- lumens
- dimming
- housing
- +1 more
- voltage: 120V/277V → UNV
- spec →
Linear Dimming Control Module Plenum Rated (LDCM-PL) takes a 0-10V dimming signal and converts it to an ELV dimmed output for up to 1000W with a 277V load and 450W on a 120V load. The LDCM-PL is rated to directly mount to a junction box in a plenum space for easier installations and to meet building requirements.
- category
- environment
- voltage
- dimming
- spec delta
- wattage: 11W → 450W
- spec →
The Halo CLD is a easy to install, high performance, surface mount luminaire that offers the added flexibility of 3 selectable color temperatures at time of installation. CLD7 (7”) is designed for installation in many 3-1/2" and 4" square, octagon, or round junction boxes. Supply wire adapter with LED quick wiring connector included.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120V
- lumens: 2500 → 841
- spec →
3" aperture specification grade lens wall wash. Suitable for use with 75W maximum PAR16, PAR20 and low voltage tungsten-halogen or LED MR16 lamps, use also with integral LED light engine and reflectors. Linear spread lens and specular clear kicker combined with angle cut parabolic lower shielding reflector provided smooth vertical illumination
- category
- environment
- voltage
- dimming
- housing
- spec delta
- voltage: 120V/277V → 277V
- lumens: 2500 → 900
- wattage: 11W → 75W
- spec →
The WN Series is a surface wraparound luminaire featuring energy efficient performance. The luminaire's clean, low profile design is both appealing and functional. The WN Series utilizes a clear, low brightness, extruded acrylic refractor for high performance and aesthetics. The efficient and stylish WN Series is the perfect wraparound for commercial applications.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 120V
- wattage: 11W → 32W
- spec →
The Sure-Lites EBPLEDC1LV/HV is a LED emergency battery pack with 20V to 50V (LV) or 125V to 200V (HV) output.It converts LED fixtures to emergency fixtures w/ 90 minutes of run time. 20 watts of emergency power equals up to 2600 lumens of illumination during a power outage. It is UL1310 and CSA 22.2 listed for both factory or field installation.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → UNV
- wattage: 11W → 20W
- spec →
Juno® 4-inch internally adjustable, 700 lumen LED, IC-rated new construction housings cater to a wide range of application possibilities with just a change out of trims. Offering internal
- category
- environment
- voltage
- wattage
- dimming
- spec delta
- voltage: 120V/277V → UNV
- lumens: 2500 → 700
- spec →
SLOT 4 linear lighting delivers a simple line of light by creating brilliant illumination and exceptional visual comfort in a small form factor. SLOT 4 Surface delivers: Up to 1442 delivered LMF
- category
- environment
- voltage
- wattage
- dimming
- spec delta
- voltage: 120V/277V → UNV
- spec →
LITEISTRY™ LTR-6RD
- category
- environment
- voltage
- lumens
- dimming
- spec delta
- voltage: 120V/277V → UNV
- wattage: 11W → 22.7W
- spec →
CLSC Series
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 277V
- spec →
In-Grade Minivault
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
RWL2 Ratio
- category
- environment
- voltage
- lumens
- dimming
- spec delta
- voltage: 120V/277V → UNV
- wattage: 11W → 35W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Nora Lighting
Full directory →3 rep agencies carry the Nora Lighting line across 4 states. Pick your state.
Iowa IA1 agency
Statewide
Nebraska NE1 agency
Omaha
Nevada NV1 agency
Las Vegas
Wisconsin WI1 agency
- ERI / illuminateCurrent
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.