NE970
Wet location rated LED emergency luminaire with two adjustable heads. Luminaire is powered by LED sources for maximum life without maintenance. In the event of power loss, LED heads will operate for a minimum of 90 minutes. Ideal for egress lighting where splashing, non-corrosive liquids and dripping may occur. FEATURES Fully adjustable 2.5W LED emergency heads Wall Mounted UL Listed and meets or exceeds UL 924, NFPA 70 and NFPA 101 Life Safety Code requirements Polycarbonate plastic enclosure with flame retardant and wet location rated Self Diagnostic Testing Push-To-Test Switch High temperature maintenance free NiCad battery 120-277V AC input FACE Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. MOUNTING Mounting hardware included for wall mount applications. Listed for installations indoor, outdoor or wet locations. LABELS AND LISTINGS UL 924 Listed for Wet Locations NFPA 70 & NFPA 101 Life Safety Code California Energy Commission (CEC) Compliant
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →- spec →
LED Remote Capable Thermoplastic Emergency Unit Long lasting, efficient, ultra bright white LEDs. 1.0 watt (8 LEDs x 0.125 watt) per head. High performance chrome-plated metalized reflector and plastic lens for optimal light distribution. Adjustable LED lamp heads provides optimal center-to center spacing.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
The AtLite ATLEL series provides a NEMA 4X and UL924 code compliant emergency lighting solution for extreme commercial and industrial environments. The rugged die cast aluminum housing and UV stabilized polycarbonate lens are designed to withstand harsh environmental conditions. The fixture is wet location listed with a temperature rating of -30° to 50°C (-22° to 122°F), is IP66 listed and has a Hazardous location class 1 division 2 option. Two 300 lumen LED heads provide up to 58 feet of emergency egress coverage. Labor saving self diagnostics with a photocell testing capability are standard and perform required monthly and yearly testing. Tamper resistant screws are included to make the fixture vandal resistant.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → 277V/UNV
- spec →
The SureLites SEL LED remote series reduces overall cost and design time for a UL924 compliant emergency egress system. Key features include market leading spacing to reduce the number of fixtures required; universal voltage input from 4.8 V through 12 V and wet location rating as standard to reduce design time and mistake proof the ordering process; an LED source to eliminate lamp maintenance along with the quality and reliability you expect from Eaton products
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
The EMO2A Series features two LED fully adjustable lamp heads in a contemporary design. quick installation and premium options, in a stylish and economical package. This fixture offers quick installation and premium options in a stylish and economical package.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → UNV
- spec →
The AFB Series from the Lithonia Lighting® Basics™ Family is a rugged construction emergency light, offering quick installation and premium standard features such as die cast aluminum construction, a
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120-347
Mini Emergency Light with two 2W fully adjustable glare-free square shape light heads for emergency light. Injection-molded thermoplastic ABS housing Innovative snap-together design allows for fast and easy installation. 250 lm (total) 3.6V, 1.5Ah battery pack for 90 minutes of emergency operation. LED Driver: 120V/277V AC, dual voltage operation integrated with LED bulb. cUL listed for damp location.
- category
- environment
- voltage
- spec →
The LightLEEDer Emergency UL 924 bypass relay control panel will force relay's ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.
- category
- environment
- voltage
- spec delta
- wattage: 3W → 1W
- spec →
The EB5 fluorescent emergency ballast works in conjunction with the AC ballast to covert new or existing fluorescent fixtures into emergency lighting. When AC power fails, the EB5 immediately switches to the emergency mode, keeping one lamp illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the ballast automatically returns to the charging mode.
- category
- environment
- voltage
- lumens
- spec delta
- voltage: 120V/277V → UNV
- wattage: 3W → 17-40W
- spec →
The PARAFLEX PFX‑5541 is a decorative LED emergency lighting unit with universal 120–277V input, four 1.0‑watt LED heads, and a 90‑minute minimum runtime. It features a maintenance‑free NiMH battery, 5VA flame‑retardant thermoplastic housing, and is UL listed for damp locations. An optional self‑diagnostic feature is available.
- category
- environment
- voltage
- spec delta
- voltage: 120V/277V → UNV
- wattage: 3W → 1W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps Nora Lighting
Full directory →3 rep agencies carry the Nora Lighting line across 4 states. Pick your state.
Iowa IA1 agency
Statewide
Nebraska NE1 agency
Omaha
Nevada NV1 agency
Las Vegas
Wisconsin WI1 agency
- ERI / illuminateCurrent
Statewide
Line cards are directional — confirm coverage with the agency before routing a spec.