XPL1A040U50GR60T
The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D1 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →Long-lasting, energy-efficient LED step lights provide illumination for safety around steps, balcony areas, or walkways. Each step light includes five color temperatures, allowing the end user to decide the desired appearance. Durable cast zinc-magnesium face plates available in three finishes to match almost any decor. Efficient LED light sources are low-maintenance, offer 50,000-hour lamp life, and save over 80% in running costs compared to 18W incandescent step lights. Input Voltage: 120-277V Lumens / Wattage: 144lm / 4.6W Color Temperature: Selectable CCT (1800K / 2700K / 3000K / 4000K / 5000K) Dimming: Triac or ELV Housing: NSW-800 required
- category
- environment
- voltage
- CCT
- beam angle
- spec delta
- wattage: 80W → 10W
- spec →
IC Rated for direct contact with insulation, for use in IC and Non-IC applications Select Color Temperature (2700K to 5000K) and Lumen Output (850 lm to 1500 lm) by using manual switch on module Adjustable Focus Beam Angle allows for manual beam angle adjustment from 30˚ to 70˚ range with the easy of a twist Featured Twist-On mechanism to easily locked module to any size trim Encased Quick Connector for easy module installation Works in 4", 6", and 8" Commercial Frames, Remodel and Retrofit applications 120/277V input with 0-10V dimming Excellent color rendering 93+ CRI Meets Energy Star Requirements ETL listed for damp location Life span of 50,000 hours L70
- category
- environment
- voltage
- CCT
- spec delta
- wattage: 80W → 18W
- beam_angle: 115° → 30°
- spec →
THIS PRODUCT HAS BEEN DISCONTINUED FJAR LED Vaporproof Jars are designed to replace 100-watt incandescent or 23-watt CFL fixtures with high-quality, long-lasting illumination, no maintenance required. The fixture is IP66 rated against ingress of dust and pressurized water in harsh environments, and suitable for inverted mounting. Spec Sheets Find Rebate Free Layout Where to Buy
- category
- environment
- voltage
- CCT
- CRI
- housing
- +1 more
- voltage: 120V/277V → 277V
- wattage: 80W → 14W
- spec →
Housing: Heavy Duty Die Cast Aluminum Housing with Integral Heat Sinking, ¾˝ NPS Threaded Mount. Includes Spun Aluminum Shade, Field Removable. Listing & Ratings: ETL Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Prismatic UV-Stabilized Polycarbonate Lens Mounting: Fixed Mount or Adjustable Swivel with ¾˝ NPS Threads. EasyLED LED: Aluminum Boards Wattage: Array: 23w, System: 26.3w; (175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Construction: Heavy-Duty ¾˝ Aluminum Arms with ¾˝ NPS Threads on Fixture Mounting End. Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
- category
- environment
- voltage
- CCT
- spec delta
- wattage: 80W → 175W
- spec →
The RK97 is a Retrofit Kit designed to upgrade Hydrel® M9700 Series fixtures with Vista's 1188 LED technology. It facilitates easy installation without disturbing existing structures, offering the 1188's advanced COB LED features, over 3000 lumens output, and multiple CCT options. Ideal for commercial retrofitting, IP68 rated.
- category
- environment
- voltage
- CCT
- CRI
- housing
- +1 more
- voltage: 120V/277V → 120-277V
- wattage: 80W → 30W
- spec →
The energy-efficient housing is Air-Loc® sealed to stop infiltration and exfiltration of air, reducing heating and cooling costs. It is also IC-rated to be completely covered with insulation.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V → 120V
PackLume Compact The PKLM small full cutoff wall luminaire is available in three wattages with a specially designed Type IV wide forward throw optical distribution that is designed to replace HID lighting systems of up to 175W MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 12 to 25 feet can be used based on light level and uniformity requirements. BAA compliant. UL listed for wet location. IP66 rated.
- category
- environment
- voltage
- beam angle
- lens
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 3000K
- wattage: 80W → 43W
- spec →
The LAB Series crowned traditional acorn luminaire features a durable, corrosion-resistant aluminum fitter and crown with a high-impact clear acrylic globe - available in two globe sizes and includes multiple decorative fitter options. It utilizes a three-dimensional LED Power Array™ with individual tubes aimed for wide, efficient light distribution (Types II, III, IV, and V). Available in neutral, cool, and warm white LEDs, it offers lumen maintenance of L94 at 60,000 hours. The fixture supports dimming, is wet-location listed, and features a polyester powder coat finish for durability. Optional photocells, motion sensors, and fuses are available. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CRI
- beam angle
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 2700K
- wattage: 80W → 2W
The RCGV Series traditional luminaire is a line of 4-rung half-caged globes that feature a one-piece high-impact acrylic globe with a corrosion-resistant cast aluminum fitter and cage, ensuring durability. The standard fitter has a 3” I.D. opening for tenon mounting. The LED Power Array comprises individual LED tubes that provide uniform luminance and are sealed to an IP65 standard. The acrylic tube lens diffuses the raw LED light, while the optional 6" prismatic glass refractor offers precise optical control. Available in various color temperatures, the LEDs maintain high performance for up to 100,000 hours. BABA compliant. UL listed for wet location.
- category
- environment
- voltage
- CRI
- spec delta
- voltage: 120V/277V → UNV
- cct: 5000K → 2700K
- wattage: 80W → 2W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps NICOR Lighting
Full directory →27 rep agencies carry the Nicor Lighting line across 45 states. Pick your state.
Alabama AL1 agency
Birmingham · Mobile
Alaska AK1 agency
Statewide
Arizona AZ1 agency
Statewide
Arkansas AR1 agency
Statewide
California CA1 agency
Fresno · Sacramento · San Francisco
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Commercial Lighting SalesCurrent
Statewide
Florida FL2 agencies
Panhandle
Fort Myers · Jacksonville · Miami · Orlando · Tampa
+35 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.