XPL1A040U40GR60
The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D1 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.
Cross-References
Top equivalents — 12 across 12 brands
Compare top 3 →Long-lasting, energy-efficient LED step lights provide illumination for safety around steps, balcony areas, or walkways. Each step light includes five color temperatures, allowing the end user to decide the desired appearance. Durable cast zinc-magnesium face plates available in three finishes to match almost any decor. Efficient LED light sources are low-maintenance, offer 50,000-hour lamp life, and save over 80% in running costs compared to 18W incandescent step lights. Input Voltage: 120-277V Lumens / Wattage: 144lm / 4.6W Color Temperature: Selectable CCT (1800K / 2700K / 3000K / 4000K / 5000K) Dimming: Triac or ELV Housing: NSW-800 required
- category
- environment
- voltage
- CCT
- beam angle
- spec delta
- wattage: 80W → 10W
- spec →
IC Rated for direct contact with insulation, for use in IC and Non-IC applications Select Color Temperature (2700K to 5000K) and Lumen Output (850 lm to 1500 lm) by using manual switch on module Adjustable Focus Beam Angle allows for manual beam angle adjustment from 30˚ to 70˚ range with the easy of a twist Featured Twist-On mechanism to easily locked module to any size trim Encased Quick Connector for easy module installation Works in 4", 6", and 8" Commercial Frames, Remodel and Retrofit applications 120/277V input with 0-10V dimming Excellent color rendering 93+ CRI Meets Energy Star Requirements ETL listed for damp location Life span of 50,000 hours L70
- category
- environment
- voltage
- CCT
- spec delta
- wattage: 80W → 18W
- beam_angle: 115° → 30°
- spec →
Ø1-3/8” arm mount LED luminaire for outdoor locations, remote driver The BSW501 is a wet location, arm mounted LED luminaire, ideally suited for wall wash and facade lighting. The Ø1-3/8” extruded aluminum housing rotates on slender aluminum arms for flexible aiming. Each fixture is paired with a remote mounted, wet location 0-10V dimming or non-dimming driver and housing.
- category
- environment
- voltage
- CCT
- housing
- spec →
9-1/4″ dia. x 8-7/8″ h aluminum shade. Includes white opal acrylic bottom lens and brushed aluminum buttons. For standard ceiling or wall junction box mounting. DIMENSIONS 9-1/4″ diameter x 8-7/8″ height. CONSTRUCTION Aluminum shade, white opal acrylic bottom lens and brushed aluminum buttons. For standard ceiling or wall junction box mounting. UL listed, cUL (ETL/ETLc for LED) certified for dry locations. LAMPING/WATTAGE Fixtures supplied less lamps. Lamps may be ordered from d’ac. LED8 , 800 TOTAL LUMENS, 8W 1M60* 60W max, medium base, A type *Color Temperature Options: 2700, 3000K (standard), 3500K, and 4000K VOLTAGES 120 120V 277 277V FINISHES AL Brushed Aluminum PA Polished Aluminum Baked Enamels WH White Gloss MG Metallic Grey AN Metallic Anthracite BZ Metallic Bronze GM Metallic Green RD Metallic Red BL Metallic Blue CU Metallic Copper BG Black Gloss MB Matte Black BC Black Crinkle T1 Light Tan T2 Medium Tan G1 Light Grey G2 Medium Grey RB Bright Red YL Bright Yellow SF Seafoam MP Magenta Pink SCF Special Finish – must supply paint chip Download page d9000 for color renderings. OPTIONS DIM 0-10V dimming driver; compatible with dedicated LED lamping. Contact d’ac for additional dimming control capabilities. EMP External Emergency Ballast Specification Sheet
- category
- environment
- voltage
- CCT
- wattage
- spec →
The Dusk to Dawn LED generation 3 luminaire offers an economical solution with enhanced generation chip on board LED performance for general purpose area and security lighting. The luminaire can be direct mounted to vertical surfaces or mounted onto 1-1/2" O.D. arms. Arm is also available as an accessory ordered separately. A 120V NEMA twist lock photo cell is included as standard. This versatile luminaire easily retrofits onto existing arms and offers one of the most affordable and efficient energy saving solutions available.
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- voltage: 120V/277V → 120V
- wattage: 80W → 40W
- beam_angle: 115° → 5°
- spec →
Radiant™ LED Conformal Coating LED light engine CCT: Standard-4000K 2700K, Amber, LPS (1800K) Offered – Consult Factory Static Colors Available – Contact Factory Distribution Type IV Electrical Electronic Driver, 120-277V, 50/60Hz 0-10V Dimmable Driver Standard Surge Protection Included (6kV Line-Line; 10kV Line-Earth) Wall Mount For all Wall Mounted Fixtures, Back Plates Are Not Predrilled at the Factory. This Allows Installation Contractors the Ability to Match Mounting Holes (By Contractor) to Specified Mounting Surfaces. Housing & Arm Construction Cast Aluminum Cage with Roof Decorative Arms are Constructed From Extruded Tubes and/or Aluminum Sand Cast parts. Parts are Welded and then Heat Treated to a T6 Hardness for Maximum Strength Finish Super Durable Polyester Powder Coat Finish. Custom Finishes Available, Including Patinas and All RAL Colors. Listings & Ratings ETL Listed to UL 1598 Standard for Wet Location and IP66. LED is IP66 Rated Warranty 5 Year Limited Warranty Value Sets are preconfigured FIXTURE + ARM components in popular combinations that are made available with a simple catalog number. These configurations contain highly specified characteristics and when ordered as a Wall Mount Value Set are a greater value. Different configurations are available by ordering the standard product.
- category
- environment
- voltage
- CCT
- spec delta
- wattage: 80W → 30W
- spec →
RAIL66 system allows for slidable placement. IP66. Class I. IK08. Marine-grade, die-cast aluminum alloy. 5CE superior corrosion protection including PCS hardware. Silicone CCG® Controlled Compression Gasket. Safety glass lens, hinged. Including 1 ft of flexible cable enclosed in a stainless conduit, in-line connector and mounting clamp for installation to RAIL66 mounting system. CAD-optimized optics for superior illumination and glare control. Integral driver. OLC® One LED Concept. Advanced thermal management protects LEDs while optimizing lumens output. 0-10V Dimming comes standard with luminaire. Luminaire is factory-sealed and does not need to be opened during installation. Mount permits 355° rotation and 180° tilt. Specify product with 7 Digit product code – Finish Color. Accessories, such as mounting, optical, and electrical, must be specified separately. Example: XXX-XXXX-9004 (Black) + XXX-XXXX (Accessory 1)
- category
- environment
- voltage
- CCT
- lens
- spec delta
- wattage: 80W → 26W
- spec →
The RK97 is a Retrofit Kit designed to upgrade Hydrel® M9700 Series fixtures with Vista's 1188 LED technology. It facilitates easy installation without disturbing existing structures, offering the 1188's advanced COB LED features, over 3000 lumens output, and multiple CCT options. Ideal for commercial retrofitting, IP68 rated.
- category
- environment
- voltage
- CCT
- CRI
- housing
- +1 more
- voltage: 120V/277V → 120-277V
- wattage: 80W → 30W
- spec →
Origin by Atlas Lighting is our economy line of products that are designed to provide a highly competitive, lower-cost entry point to LED lighting. The Origin lineup of Wall Lights offers a range of lumen packages and housing sizes to meet a variety of different applications. The housings retain a traditional design that closely resembles older HID fixtures. This allows the customer to upgrade to LED gradually if needed, and reduces the additional work required, such as painting or repairing the wall.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → UNV
- wattage: 80W → 15W
- spec →
Enclosed wall luminaires in five sizes with different light outputs with LEDs or for fluorescent lamps. Hand-blown, three-ply opal glass and precise metal parts integrate to perfection. The three-ply opal glass distributes the neutral colored light from the lamps, softly and uniformly.
- category
- environment
- voltage
- CCT
- housing
- spec delta
- voltage: 120V/277V → UNV
- wattage: 80W → 16.3W
Cross-references are informational starting points — verify with the manufacturer before specifying or purchasing. Spot a bad match? Report it →
Local Reps
Who reps NICOR Lighting
Full directory →27 rep agencies carry the Nicor Lighting line across 45 states. Pick your state.
Alabama AL1 agency
Birmingham · Mobile
Alaska AK1 agency
Statewide
Arizona AZ1 agency
Statewide
Arkansas AR1 agency
Statewide
California CA1 agency
Fresno · Sacramento · San Francisco
Colorado CO1 agency
Statewide
Connecticut CT1 agency
Statewide
Delaware DE1 agency
Statewide
District of Columbia DC1 agency
- Commercial Lighting SalesCurrent
Statewide
Florida FL2 agencies
Panhandle
Fort Myers · Jacksonville · Miami · Orlando · Tampa
+35 more states in the full directory →
Line cards are directional — confirm coverage with the agency before routing a spec.